[PATCH 1/4] [INPUT][KEYBOARD] Samsung keypad driver support
Kyungmin Park
kmpark at infradead.org
Wed Sep 9 07:21:49 EDT 2009
Hi,
Simple typo at CONFIG_PM parameters. see below
Thank you,
Kyungmin Park
On Wed, Sep 9, 2009 at 8:11 PM, <jsgood.yang at samsung.com> wrote:
> From: Jinsung Yang <jsgood.yang at samsung.com>
>
> Add support for Samsung matrix keypad driver
>
> Signed-off-by: Jinsung Yang <jsgood.yang at samsung.com>
> Signed-off-by: Kyeongil Kim <ki0351.kim at samsung.com>
> ---
> drivers/input/keyboard/Kconfig | 6 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/s3c-keypad.c | 446 +++++++++++++++++++++++++++++++++++
> 3 files changed, 453 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/keyboard/s3c-keypad.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index a6b989a..4a04553 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -361,4 +361,10 @@ config KEYBOARD_XTKBD
> To compile this driver as a module, choose M here: the
> module will be called xtkbd.
>
> +config KEYBOARD_S3C
> + tristate "Samsung S3C keypad support"
> + depends on PLAT_S3C
> + help
> + Enable support for Samsung S3C keypad interface.
> +
> endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index b5b5eae..21331b8 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -31,3 +31,4 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
> obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
> obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
> obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
> +obj-$(CONFIG_KEYBOARD_S3C) += s3c-keypad.o
> diff --git a/drivers/input/keyboard/s3c-keypad.c b/drivers/input/keyboard/s3c-keypad.c
> new file mode 100644
> index 0000000..9436a4c
> --- /dev/null
> +++ b/drivers/input/keyboard/s3c-keypad.c
> @@ -0,0 +1,446 @@
> +/*
> + * linux/drivers/input/keyboard/s3c-keypad.c
> + *
> + * Copyright (C) 2009 Samsung Electronics
> + *
> + * Author: Jinsung Yang <jsgood.yang at samsung.com>
> + * Author: Kyeongil Kim <ki0351.kim at samsung.com>
> + *
> + * Driver for Samsung SoC matrix keypad controller.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/input.h>
> +#include <linux/platform_device.h>
> +#include <linux/miscdevice.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +
> +#include <mach/hardware.h>
> +#include <asm/irq.h>
> +
> +#include <plat/keypad.h>
> +#include <plat/regs-keypad.h>
> +
> +#undef DEBUG
> +
> +#define S3C_KEYPAD_MAX_ROWS 16
> +#define S3C_KEYPAD_MAX_COLS 8
> +
> +struct s3c_keypad {
> + struct s3c_platform_keypad *pdata;
> + unsigned short keycodes[S3C_KEYPAD_MAX_ROWS * S3C_KEYPAD_MAX_COLS];
> + struct input_dev *dev;
> + struct timer_list timer;
> + void __iomem *regs;
> + struct clk *clk;
> + int irq;
> + unsigned int prevmask_low;
> + unsigned int prevmask_high;
> + unsigned int keyifcon;
> + unsigned int keyiffc;
> +};
> +
> +static int s3c_keypad_scan(struct s3c_keypad *keypad, u32 *keymask_low,
> + u32 *keymask_high)
> +{
> + struct s3c_platform_keypad *pdata = keypad->pdata;
> + int i, j = 0;
> + u32 cval, rval, cfg;
> +
> + for (i = 0; i < pdata->nr_cols; i++) {
> + cval = readl(keypad->regs + S3C_KEYIFCOL);
> + cval |= S3C_KEYIF_COL_DMASK;
> + cval &= ~(1 << i);
> + writel(cval, keypad->regs + S3C_KEYIFCOL);
