[PATCH V2] HRT support in Samsung S5P Platform
MADHAV SINGHCHAUHAN
singh.madhav at samsung.com
Mon Aug 2 01:21:59 EDT 2010
From: Madhav Singh <singh.madhav at samsung.com>
Date: Wed, 28 Jul 2010 12:25:11 +0530
Subject: [PATCH] HRT support in Samsung S5P Platform
From: Jaecheol Lee <jc.lee at samsung.com>
In this version of patch credits are corrected,and accepted reviewers
comment like removing 'default n' in Kconfig, removing redundant clock
source etc.
Signed-off-by: Jaecheol Lee <jc.lee at samsung.com>
Signed-off-by: Madhav Chauhan <singh.madhav at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/mach-s5pv210/Kconfig | 8 +
arch/arm/mach-s5pv210/include/mach/map.h | 3 +
arch/arm/plat-s5p/Makefile | 2 +-
arch/arm/plat-s5p/clock.c | 8 +-
arch/arm/plat-s5p/hr-time-rtc.c | 462 +++++++++++++++++++++++
arch/arm/plat-s5p/include/plat/regs-sys-timer.h | 63 +++
arch/arm/plat-samsung/Makefile | 2 +
arch/arm/plat-samsung/include/plat/regs-rtc.h | 4 +
8 files changed, 550 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/plat-s5p/hr-time-rtc.c
create mode 100644 arch/arm/plat-s5p/include/plat/regs-sys-timer.h
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 631019a..8b2c51f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -101,4 +101,12 @@ config MACH_SMDKC110
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
+config SAMSUNG_HRT_RTC_SYSTIMER
+ bool "HRtimer and Dynamic Tick support"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HIGH_RES_TIMERS
+ help
+ Support for HRtimer and Dynamic Tick system using RTC and SYSTEM timer
+
endif
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 17687f0..9d6cc3c 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -43,6 +43,9 @@
#define S5PV210_PA_SYSTIMER (0xE2600000)
+#define S5PC11X_PA_RTC (0xE2800000)
+#define S3C_PA_RTC S5PC11X_PA_RTC
+
#define S5PV210_PA_WATCHDOG (0xE2700000)
#define S5PV210_PA_UART (0xE2900000)
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 18c9e34..78f0af7 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -18,4 +18,4 @@ obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o irq-gpioint.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
-
+obj-$(CONFIG_SAMSUNG_HRT_RTC_SYSTIMER) += hr-time-rtc.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index b5e2552..e438ce3 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -89,7 +89,12 @@ struct clk clk_arm = {
.ctrlbit = 0,
};
-/* Possible clock sources for APLL Mux */
+struct clk clk_ext_xtal_rtc = {
+ .name = "XrtcXTI",
+ .id = -1,
+ .rate = 32768,
+};
+
static struct clk *clk_src_apll_list[] = {
[0] = &clk_fin_apll,
[1] = &clk_fout_apll,
@@ -149,6 +154,7 @@ static struct clk *s5p_clks[] __initdata = {
&clk_arm,
&clk_vpll,
&clk_xusbxti,
+ &clk_ext_xtal_rtc,
};
void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-s5p/hr-time-rtc.c b/arch/arm/plat-s5p/hr-time-rtc.c
new file mode 100644
index 0000000..a6b3ed6
--- /dev/null
+++ b/arch/arm/plat-s5p/hr-time-rtc.c
@@ -0,0 +1,462 @@
+/*
+ * linux/arch/arm/plat-s5p/hr-time-rtc.c
+ *
+ * S5PC11X Timers
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics
+ *
+ * S5PC11X (and compatible) HRT support using RTC and SYSTEM TIMER
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-rtc.h>
+#include <plat/regs-sys-timer.h>
+#include <mach/regs-irq.h>
+#include <mach/tick.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/*For SCHED_CLOCK*/
