[PATCH 2.6.34-rc4 6/8] mx5: Add USB support for Freescale MX51 Babbage
Bryan Wu
bryan.wu at canonical.com
Wed Apr 14 02:20:46 EDT 2010
On 04/13/2010 09:10 AM, Dinh.Nguyen at freescale.com wrote:
> From: Dinh Nguyen<Dinh.Nguyen at freescale.com>
>
> This patch updates the clocks, gpios, iomuxing and device structures for
> enabling USB Host functionality on Freescale MX51 Babbage HW.
> This patch applies to 2.6.34-rc4.
>
> Signed-off-by: Dinh Nguyen<Dinh.Nguyen at freescale.com>
> ---
> arch/arm/mach-mx5/board-mx51_babbage.c | 40 +++++++++++++++++++++++++-
> arch/arm/mach-mx5/clock-mx51.c | 8 +++++
> arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++
> arch/arm/mach-mx5/devices.h | 2 +
> 4 files changed, 98 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index 1338d6a..ddfa48b 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -13,6 +13,7 @@
> #include<linux/init.h>
> #include<linux/platform_device.h>
> #include<linux/gpio.h>
> +#include<linux/delay.h>
>
> #include<mach/common.h>
> #include<mach/hardware.h>
> @@ -30,6 +31,8 @@
> extern void __init mx5_usb_dr_init(void);
> extern void __init mx5_usbh1_init(void);
>
> +#define GPIO_1_7 (0*32+7)
> +
As this GPIO used below, it is better to name it just as
#define GPIO_USB_RESET 7 /* GPIO_1_7 */
> static struct platform_device *devices[] __initdata = {
> &mxc_fec_device,
> };
> @@ -50,6 +53,22 @@ static struct pad_desc mx51babbage_pads[] = {
> MX51_PAD_EIM_D26__UART3_TXD,
> MX51_PAD_EIM_D27__UART3_RTS,
> MX51_PAD_EIM_D24__UART3_CTS,
> +
> + /* USB HOST1 */
> + MX51_PAD_GPIO_1_25__USBH1_CLK,
> + MX51_PAD_GPIO_1_26__USBH1_DIR,
> + MX51_PAD_GPIO_1_28__USBH1_NXT,
> + MX51_PAD_GPIO_1_11__USBH1_DATA0,
> + MX51_PAD_GPIO_1_12__USBH1_DATA1,
> + MX51_PAD_GPIO_1_13__USBH1_DATA2,
> + MX51_PAD_GPIO_1_14__USBH1_DATA3,
> + MX51_PAD_GPIO_1_15__USBH1_DATA4,
> + MX51_PAD_GPIO_1_16__USBH1_DATA5,
> + MX51_PAD_GPIO_1_17__USBH1_DATA6,
> + MX51_PAD_GPIO_1_18__USBH1_DATA7,
> +
> + /* USB HUB reset line*/
> + MX51_PAD_GPIO_1_7__GPIO1_7
How about "MX51_PAD_GPIO_1_7__GPIO_USB_RESET",
,
> };
>
> /* Serial ports */
> @@ -64,12 +83,31 @@ static inline void mxc_init_imx_uart(void)
> mxc_register_device(&mxc_uart_device1,&uart_pdata);
> mxc_register_device(&mxc_uart_device2,&uart_pdata);
> }
> -#else /* !SERIAL_IMX */
> +#else /* SERIAL_IMX */
> static inline void mxc_init_imx_uart(void)
> {
> }
> #endif /* SERIAL_IMX */
>
> +static inline void mx5_babbage_usbhub_reset(void)
> +{
> + int ret;
> +
> + /* Bring USB hub out of reset */
> + ret = gpio_request(GPIO_1_7, "GPIO1_7");
> + if (ret) {
> + printk("failed to get GPIO_1_7: %d\n", ret);
> + return;
> + }
> + gpio_direction_output(GPIO_1_7, 0);
> +
> + /* USB HUB RESET - De-assert USB HUB RESET_N */
> + msleep(1);
> + gpio_set_value(GPIO_1_7, 0);
> + msleep(1);
> + gpio_set_value(GPIO_1_7, 1);
> +}
> +
%s/GPIO_1_7/GPIO_USB_RESET/g
> /*
> * Board specific initialization.
> */
> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
> index 8f85f73..36684d0 100644
> --- a/arch/arm/mach-mx5/clock-mx51.c
> +++ b/arch/arm/mach-mx5/clock-mx51.c
> @@ -765,6 +765,10 @@ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
> DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
> NULL, NULL,&ipg_clk, NULL);
>
> +/* USB */
> +DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
> + NULL, NULL,&pll3_sw_clk, NULL);
> +
It should be
+ NULL, NULL, &pll3_sw_clk, NULL);
I'm a little bit picky here, but please use scripts/checkpatch.pl to fix this
coding style issue.
> #define _REGISTER_CLOCK(d, n, c) \
> { \
> .dev_id = d, \
> @@ -778,6 +782,10 @@ static struct clk_lookup lookups[] = {
> _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
> _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
> _REGISTER_CLOCK("fec.0", NULL, fec_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
> + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
> };
>
> static void clk_tree_init(void)
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index 73f2342..3d8f66a 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -11,6 +11,7 @@
> */
>
> #include<linux/platform_device.h>
> +#include<linux/dma-mapping.h>
> #include<mach/hardware.h>
> #include<mach/gpio.h>
> #include<mach/imx-uart.h>
> @@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
> .resource = mxc_fec_resources,
> };
>
> +static u64 usb_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct resource usbotg_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR,
> + .end = MX51_OTG_BASE_ADDR + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_OTG,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbdr_host_device = {
> + .name = "mxc-ehci",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(usbotg_resources),
> + .resource = usbotg_resources,
> + .dev = {
> + .dma_mask =&usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> +static struct resource usbh1_resources[] = {
> + {
> + .start = MX51_OTG_BASE_ADDR + 0x200,
> + .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_USB_H1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device mxc_usbh1_device = {
> + .name = "mxc-ehci",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(usbh1_resources),
> + .resource = usbh1_resources,
> + .dev = {
> + .dma_mask =&usb_dma_mask,
+ .dma_mask = &usb_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> struct mxc_gpio_port mxc_gpio_ports[] = {
> {
> .chip.label = "gpio-0",
> diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
> index f339ab8..95c45f9 100644
> --- a/arch/arm/mach-mx5/devices.h
> +++ b/arch/arm/mach-mx5/devices.h
> @@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
> extern struct platform_device mxc_uart_device1;
> extern struct platform_device mxc_uart_device2;
> extern struct platform_device mxc_fec_device;
> +extern struct platform_device mxc_usbdr_host_device;
> +extern struct platform_device mxc_usbh1_device;
--
Bryan Wu <bryan.wu at canonical.com>
Kernel Developer +86.138-1617-6545 Mobile
Ubuntu Kernel Team | Hardware Enablement Team
Canonical Ltd. www.canonical.com
Ubuntu - Linux for human beings | www.ubuntu.com
More information about the linux-arm-kernel
mailing list