> + udelay(pdata->delay);
> +
> + rval = ~(readl(keypad->regs + S3C_KEYIFROW)) &
> + S3C_KEYIF_ROW_DMASK;
> +
> + if ((i * pdata->nr_rows) < pdata->max_masks)
> + *keymask_low |= (rval << (i * pdata->nr_rows));
> + else {
> + *keymask_high |= (rval << (j * pdata->nr_rows));
> + j++;
> + }
> + }
> +
> + cfg = readl(keypad->regs + S3C_KEYIFCOL);
> + cfg &= ~S3C_KEYIF_COL_MASK_ALL;
> + writel(cfg, keypad->regs + S3C_KEYIFCOL);
> +
> + return 0;
> +}
> +
> +static void s3c_keypad_timer_handler(unsigned long data)
> +{
> + struct s3c_keypad *keypad = (struct s3c_keypad *)data;
> + struct s3c_platform_keypad *pdata = keypad->pdata;
> + struct input_dev *input = keypad->dev;
> + u32 keymask_low = 0, keymask_high = 0;
> + u32 press_mask_low, press_mask_high;
> + u32 release_mask_low, release_mask_high, code, cfg;
> + int i;
> +
> + s3c_keypad_scan(keypad, &keymask_low, &keymask_high);
> +
> + if (keymask_low != keypad->prevmask_low) {
> + press_mask_low = ((keymask_low ^ keypad->prevmask_low) &
> + keymask_low);
> + release_mask_low = ((keymask_low ^ keypad->prevmask_low) &
> + keypad->prevmask_low);
> +
> + i = 0;
> + while (press_mask_low) {
> + if (press_mask_low & 1) {
> + code = keypad->keycodes[i];
> + input_report_key(input, code, 1);
> + dev_dbg(&input->dev, "low pressed: %d\n", i);
> + }
> + press_mask_low >>= 1;
> + i++;
> + }
> +
> + i = 0;
> + while (release_mask_low) {
> + if (release_mask_low & 1) {
> + code = keypad->keycodes[i];
> + input_report_key(input, code, 0);
> + dev_dbg(&input->dev, "low released: %d\n", i);
> + }
> + release_mask_low >>= 1;
> + i++;
> + }
> + keypad->prevmask_low = keymask_low;
> + }
> +
> + if (keymask_high != keypad->prevmask_high) {
> + press_mask_high = ((keymask_high ^ keypad->prevmask_high) &
> + keymask_high);
> + release_mask_high = ((keymask_high ^ keypad->prevmask_high) &
> + keypad->prevmask_high);
> +
> + i = 0;
> + while (press_mask_high) {
> + if (press_mask_high & 1) {
> + code = keypad->keycodes[i + pdata->max_masks];
> + input_report_key(input, code, 1);
> + dev_dbg(&input->dev, "high pressed: %d %d\n",
> + keypad->keycodes[i + pdata->max_masks],
> + i);
> + }
> + press_mask_high >>= 1;
> + i++;
> + }
> +
> + i = 0;
> + while (release_mask_high) {
> + if (release_mask_high & 1) {
> + code = keypad->keycodes[i + pdata->max_masks];
> + input_report_key(input, code, 0);
> + dev_dbg(&input->dev, "high released: %d\n",
> + keypad->keycodes[i + pdata->max_masks]);
> + }
> + release_mask_high >>= 1;
> + i++;
> + }
> + keypad->prevmask_high = keymask_high;
> + }
> +
> + if (keymask_low | keymask_high) {
> + mod_timer(&keypad->timer, jiffies + HZ / 10);
> + } else {
> + cfg = readl(keypad->regs + S3C_KEYIFCON);
> + cfg &= ~S3C_KEYIF_CON_MASK_ALL;
> + cfg |= (S3C_KEYIF_INT_F_EN | S3C_KEYIF_INT_R_EN |
> + S3C_KEYIF_DF_EN | S3C_KEYIF_FC_EN);
> + writel(cfg, keypad->regs + S3C_KEYIFCON);
> + }
> +}
> +
> +static irqreturn_t s3c_keypad_irq(int irq, void *dev_id)
> +{
> + struct s3c_keypad *keypad = dev_id;
> + u32 cfg;
> +
> + /* disable keypad interrupt and schedule for keypad timer handler */
> + cfg = readl(keypad->regs + S3C_KEYIFCON);
> + cfg &= ~(S3C_KEYIF_INT_F_EN | S3C_KEYIF_INT_R_EN);
> + writel(cfg, keypad->regs + S3C_KEYIFCON);
> +
