[PATCH v3 2/5(7)] OMAP1: Amstrad Delta: add a handler for processing interrupts generated by the FIQ routine

[Tony Lindgren]

* Janusz Krzysztofik <jkrzyszt at tis.icnet.pl> [100414 19:24]:
> This patch introduces an IRQ handler used for processing interrupts generated
> by the FIQ handler when it decides there are data ready for processing.
> 
> The handler further invokes device specific interrupt routines based on an
> interrupt source as passed from the FIQ handler.
> 
> It can be registered by the board as a handler for the otherwise unused 32k
> timer interrupt.
> 
> Created and tested against linux-2.6.34-rc4.
> Applies on top of PATCH v3 1/5(7), "OMAP1: Amstrad Delta: add FIQ handler for 
> serial keyboard port interrupt processing".
> 
> Signed-off-by: Janusz Krzysztofik <jkrzyszt at tis.icnet.pl>
> ---
> v2 changes:
> - add fiq_buffer[] declaration missing from the header file,
> - refresh against 2.6.34-rc2.
> v3 changes:
> - follow Dmitry's serio cleanup suggestions here as well,
> - follow default OMAP GPIO interrupt processing path more closely,
> - more optimizations and cleanups.
> 
>  arch/arm/mach-omap1/Makefile                     |    2
>  arch/arm/mach-omap1/ams-delta-fiq.c              |  155 +++++++++++++++++++++++
>  arch/arm/mach-omap1/include/mach/ams-delta-fiq.h |    7 +
>  3 files changed, 163 insertions(+), 1 deletion(-)
> 
> diff -uprN git.orig/arch/arm/mach-omap1/Makefile git/arch/arm/mach-omap1/Makefile
> --- git.orig/arch/arm/mach-omap1/Makefile	2010-04-14 22:35:22.000000000 +0200
> +++ git/arch/arm/mach-omap1/Makefile	2010-04-14 23:18:10.000000000 +0200
> @@ -37,7 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= boar
>  obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
>  obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
>  obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
> -obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq-handler.o
> +obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
>  obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
>  obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o

Do you really need a separate option for CONFIG_AMS_DELTA_FIQ?
To me it seems you can just compile it in when CONFIG_MACH_AMS_DELTA
is selected.

Also, please make sure the FIQ only gets initialized for the right
board when multiple boards are compiled in.

Regards,

Tony