[PATCH] DMAENGINE: DMA40 U8500 platform configuration v4
Linus Walleij
linus.walleij at stericsson.com
Tue Apr 27 15:09:04 EDT 2010
This completes the DMA40 support with the platform-specific
configuration for U8500/DB8500.
Signed-off-by: Linus Walleij <linus.walleij at stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
Cc: STEricsson_nomadik_linux at list.st.com
Cc: Alessandro Rubini <rubini at unipv.it>
---
Changes v3->v4:
Rebased on top of Rabin Vincents board restructuring patches
will put this in Russells patch tracker right after Rabins
patch series. It depends on both the board cleanups and the
DMA40 DMAENGINE itself merged in Dan Williams -next tree.
---
arch/arm/mach-ux500/board-mop500.c | 2 +-
arch/arm/mach-ux500/clock.c | 2 +-
arch/arm/mach-ux500/cpu-db8500.c | 4 +
arch/arm/mach-ux500/devices-db8500.c | 219 ++++++++++++++++++++++++
arch/arm/mach-ux500/include/mach/db8500-regs.h | 12 ++
arch/arm/mach-ux500/include/mach/devices.h | 3 +
arch/arm/mach-ux500/ste-dma40-db8500.h | 133 ++++++++++++++
7 files changed, 373 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-ux500/ste-dma40-db8500.h
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 072196c..f15efbf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -137,7 +137,7 @@ static void __init u8500_init_machine(void)
u8500_init_devices();
}
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+MACHINE_START(NOMADIK, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com> */
.phys_io = U8500_UART2_BASE,
.io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index c325dad..2e4ad66 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -407,7 +407,7 @@ static struct clk_lookup u8500_common_clks[] = {
CLK(apetraceclk, "apetrace", NULL),
CLK(mcdeclk, "mcde", NULL),
CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40", NULL),
+ CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index d04299f..6c5e202 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,6 +32,7 @@ static struct platform_device *platform_devs[] __initdata = {
&u8500_gpio_devs[6],
&u8500_gpio_devs[7],
&u8500_gpio_devs[8],
+ &u8500_dma40_device,
};
/* minimum static i/o mapping required to boot U8500 platforms */
@@ -71,6 +72,9 @@ void __init u8500_init_devices(void)
{
ux500_init_devices();
+ if (cpu_is_u8500ed())
+ dma40_u8500ed_updates();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 2033423..6a61e2d 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,9 +12,13 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
+#include <plat/ste_dma40.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
+#include "ste-dma40-db8500.h"
+
static struct nmk_gpio_platform_data u8500_gpio_data[] = {
GPIO_DATA("GPIO-0-31", 0),
GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
@@ -105,3 +109,218 @@ struct platform_device u8500_i2c4_device = {
.resource = u8500_i2c4_resources,
.num_resources = ARRAY_SIZE(u8500_i2c4_resources),
};
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U8500_DMA_BASE,
+ .end = U8500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U8500_DMA_LCPA_BASE,
+ .end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = U8500_DMA_LCLA_BASE,
+ .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcla",
+ },
+ [3] = {
+ .start = IRQ_DMA,
+ .end = IRQ_DMA,