+static unsigned long long time_stamp;
+static unsigned long long s5pc11x_sched_timer_overflows;
+static unsigned long long old_overflows;
+static cycle_t last_ticks;
+
+/*
+ * Sched timer interrupt is not processed right after
+ * timer counter expired
+ */
+static unsigned int pending_irq;
+
+/*
+ * sched_timer_running
+ * 0 : sched timer stopped or not initialized
+ * 1 : sched timer started
+ */
+static unsigned int sched_timer_running;
+
+static void __iomem *rtc_base;
+static struct clk *clk_event;
+static int tick_timer_mode; /* 0: oneshot, 1: autoreload */
+
+#define RTC_CLOCK (32768)
+#define RTC_DEFAULT_TICK ((RTC_CLOCK / HZ) - 1)
+
+/*
+ * Helper functions
+ * s5pc11x_systimer_read() : Read from System timer register
+ * s5pc11x_systimer_write(): Write to System timer register
+ *
+ */
+static unsigned int s5pc11x_systimer_read(unsigned int *reg_offset)
+{
+ return __raw_readl(reg_offset);
+}
+
+static unsigned int s5pc11x_systimer_write(unsigned int *reg_offset,
+ unsigned int value)
+{
+ unsigned int temp_regs;
+
+ __raw_writel(value, reg_offset);
+
+ if (reg_offset == S5P_SYSTIMER_TCON) {
+ while (!(__raw_readl(S5P_SYSTIMER_INT_CSTAT) &
+ S5P_SYSTIMER_INT_TCON));
+ temp_regs = __raw_readl(S5P_SYSTIMER_INT_CSTAT);
+ temp_regs |= S5P_SYSTIMER_INT_TCON;
+ __raw_writel(temp_regs, S5P_SYSTIMER_INT_CSTAT);
+
+ } else if (reg_offset == S5P_SYSTIMER_ICNTB) {
+ while (!(__raw_readl(S5P_SYSTIMER_INT_CSTAT) &
+ S5P_SYSTIMER_INT_ICNTB));
+ temp_regs = __raw_readl(S5P_SYSTIMER_INT_CSTAT);
+ temp_regs |= S5P_SYSTIMER_INT_ICNTB;
+ __raw_writel(temp_regs, S5P_SYSTIMER_INT_CSTAT);
+
+ } else if (reg_offset == S5P_SYSTIMER_TCNTB) {
+ while (!(__raw_readl(S5P_SYSTIMER_INT_CSTAT) &
+ S5P_SYSTIMER_INT_TCNTB));
+ temp_regs = __raw_readl(S5P_SYSTIMER_INT_CSTAT);
+ temp_regs |= S5P_SYSTIMER_INT_TCNTB;
+ __raw_writel(temp_regs, S5P_SYSTIMER_INT_CSTAT);
+ }
+
+ return 0;
+}
+
+static void s5pc11x_rtc_set_tick(int enabled)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(rtc_base + S3C2410_RTCCON) & ~S3C_RTCCON_TICEN;
+ if (enabled)
+ tmp |= S3C_RTCCON_TICEN;
+ __raw_writel(tmp, rtc_base + S3C2410_RTCCON);
+}
+
+static void s5pc11x_tick_timer_setup(void);
+
+static void s5pc11x_tick_timer_start(unsigned long load_val,
+ int autoreset)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(rtc_base + S3C2410_RTCCON) &
+ ~(S3C_RTCCON_TICEN | S3C2410_RTCCON_RTCEN);
+ __raw_writel(tmp, rtc_base + S3C2410_RTCCON);
+
+ __raw_writel(load_val, rtc_base + S3C2410_TICNT);
+
+ tmp |= S3C_RTCCON_TICEN;
+
+ __raw_writel(tmp, rtc_base + S3C2410_RTCCON);
+}
+
+static void s5pc11x_tick_timer_stop(void)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(rtc_base + S3C2410_RTCCON) &
+ ~(S3C_RTCCON_TICEN | S3C2410_RTCCON_RTCEN);
+
+ __raw_writel(tmp, rtc_base + S3C2410_RTCCON);
+
+}
+
+static void s5pc11x_sched_timer_start(unsigned long load_val,
+ int autoreset)
+{
+ unsigned long tcon;
+ unsigned long tcnt;
+ unsigned long tcfg;
+
+ /* clock configuration setting and enable */
+ struct clk *clk;
+
+ tcnt = TICK_MAX; /* default value for tcnt */
+
+ /* initialize system timer clock */
+ tcfg = s5pc11x_systimer_read(S5P_SYSTIMER_TCFG);
+
+ tcfg &= ~S5P_SYSTIMER_TCLK_MASK;
+ tcfg |= S5P_SYSTIMER_TCLK_USB;
+
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCFG, tcfg);
+
+ /* TCFG must not be changed at run-time.
