[patch 0/2] ARM: Disable outer cache before kexec call -V3

[Andrea Paterniani]

Il 03/08/2010 19.36, Gadiyar, Anand ha scritto:
> Andrea Paterniani wrote:
>    
>> Hi,
>>       I have applied your patches to kernel 2.6.35-rc4 running on my beagleboard.
>> I'm using kexec-tools-2.0.1.
>>
>> My u-boot bootargs is:
>>       console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait ip=192.168.2.13::255.255.255.0
>>
>> To restart the system I type:
>>   >  sync
>>   >  kexec -l /boot/zImage --append="console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait ip=192.168.2.13::255.255.255.0"
>>   >  kexec -e
>>
>> Not every time the system restart.
>> In some cases no output on the console after the following:
>>       Bye!
>>       Uncompressing Linux... done, booting the kernel.
>>
>> Any idea?
>>
>>      
> Can you try building your kernel with CONFIG_EARLY_PRINTK,
> and add the word "earlyprintk" to your bootargs?
>
>    
How to enable EARLY_PRINTK for ARM architecture?
Browsing kernel source I find arch/arm/kernel/early_printk.c but no way 
to enable CONFIG_EARLY_PRINTK from make menuconfig.
Is there any patch to have this config option for ARM?

- Andrea
>
>    
>> Il 05/07/2010 13.52, Thomas Gleixner ha scritto:
>>      
>>> The following patch series addresses the problem that the kexec code
>>> does not disable the outer cache before disabling the inner cache and
>>> jumping into the new kernel. This results in random crashes of the new
>>> kernel.
>>>
>>> Changes since version 2:
>>>
>>>    - Use CLEAN_INV_WAY in l2x0_flush_all according to Catalin
>>>
>>>    - Rename outer_cache_disable() to outer_disable()
>>>
>>>    - Added a  BUG_ON() when l2x0_inv_all() is called with L2 enabled.
>>>
>>> Thanks,
>>>
>>>        tglx
>>>
>>>
>>>
>>>        
>    

--