[PATCH v6 5/7] ARM: S5PV210: Access for DMCx registers

[Kyungmin Park]

On Wed, Aug 4, 2010 at 8:17 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> MyungJoo Ham wrote:
>>
>>       The CPUFREQ driver requires an access to DMCx registers. We
>> define physical addresses and mapping between physical and virtual
>> addresses of DMCx registers.
>>
>> Signed-off-by: MyungJoo Ham <myungjoo.ham at samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>>  arch/arm/mach-s5pv210/cpu.c              |   12 +++++++++++-
>>  arch/arm/mach-s5pv210/include/mach/map.h |    4 ++++
>>  2 files changed, 15 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
>> index 74d4c08..2066695 100644
>> --- a/arch/arm/mach-s5pv210/cpu.c
>> +++ b/arch/arm/mach-s5pv210/cpu.c
>> @@ -60,7 +60,17 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
>>               .pfn            = __phys_to_pfn(S5PV210_PA_SROMC),
>>               .length         = SZ_4K,
>>               .type           = MT_DEVICE,
>> -     }
>> +     }, {
>> +             .virtual        = (unsigned long)S5P_VA_DMC0,
>> +             .pfn            = __phys_to_pfn(S5PV210_PA_DMC0),
>> +             .length         = SZ_4K,
>> +             .type           = MT_DEVICE,
>> +     }, {
>> +             .virtual        = (unsigned long)S5P_VA_DMC1,
>> +             .pfn            = __phys_to_pfn(S5PV210_PA_DMC1),
>> +             .length         = SZ_4K,
>> +             .type           = MT_DEVICE,
>> +     },
>>  };
>>
>>  static void s5pv210_idle(void)
>> diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-
>> s5pv210/include/mach/map.h
>> index 17687f0..daf6456 100644
>> --- a/arch/arm/mach-s5pv210/include/mach/map.h
>> +++ b/arch/arm/mach-s5pv210/include/mach/map.h
>> @@ -108,4 +108,8 @@
>>  #define SAMSUNG_PA_ADC               S5PV210_PA_ADC
>>  #define SAMSUNG_PA_KEYPAD    S5PV210_PA_KEYPAD
>>
>> +/* DMC */
>
> No need an obvious comment like above...
>
>> +#define S5PV210_PA_DMC0              (0xF0000000)
>> +#define S5PV210_PA_DMC1              (0xF1400000)
>
> As I said, if you need adding new definition into the mach/map.h, please
> keep the address order like others.
> It can help to us for easily reading...

Good, good, good,

I'm really appreciate it if the same rules apply to LSI internal trees.
I hope you check it LSI codes also.

Thank you,
Kyungmin Park

>
>> +
>>  #endif /* __ASM_ARCH_MAP_H */
>> --
>
> And as I commented, to merge your 4th(previous, just adding VA) and 5th
> patch to one is better...just for adding DMC map IO.
>
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>