[PATCH 2.6.34-rc4 7/8] mx5: Add USB to Freescale MX51 Babbage

[Nguyen Dinh-R00091]

The 8th patch was for a USB timeout change that was sent to the USB
maintainer. Thanks everyone for their comments, I am almost ready with
another set with review comments taken into consideration.

Dinh 

-----Original Message-----
From: Bryan Wu [mailto:bryan.wu at canonical.com] 
Sent: Wednesday, April 14, 2010 1:33 AM
To: Nguyen Dinh-R00091
Cc: linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
linux at arm.linux.org.uk; s.hauer at pengutronix.de;
valentin.longchamp at epfl.ch; daniel at caiaq.de; grant.likely at secretlab.ca;
Herring Robert-RA7055; amit.kucheria at canonical.com
Subject: Re: [PATCH 2.6.34-rc4 7/8] mx5: Add USB to Freescale MX51
Babbage

This patch looks OK for me, but I failed to find the 8th patch of this
patchset.
Did you forget to send it out?

-Bryan

On 04/13/2010 09:10 AM, Dinh.Nguyen at freescale.com wrote:
> From: Dinh Nguyen<Dinh.Nguyen at freescale.com>
>
> Updade mx51_defconfig to include USB host support.
> This patch applies to 2.6.34-rc4.
>
> Signed-off-by: Dinh Nguyen<Dinh.Nguyen at freescale.com>
> ---
>   arch/arm/configs/mx51_defconfig |   17 ++++++++++++++++-
>   1 files changed, 16 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/configs/mx51_defconfig 
> b/arch/arm/configs/mx51_defconfig index c88e952..a708fd6 100644
> --- a/arch/arm/configs/mx51_defconfig
> +++ b/arch/arm/configs/mx51_defconfig
> @@ -809,7 +809,22 @@ CONFIG_SSB_POSSIBLE=y
>   CONFIG_DUMMY_CONSOLE=y
>   # CONFIG_SOUND is not set
>   # CONFIG_HID_SUPPORT is not set
> -# CONFIG_USB_SUPPORT is not set
> +CONFIG_USB_SUPPORT=y
> +CONFIG_USB_ARCH_HAS_HCD=y
> +# CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y 
> +CONFIG_USB=y
> +
> +#
> +# USB Host Controller Drivers
> +#
> +# CONFIG_USB_C67X00_HCD is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
> +# CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_MXC=y
> +
> +
>   CONFIG_MMC=y
>   # CONFIG_MMC_DEBUG is not set
>   # CONFIG_MMC_UNSAFE_RESUME is not set