+ .flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_PCHAN_BASIC_MODE),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+ STEDMA40_NO_TIM_FOR_LINK),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+const static dma_addr_t dma40_tx_map[STEDMA40_DEV_MAX] = {
+ [STEDMA40_DEV_SPI0_TX] = 0,
+ [STEDMA40_DEV_SD_MMC0_TX] = 0,
+ [STEDMA40_DEV_SD_MMC1_TX] = 0,
+ [STEDMA40_DEV_SD_MMC2_TX] = 0,
+ [STEDMA40_DEV_I2C1_TX] = 0,
+ [STEDMA40_DEV_I2C3_TX] = 0,
+ [STEDMA40_DEV_I2C2_TX] = 0,
+ [STEDMA40_DEV_SSP0_TX] = 0,
+ [STEDMA40_DEV_SSP1_TX] = 0,
+ [STEDMA40_DEV_UART2_TX] = 0,
+ [STEDMA40_DEV_UART1_TX] = 0,
+ [STEDMA40_DEV_UART0_TX] = 0,
+ [STEDMA40_DEV_MSP2_TX] = 0,
+ [STEDMA40_DEV_I2C0_TX] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_8] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_1_9] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_2_10] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_3_11] = 0,
+ [STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0] = 0,
+ [STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1] = 0,
+ [STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2] = 0,
+ [STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3] = 0,
+ [STEDMA40_DEV_DST_SXA0_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA1_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA2_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA3_RX_TX] = 0,
+ [STEDMA40_DEV_SD_MM2_TX] = 0,
+ [STEDMA40_DEV_SD_MM0_TX] = 0,
+ [STEDMA40_DEV_MSP1_TX] = 0,
+ [STEDMA40_SLIM0_CH0_TX] = 0,
+ [STEDMA40_DEV_MSP0_TX] = 0,
+ [STEDMA40_DEV_SD_MM1_TX] = 0,
+ [STEDMA40_DEV_SPI2_TX] = 0,
+ [STEDMA40_DEV_I2C3_TX2] = 0,
+ [STEDMA40_DEV_SPI1_TX] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_4_12] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_5_13] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_6_14] = 0,
+ [STEDMA40_DEV_USB_OTG_OEP_7_15] = 0,
+ [STEDMA40_DEV_SPI3_TX] = 0,
+ [STEDMA40_DEV_SD_MM3_TX] = 0,
+ [STEDMA40_DEV_SD_MM4_TX] = 0,
+ [STEDMA40_DEV_SD_MM5_TX] = 0,
+ [STEDMA40_DEV_DST_SXA4_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA5_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA6_RX_TX] = 0,
+ [STEDMA40_DEV_DST_SXA7_RX_TX] = 0,
+ [STEDMA40_DEV_CAC1_TX] = 0,
+ [STEDMA40_DEV_CAC1_TX_HAC1_TX] = 0,
+ [STEDMA40_DEV_HAC1_TX] = 0,
+ [STEDMA40_DEV_CAC0_TX] = 0,
+ [STEDMA40_DEV_CAC0_TX_HAC0_TX] = 0,
+ [STEDMA40_DEV_HAC0_TX] = 0,
+};
+
+/* Mapping between source event lines and physical device address */
+const static dma_addr_t dma40_rx_map[STEDMA40_DEV_MAX] = {
+ [STEDMA40_DEV_SPI0_RX] = 0,
+ [STEDMA40_DEV_SD_MMC0_RX] = 0,
+ [STEDMA40_DEV_SD_MMC1_RX] = 0,
+ [STEDMA40_DEV_SD_MMC2_RX] = 0,
+ [STEDMA40_DEV_I2C1_RX] = 0,
+ [STEDMA40_DEV_I2C3_RX] = 0,
+ [STEDMA40_DEV_I2C2_RX] = 0,
+ [STEDMA40_DEV_SSP0_RX] = 0,
+ [STEDMA40_DEV_SSP1_RX] = 0,
+ [STEDMA40_DEV_MCDE_RX] = 0,
+ [STEDMA40_DEV_UART2_RX] = 0,
+ [STEDMA40_DEV_UART1_RX] = 0,
+ [STEDMA40_DEV_UART0_RX] = 0,
+ [STEDMA40_DEV_MSP2_RX] = 0,
+ [STEDMA40_DEV_I2C0_RX] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_8] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_1_9] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_2_10] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_3_11] = 0,
+ [STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0] = 0,
+ [STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1] = 0,
