[PATCH] ep93xx: add remaining phys offset selections and update micro9
H Hartley Sweeten
hartleys at visionengravers.com
Tue Sep 22 12:57:09 EDT 2009
This adds the missing Kconfig options for the first SDRAM bank address
on ep93xx boards. The Micro9-Mid and Micro9-Slim boards need this to
create valid images which boot from 0xf0000000.
The Micro9 information has also been updated at the request of the
maintainer.
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ryan Mallon <ryan at bluewatersys.com>
Cc: Hubert Feurstein <hubert.feurstein at contec.at>
---
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c6..9167c3d 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0x00000000
+ first SDRAM bank at 0x00000000.
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xc0000000
+ first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+ bool "0xd0000000 - SDCE1"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+ bool "0xe0000000 - SDCE2"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ bool "0xf0000000 - SDCE3/AsyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xf0000000.
endchoice
@@ -112,28 +130,36 @@ config MACH_MICRO9
bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
+ bool "Support Contec Micro9-High"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ Contec Micro9-High board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "Support Contec Micro9-Mid"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ Contec Micro9-Mid board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
+ bool "Support Contec Micro9-Lite"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+ bool "Support Contec Micro9-Slim"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Slim board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a..0ad33f1 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12e..554064e 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
#define PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
More information about the linux-arm-kernel
mailing list