[PATCH 1/2] ARM: i.MX27 pcm970: Add camera support

[Michael Grzeschik]

Adds the glue code for the pcm970 baseboard. It has a power regulator
which is registered first and instrumented in an late_initcall to turn
on the power for the camera device.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
---
 arch/arm/mach-imx/pcm970-baseboard.c |  165 ++++++++++++++++++++++++++++++++++
 1 files changed, 165 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a40..1931e5d 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -20,15 +20,23 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/can/platform/sja1000.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <media/soc_camera.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mx2_cam.h>
+#include <mach/i2c.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int pcm970_pins[] = {
@@ -215,6 +223,104 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+/* count of GPIOs that are occupied by the CPU itself */
+#define MAX_INTERNAL_GPIO 192
+
+static unsigned long pcm970_camera_query_bus_param(struct soc_camera_link *icl)
+{
+	return SOCAM_DATAWIDTH_8;
+}
+
+static int pcm970_camera_set_bus_param(struct soc_camera_link *icl,
+		unsigned long flags)
+{
+	return 0;
+}
+
+static struct pca953x_platform_data pca9536_data = {
+	.gpio_base      = MAX_INTERNAL_GPIO,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info __initdata pcm970_i2c_devices[] = {
+	{
+		/* Must initialize before the camera(s) */
+		I2C_BOARD_INFO("pca953x", 0x41),
+		.type = "pca9536",
+		.platform_data = &pca9536_data,
+	},
+};
+
+static struct i2c_board_info __initdata pcm970_camera_mt9m001 = {
+		I2C_BOARD_INFO("mt9m001", 0x5d),
+		.type = "mt9m001",
+};
+
+static struct i2c_board_info __initdata pcm970_camera_mt9v022 = {
+		I2C_BOARD_INFO("mt9v022", 0x48),
+		.type = "mt9v022",
+};
+
+static struct i2c_board_info __initdata pcm970_camera_mt9m131 = {
+		I2C_BOARD_INFO("mt9m111", 0x48),
+		.type = "mt9m111",
+};
+
+static struct soc_camera_link iclink_mt9m001 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm970_camera_mt9m001,
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m001",
+	.query_bus_param = pcm970_camera_query_bus_param,
+	.set_bus_param	= pcm970_camera_set_bus_param,
+};
+
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm970_camera_mt9v022,
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9v022",
+	.query_bus_param = pcm970_camera_query_bus_param,
+	.set_bus_param	= pcm970_camera_set_bus_param,
+};
+
+static struct soc_camera_link iclink_mt9m131 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm970_camera_mt9m131,
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+	.query_bus_param = pcm970_camera_query_bus_param,
+	.set_bus_param	= pcm970_camera_set_bus_param,
+};
+
+static struct imxi2c_platform_data pcm038_i2c_0_data = {
+	.bitrate = 10000,
+};
+
+static struct platform_device pcm970_mt9m001 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_mt9m001,
+	},
+};
+
+static struct platform_device pcm970_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
+	},
+};
+
+static struct platform_device pcm970_mt9m131 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 2,
+	.dev	= {
+		.platform_data = &iclink_mt9m131,
+	},
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -230,4 +336,63 @@ void __init pcm970_baseboard_init(void)
 	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
+
+	i2c_register_board_info(0, pcm970_i2c_devices,
+		ARRAY_SIZE(pcm970_i2c_devices));
+
+	platform_device_register(&pcm970_mt9m001);
+	platform_device_register(&pcm970_mt9v022);
+	platform_device_register(&pcm970_mt9m131);
+
+	/* the first i2c master is used for devices on the baseboard */
+	imx27_add_i2c_imx0(&pcm038_i2c_0_data);
+}
+
+/*
+ * Ok, we have to deal with several situations here. We connect
+ * 10bit image sensors to a 8bit interface and we must make sure
+ * that the upper 8bit from the sensor are connected to the image
+ * interface. Some sensors have a i2c GPIO expander which controls
+ * a bus switch to fixup the routing. Mapper boards >= 1285.2 do
+ * the fixup without the need of a gpio switch.
+ * Set this parameter to '1' to use a camera with gpio switch on a
+ * newer mapper board to prevent the fixup being done twice.
+ */
+static int use_camera_gpio;
+core_param(use_camera_gpio, use_camera_gpio, int, 0444);
+
+struct mx2_camera_platform_data pcm970_camera = {
+	.clk  = 26600000,
+	.flags = MX2_CAMERA_HSYNC_HIGH | MX2_CAMERA_GATED_CLOCK |
+		MX2_CAMERA_PACK_DIR_MSB,
+};
+
+static int __init pcm970_baseboard_init_late(void)
+{
+	int ret;
+	struct regulator *regulator;
+
+	if (!machine_is_pcm038())
+		return 0;
+
+	regulator = regulator_get(NULL, "imx_cam_vcc");
+	if (IS_ERR(regulator))
+		pr_err("unable to get regulator: %ld\n", PTR_ERR(regulator));
+	else
+		regulator_enable(regulator);
+
+	/* Be sure this registers after the regulators */
+	mxc_register_device(&mx27_camera_device, &pcm970_camera);
+
+	ret = gpio_request(MAX_INTERNAL_GPIO, "camera");
+	if (!ret) {
+		printk(KERN_INFO "pcm970 camera: Found GPIO expander on camera, %susing it\n",
+				use_camera_gpio ? "" : "not ");
+		gpio_direction_output(MAX_INTERNAL_GPIO, !!use_camera_gpio);
+	} else
+		printk(KERN_INFO "pcm970 camera: No GPIO expander on camera found\n");
+
+	return 0;
 }
+late_initcall(pcm970_baseboard_init_late);
+
-- 
1.7.1