[PATCH v2 2/4] s3c: mach-real6410: add support for dm9000 ethernet

[Darius Augulis]

Add support for dm9000 etherbet chip to mach-real6410

Signed-off-by: Darius Augulis <augulis.darius at gmail.com>
---

Changelog since v1:
 - Fixed errors reported by checkpatch.pl
 - Spaces in indentation replaced by TABs

 arch/arm/mach-s3c64xx/mach-real6410.c |  103 +++++++++++++++++++++++++++------
 1 files changed, 83 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 937fe7d..d4d2190 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/dm9000.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <asm/mach-types.h>
@@ -24,6 +25,7 @@
 #include <asm/mach/map.h>
 #include <mach/map.h>
 #include <mach/s3c6410.h>
+#include <mach/regs-srom.h>
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
 
@@ -33,35 +35,73 @@
 
 static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 };
 
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	}
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+	&real6410_device_eth,
+};
+
 static void __init real6410_map_io(void)
 {
 	s3c64xx_init_io(NULL, 0);
@@ -71,6 +111,29 @@ static void __init real6410_map_io(void)
 
 static void __init real6410_machine_init(void)
 {
+	u32 cs1;
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }
 
 MACHINE_START(REAL6410, "REAL6410")