s3c24xx gpiolib question

[Vasily Khoruzhick]

Hi,

Is following patch sufficient to add GPJ port support to s3c24xx gpiolib?
And how to switch gpioline to custom function mode (for example TOUT0 on GPB0) 
via gpiolib?

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961..65d79f9 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -151,7 +151,8 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
-	}, {
+	}, 
+	[7] = {
 		.base	= S3C2410_GPHCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
@@ -161,6 +162,16 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.ngpio			= 11,
 		},
 	},
+	[8] = {
+		.base	= S3C2440_GPJCON,
+		.pm = __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2440_GPJ0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOJ",
+			.ngpio			= 16,
+		},
+	},
 };
 
 static __init int s3c24xx_gpiolib_init(void)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20090927/2dd0962b/attachment.sig>