+ * If you want to change TCFG, stop timer(TCON[0] = 0)
+ */
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCON, 0);
+
+ /* read the current timer configuration bits */
+ tcon = s5pc11x_systimer_read(S5P_SYSTIMER_TCON);
+ tcfg = s5pc11x_systimer_read(S5P_SYSTIMER_TCFG);
+
+ clk = clk_get(NULL, "systimer");
+ if (IS_ERR(clk))
+ panic("failed to get clock[%s] for system timer", "systimer");
+
+ clk_enable(clk);
+
+ clk_put(clk);
+
+ tcfg &= ~S5P_SYSTIMER_TCLK_MASK;
+ tcfg |= S5P_SYSTIMER_TCLK_USB;
+ tcfg &= ~S5P_SYSTIMER_PRESCALER_MASK;
+
+ /* check to see if timer is within 16bit range... */
+ if (tcnt > TICK_MAX) {
+ panic("setup_timer: cannot configure timer!");
+ return;
+ }
+
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCFG, tcfg);
+
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCNTB, tcnt);
+
+ /* set timer con */
+ tcon = S5P_SYSTIMER_INT_AUTO | S5P_SYSTIMER_START |
+ S5P_SYSTIMER_AUTO_RELOAD;
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCON, tcon);
+
+ tcon |= S5P_SYSTIMER_INT_START;
+ s5pc11x_systimer_write(S5P_SYSTIMER_TCON, tcon);
+
+ /* Interrupt Start and Enable */
+ s5pc11x_systimer_write(S5P_SYSTIMER_INT_CSTAT,
+ (S5P_SYSTIMER_INT_ICNTEIE |
+ S5P_SYSTIMER_INT_EN));
+ sched_timer_running = 1;
+}
+
+/*
+ * RTC tick : count down to zero, interrupt, reload
+ */
+static int s5pc11x_tick_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ if (cycles == 0) /* Should be larger than 0 */
+ cycles = 1;
+ s5pc11x_tick_timer_start(cycles, 0);
+ return 0;
+}
+
+static void s5pc11x_tick_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ tick_timer_mode = 1;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ s5pc11x_tick_timer_stop();
+ tick_timer_mode = 0;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* Sched timer stopped */
+ sched_timer_running = 0;
+ /* Reset sched_clock variables after sleep/wakeup */
+ last_ticks = 0;
+ s5pc11x_sched_timer_overflows = 0;
+ old_overflows = 0;
+ pending_irq = 0;
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ s5pc11x_tick_timer_setup();
+ s5pc11x_sched_timer_start(~0, 1);
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_tick_timer = {
+ .name = "S5PC110 event timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = s5pc11x_tick_set_next_event,
+ .set_mode = s5pc11x_tick_set_mode,
+};
+
+irqreturn_t s5pc11x_tick_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_tick_timer;
+
+ __raw_writel(S3C_INTP_TIC, rtc_base + S3C_INTP);
+ /* In case of oneshot mode */
+ if (tick_timer_mode == 0)
+ s5pc11x_tick_timer_stop();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction s5pc11x_tick_timer_irq = {
+ .name = "rtc-tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = s5pc11x_tick_timer_interrupt,
+};
+
+static void s5pc11x_init_dynamic_tick_timer(unsigned long rate)
+{
+ tick_timer_mode = 1;
+
+ rtc_base = ioremap(S3C_PA_RTC, SZ_4K);
+
+ s5pc11x_tick_timer_stop();
+
+ s5pc11x_tick_timer_start((rate / HZ) - 1, 1);
+
+ clockevent_tick_timer.mult = div_sc(rate, NSEC_PER_SEC,
+ clockevent_tick_timer.shift);
+ clockevent_tick_timer.max_delta_ns =
+ clockevent_delta2ns(-1, &clockevent_tick_timer);
+ clockevent_tick_timer.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_tick_timer);
+
+ clockevent_tick_timer.cpumask = cpumask_of(0);