+ [STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2] = 0,
+ [STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3] = 0,
+ [STEDMA40_DEV_SRC_SXA0_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA1_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA2_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA3_RX_TX] = 0,
+ [STEDMA40_DEV_SD_MM2_RX] = 0,
+ [STEDMA40_DEV_SD_MM0_RX] = 0,
+ [STEDMA40_DEV_MSP1_RX] = 0,
+ [STEDMA40_SLIM0_CH0_RX] = 0,
+ [STEDMA40_DEV_MSP0_RX] = 0,
+ [STEDMA40_DEV_SD_MM1_RX] = 0,
+ [STEDMA40_DEV_SPI2_RX] = 0,
+ [STEDMA40_DEV_I2C3_RX2] = 0,
+ [STEDMA40_DEV_SPI1_RX] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_4_12] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_5_13] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_6_14] = 0,
+ [STEDMA40_DEV_USB_OTG_IEP_7_15] = 0,
+ [STEDMA40_DEV_SPI3_RX] = 0,
+ [STEDMA40_DEV_SD_MM3_RX] = 0,
+ [STEDMA40_DEV_SD_MM4_RX] = 0,
+ [STEDMA40_DEV_SD_MM5_RX] = 0,
+ [STEDMA40_DEV_SRC_SXA4_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA5_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA6_RX_TX] = 0,
+ [STEDMA40_DEV_SRC_SXA7_RX_TX] = 0,
+ [STEDMA40_DEV_CAC1_RX] = 0,
+ [STEDMA40_DEV_MSHC_RX] = 0,
+ [STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4] = 0,
+ [STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5] = 0,
+ [STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6] = 0,
+ [STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7] = 0,
+ [STEDMA40_DEV_CAC0_RX] = 0,
+};
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+ STEDMA40_MEMCPY_TX_1,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = STEDMA40_DEV_MAX,
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .llis_per_log = 8,
+};
+
+struct platform_device u8500_dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+void dma40_u8500ed_updates(void)
+{
+ dma40_plat_data.memcpy = NULL;
+ dma40_plat_data.memcpy_len = 0;
+ dma40_resources[0].start = U8500_DMA_BASE_ED;
+ dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9169e1e..85fc6a8 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -7,6 +7,18 @@
#ifndef __MACH_DB8500_REGS_H
#define __MACH_DB8500_REGS_H
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE 0x40000000
+#define U8500_ESRAM_BANK_SIZE 0x00020000
+#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000)
+
#define U8500_PER3_BASE 0x80000000
#define U8500_STM_BASE 0x80100000
#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 0422af0..e3d006e 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -25,5 +25,8 @@ extern struct platform_device ux500_i2c3_device;
extern struct platform_device u8500_i2c0_device;
extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+
+void dma40_u8500ed_updates(void);
#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 0000000..8a4994e
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden at stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg at stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_DEV_MAX 64
+
+enum dma_src_dev_type {
+ STEDMA40_DEV_SPI0_RX = 0,
+ STEDMA40_DEV_SD_MMC0_RX,
+ STEDMA40_DEV_SD_MMC1_RX,
+ STEDMA40_DEV_SD_MMC2_RX,
+ STEDMA40_DEV_I2C1_RX,
+ STEDMA40_DEV_I2C3_RX,
+ STEDMA40_DEV_I2C2_RX,
+ STEDMA40_DEV_SSP0_RX = 8,
+ STEDMA40_DEV_SSP1_RX,
+ STEDMA40_DEV_MCDE_RX,
+ STEDMA40_DEV_UART2_RX,
+ STEDMA40_DEV_UART1_RX,