+ clockevents_register_device(&clockevent_tick_timer);
+
+ printk(KERN_INFO "mult[%u]\n", clockevent_tick_timer.mult);
+ printk(KERN_INFO "max_delta_ns[%u]\n", clockevent_tick_timer.max_delta_ns);
+ printk(KERN_INFO "min_delta_ns[%u]\n", clockevent_tick_timer.min_delta_ns);
+ printk(KERN_INFO "rate[%lu]\n", rate);
+ printk(KERN_INFO "HZ[%d]\n", HZ);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * SYSTEM TIMER ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+irqreturn_t s5pc11x_sched_timer_interrupt(int irq, void *dev_id)
+{
+ volatile unsigned int temp_cstat;
+
+ temp_cstat = s5pc11x_systimer_read(S5P_SYSTIMER_INT_CSTAT);
+ temp_cstat |= S5P_SYSTIMER_INT_STATS;
+
+ s5pc11x_systimer_write(S5P_SYSTIMER_INT_CSTAT, temp_cstat);
+
+ if (unlikely(pending_irq))
+ pending_irq = 0;
+ else
+ s5pc11x_sched_timer_overflows++;
+
+ return IRQ_HANDLED;
+}
+
+struct irqaction s5pc11x_systimer_irq = {
+ .name = "System timer",
+ .flags = IRQF_DISABLED ,
+ .handler = s5pc11x_sched_timer_interrupt,
+};
+
+static cycle_t s5pc11x_sched_timer_read(void)
+{
+ return (cycle_t)~__raw_readl(S5P_SYSTIMER_TCNTO);
+}
+
+struct clocksource clocksource_s5pc11x = {
+ .name = "clock_source_systimer",
+ .rating = 300,
+ .read = s5pc11x_sched_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void s5pc11x_init_clocksource(unsigned long rate)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ clocksource_s5pc11x.mult
+ = clocksource_khz2mult(rate/1000, clocksource_s5pc11x.shift);
+
+
+ s5pc11x_sched_timer_start(~0, 1);
+
+ if (clocksource_register(&clocksource_s5pc11x))
+ printk(err, clocksource_s5pc11x.name);
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long irq_flags;
+ cycle_t ticks, elapsed_ticks = 0;
+ unsigned long long increment = 0;
+ unsigned int overflow_cnt = 0;
+
+ local_irq_save(irq_flags);
+
+ if (likely(sched_timer_running)) {
+ overflow_cnt = (s5pc11x_sched_timer_overflows - old_overflows);
+
+ ticks = s5pc11x_sched_timer_read();
+
+ if (overflow_cnt) {
+ increment = (overflow_cnt - 1) *
+ (clocksource_cyc2ns(clocksource_s5pc11x.mask,
+ clocksource_s5pc11x.mult, clocksource_s5pc11x.shift));
+ elapsed_ticks = (clocksource_s5pc11x.mask - last_ticks) + ticks;
+ } else {
+ if (unlikely(last_ticks > ticks)) {
+ pending_irq = 1;
+ elapsed_ticks = (clocksource_s5pc11x.mask - last_ticks) + ticks;
+ s5pc11x_sched_timer_overflows++;
+ } else {
+ elapsed_ticks = (ticks - last_ticks);
+ }
+ }
+
+ time_stamp += (clocksource_cyc2ns(elapsed_ticks, clocksource_s5pc11x.mult, clocksource_s5pc11x.shift) + increment);
+
+ old_overflows = s5pc11x_sched_timer_overflows;
+ last_ticks = ticks;
+ }
+ local_irq_restore(irq_flags);
+
+ return time_stamp;
+}
+
+/*
+ * Event/Sched Timer initialization
+ */
+static void s5pc11x_timer_setup(void)
+{
+ unsigned long rate;
+
+ /* Setup event timer using XrtcXTI */
+ if (clk_event == NULL)
+ clk_event = clk_get(NULL, "XrtcXTI");
+ if (IS_ERR(clk_event))
+ panic("failed to get clock for event timer");
+ rate = clk_get_rate(clk_event);
+ s5pc11x_init_dynamic_tick_timer(rate);
+ s5pc11x_init_clocksource(rate);
+}
+
+static void s5pc11x_tick_timer_setup(void)
+{
+ unsigned long rate;
+
+ rate = clk_get_rate(clk_event);
+ s5pc11x_tick_timer_start((rate / HZ) - 1, 1);
+}
+
+static void __init s5pc11x_timer_init(void)
+{
+ /* Initialize variables before starting each timers */
+ last_ticks = 0;
+ s5pc11x_sched_timer_overflows = 0;
+ old_overflows = 0;
+ time_stamp = 0;
+ sched_timer_running = 0;
+ pending_irq = 0;
+ s5pc11x_timer_setup();
+ setup_irq(IRQ_RTC_TIC, &s5pc11x_tick_timer_irq);
+ setup_irq(IRQ_SYSTIMER, &s5pc11x_systimer_irq);
+}
+
+struct sys_timer s3c24xx_timer = {
+ .init = s5pc11x_timer_init,
+};
+
diff --git a/arch/arm/plat-s5p/include/plat/regs-sys-timer.h b/arch/arm/plat-s5p/include/plat/regs-sys-timer.h
new file mode 100644
index 0000000..912f1ac
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/regs-sys-timer.h
@@ -0,0 +1,63 @@
+/* arch/arm/plat-s5p/include/plat/regs-sys-timer.h
+ *
+ * Copyright (c) 2008 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5PC1XX System Timer configuration
+*/
+
+#ifndef __ASM_ARCH_REGS_SYS_TIMER_H
+#define __ASM_ARCH_REGS_SYS_TIMER_H
+
+#define S5P_SYSTIMERREG(x) (S5P_VA_SYSTIMER + (x))
+
+#define S5P_SYSTIMER_TCFG S5P_SYSTIMERREG(0x00)
+#define S5P_SYSTIMER_TCON S5P_SYSTIMERREG(0x04)
+#define S5P_SYSTIMER_TCNTB S5P_SYSTIMERREG(0x08)
+#define S5P_SYSTIMER_TCNTO S5P_SYSTIMERREG(0x0c)
+
+#define S5P_SYSTIMER_TFCNTB S5P_SYSTIMERREG(0x10)
+#define S5P_SYSTIMER_ICNTB S5P_SYSTIMERREG(0x18)
+#define S5P_SYSTIMER_ICNTO S5P_SYSTIMERREG(0x1c)
+#define S5P_SYSTIMER_INT_CSTAT S5P_SYSTIMERREG(0x20)
+
+/* Value for TCFG */
+#define S5P_SYSTIMER_TCLK_MASK (3<<12)
+#define S5P_SYSTIMER_TCLK_XXTI (0<<12)
+#define S5P_SYSTIMER_TCLK_RTC (1<<12)
+#define S5P_SYSTIMER_TCLK_USB (2<<12)
+#define S5P_SYSTIMER_TCLK_PCLK (3<<12)
+
+#define S5P_SYSTIMER_DIV_MASK (7<<8)
+#define S5P_SYSTIMER_DIV_1 (0<<8)
+#define S5P_SYSTIMER_DIV_2 (1<<8)
+#define S5P_SYSTIMER_DIV_4 (2<<8)
+#define S5P_SYSTIMER_DIV_8 (3<<8)
+#define S5P_SYSTIMER_DIV_16 (4<<8)
+
+#define S5P_SYSTIMER_TARGET_HZ 200
+#define S5P_SYSTIMER_PRESCALER 5
+#define S5P_SYSTIMER_PRESCALER_MASK (0x3f<<0)
+
+/* value for TCON */
+#define S5P_SYSTIMER_INT_AUTO (1<<5)
+#define S5P_SYSTIMER_INT_IMM (1<<4)
+#define S5P_SYSTIMER_INT_START (1<<3)
+#define S5P_SYSTIMER_AUTO_RELOAD (1<<2)
+#define S5P_SYSTIMER_IMM_UPDATE (1<<1)
+#define S5P_SYSTIMER_START (1<<0)
+
+/* Value for INT_CSTAT */
+#define S5P_SYSTIMER_INT_IWIE (1<<9)
+#define S5P_SYSTIMER_INT_TWIE (1<<10)
+#define S5P_SYSTIMER_INT_ICNTEIE (1<<6)
+#define S5P_SYSTIMER_INT_TCON (1<<5)
+#define S5P_SYSTIMER_INT_ICNTB (1<<4)
+#define S5P_SYSTIMER_INT_TCNTB (1<<2)
+#define S5P_SYSTIMER_INT_STATS (1<<1)
+#define S5P_SYSTIMER_INT_EN (1<<0)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 8269d80..a61c93c 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,7 +12,9 @@ obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o
+ifndef CONFIG_SAMSUNG_HRT_RTC_SYSTIMER
obj-y += time.o
+endif
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 65c190d..da1abf6 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -21,6 +21,10 @@
#define S3C2410_RTCCON_CNTSEL (1<<2)
#define S3C2410_RTCCON_CLKRST (1<<3)
#define S3C64XX_RTCCON_TICEN (1<<8)
+#define S3C_INTP S3C2410_RTCREG(0X30)
+#define S3C_INTP_ALM (1<<1)
+#define S3C_INTP_TIC (1<<0)
+#define S3C_RTCCON_TICEN (1<<8)
#define S3C64XX_RTCCON_TICMSK (0xF<<7)
#define S3C64XX_RTCCON_TICSHT (7)
--
1.6.0.4
More information about the linux-arm-kernel
mailing list