+ STEDMA40_DEV_UART0_RX,
+ STEDMA40_DEV_MSP2_RX,
+ STEDMA40_DEV_I2C0_RX, /*15*/
+ STEDMA40_DEV_USB_OTG_IEP_8,
+ STEDMA40_DEV_USB_OTG_IEP_1_9,
+ STEDMA40_DEV_USB_OTG_IEP_2_10,
+ STEDMA40_DEV_USB_OTG_IEP_3_11,
+ STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0,
+ STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1,
+ STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2,
+ STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3,
+ STEDMA40_DEV_SRC_SXA0_RX_TX,
+ STEDMA40_DEV_SRC_SXA1_RX_TX,
+ STEDMA40_DEV_SRC_SXA2_RX_TX,
+ STEDMA40_DEV_SRC_SXA3_RX_TX,
+ STEDMA40_DEV_SD_MM2_RX,
+ STEDMA40_DEV_SD_MM0_RX,
+ STEDMA40_DEV_MSP1_RX,
+ STEDMA40_SLIM0_CH0_RX,
+ STEDMA40_DEV_MSP0_RX = STEDMA40_SLIM0_CH0_RX,
+ STEDMA40_DEV_SD_MM1_RX,
+ STEDMA40_DEV_SPI2_RX,
+ STEDMA40_DEV_I2C3_RX2,
+ STEDMA40_DEV_SPI1_RX,
+ STEDMA40_DEV_USB_OTG_IEP_4_12,
+ STEDMA40_DEV_USB_OTG_IEP_5_13,
+ STEDMA40_DEV_USB_OTG_IEP_6_14,
+ STEDMA40_DEV_USB_OTG_IEP_7_15,
+ STEDMA40_DEV_SPI3_RX,
+ STEDMA40_DEV_SD_MM3_RX,
+ STEDMA40_DEV_SD_MM4_RX,
+ STEDMA40_DEV_SD_MM5_RX,
+ STEDMA40_DEV_SRC_SXA4_RX_TX,
+ STEDMA40_DEV_SRC_SXA5_RX_TX,
+ STEDMA40_DEV_SRC_SXA6_RX_TX,
+ STEDMA40_DEV_SRC_SXA7_RX_TX,
+ STEDMA40_DEV_CAC1_RX,
+ STEDMA40_DEV_MSHC_RX = 51,
+ STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4,
+ STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5,
+ STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6,
+ STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7,
+ STEDMA40_DEV_CAC0_RX = 61,
+};
+
+enum dma_dest_dev_type {
+ STEDMA40_DEV_SPI0_TX = 0,
+ STEDMA40_DEV_SD_MMC0_TX,
+ STEDMA40_DEV_SD_MMC1_TX,
+ STEDMA40_DEV_SD_MMC2_TX,
+ STEDMA40_DEV_I2C1_TX,
+ STEDMA40_DEV_I2C3_TX,
+ STEDMA40_DEV_I2C2_TX,
+ STEDMA40_DEV_SSP0_TX = 8,
+ STEDMA40_DEV_SSP1_TX,
+ STEDMA40_DEV_UART2_TX = 11,
+ STEDMA40_DEV_UART1_TX,
+ STEDMA40_DEV_UART0_TX,
+ STEDMA40_DEV_MSP2_TX,
+ STEDMA40_DEV_I2C0_TX,
+ STEDMA40_DEV_USB_OTG_OEP_8,
+ STEDMA40_DEV_USB_OTG_OEP_1_9,
+ STEDMA40_DEV_USB_OTG_OEP_2_10,
+ STEDMA40_DEV_USB_OTG_OEP_3_11,
+ STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0,
+ STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1,
+ STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2,
+ STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3,
+ STEDMA40_DEV_DST_SXA0_RX_TX,
+ STEDMA40_DEV_DST_SXA1_RX_TX,
+ STEDMA40_DEV_DST_SXA2_RX_TX,
+ STEDMA40_DEV_DST_SXA3_RX_TX,
+ STEDMA40_DEV_SD_MM2_TX,
+ STEDMA40_DEV_SD_MM0_TX,
+ STEDMA40_DEV_MSP1_TX,
+ STEDMA40_SLIM0_CH0_TX,
+ STEDMA40_DEV_MSP0_TX = STEDMA40_SLIM0_CH0_TX,
+ STEDMA40_DEV_SD_MM1_TX,
+ STEDMA40_DEV_SPI2_TX,
+ STEDMA40_DEV_I2C3_TX2,
+ STEDMA40_DEV_SPI1_TX,
+ STEDMA40_DEV_USB_OTG_OEP_4_12,
+ STEDMA40_DEV_USB_OTG_OEP_5_13,
+ STEDMA40_DEV_USB_OTG_OEP_6_14,
+ STEDMA40_DEV_USB_OTG_OEP_7_15,
+ STEDMA40_DEV_SPI3_TX,
+ STEDMA40_DEV_SD_MM3_TX,
+ STEDMA40_DEV_SD_MM4_TX,
+ STEDMA40_DEV_SD_MM5_TX,
+ STEDMA40_DEV_DST_SXA4_RX_TX,
+ STEDMA40_DEV_DST_SXA5_RX_TX,
+ STEDMA40_DEV_DST_SXA6_RX_TX,
+ STEDMA40_DEV_DST_SXA7_RX_TX,
+ STEDMA40_DEV_CAC1_TX,
+ STEDMA40_DEV_CAC1_TX_HAC1_TX,
+ STEDMA40_DEV_HAC1_TX,
+ STEDMA40_MEMCPY_TX_1 = 56,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+ STEDMA40_DEV_CAC0_TX = 61,
+ STEDMA40_DEV_CAC0_TX_HAC0_TX,
+ STEDMA40_DEV_HAC0_TX,
+};
+
+#endif
--
1.6.3.3
More information about the linux-arm-kernel
mailing list