> + keypad->timer.expires = jiffies + (HZ / 100);
> + mod_timer(&keypad->timer, keypad->timer.expires);
> +
> + /* clear the keypad interrupt status */
> + writel(S3C_KEYIF_STSCLR_CLEAR, keypad->regs + S3C_KEYIFSTSCLR);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int s3c_keypad_open(struct input_dev *dev)
> +{
> + struct s3c_keypad *keypad = input_get_drvdata(dev);
> + u32 cfg;
> +
> + clk_enable(keypad->clk);
> +
> + /* init keypad h/w block */
> + cfg = readl(keypad->regs + S3C_KEYIFCON);
> + cfg &= ~S3C_KEYIF_CON_MASK_ALL;
> + cfg |= (S3C_KEYIF_INT_F_EN | S3C_KEYIF_INT_R_EN |
> + S3C_KEYIF_DF_EN | S3C_KEYIF_FC_EN);
> + writel(cfg, keypad->regs + S3C_KEYIFCON);
> +
> + cfg = readl(keypad->regs + S3C_KEYIFFC);
> + cfg |= S3C_KEYIF_FILTER_VAL;
> + writel(cfg, keypad->regs + S3C_KEYIFFC);
> +
> + cfg = readl(keypad->regs + S3C_KEYIFCOL);
> + cfg &= ~S3C_KEYIF_COL_MASK_ALL;
> + writel(cfg, keypad->regs + S3C_KEYIFCOL);
> +
> + return 0;
> +}
> +
> +static void s3c_keypad_close(struct input_dev *dev)
> +{
> + struct s3c_keypad *keypad = input_get_drvdata(dev);
> +
> + clk_disable(keypad->clk);
> +}
> +
> +static int __devinit s3c_keypad_probe(struct platform_device *pdev)
> +{
> + struct s3c_platform_keypad *pdata;
> + struct s3c_keypad *keypad;
> + struct input_dev *input;
> + struct resource *res;
> + int error = 0, irq, i;
> +
> + pdata = pdev->dev.platform_data;
> + if (pdata == NULL) {
> + dev_err(&pdev->dev, "no platform data\n");
> + return -EINVAL;
> + }
> +
> + keypad = kzalloc(sizeof(struct s3c_keypad), GFP_KERNEL);
> + if (keypad == NULL) {
> + dev_err(&pdev->dev, "failed to allocate driver data\n");
> + return -ENOMEM;
> + }
> +
> + keypad->pdata = pdata;
> + if (!pdata->keymap) {
> + dev_err(&pdev->dev, "failed to get keymap array\n");
> + goto err_keymap;
> + }
> +
> + memcpy(keypad->keycodes, pdata->keymap,
> + sizeof(pdata->keymap[0]) * pdata->max_keys);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (res == NULL) {
> + dev_err(&pdev->dev, "failed to get I/O memory\n");
> + error = -ENXIO;
> + goto err_keymap;
> + }
> +
> + res = request_mem_region(res->start, resource_size(res), pdev->name);
> + if (res == NULL) {
> + dev_err(&pdev->dev, "failed to request I/O memory\n");
> + error = -EBUSY;
> + goto err_keymap;
> + }
> +
> + keypad->regs = ioremap(res->start, resource_size(res));
> + if (keypad->regs == NULL) {
> + dev_err(&pdev->dev, "failed to remap I/O memory\n");
> + error = -ENXIO;
> + goto err_map_io;
> + }
> +
> + keypad->clk = clk_get(&pdev->dev, "keypad");
> + if (IS_ERR(keypad->clk)) {
> + dev_err(&pdev->dev, "failed to get keypad clock\n");
> + error = PTR_ERR(keypad->clk);
> + goto err_clk;
> + }
> +
> + /* Create and register the input driver. */
> + input = input_allocate_device();
> + if (!input) {
> + dev_err(&pdev->dev, "failed to allocate input device\n");
> + error = -ENOMEM;
> + goto err_alloc_input;
> + }
> +
> + input->name = pdev->name;
> + input->id.bustype = BUS_HOST;
> + input->open = s3c_keypad_open;
> + input->close = s3c_keypad_close;
> + input->dev.parent = &pdev->dev;
> + input->keycode = keypad->keycodes;
> + input->keycodesize = sizeof(keypad->keycodes[0]);
> + input->keycodemax = ARRAY_SIZE(keypad->keycodes);
> +
> + keypad->dev = input;
> + input_set_drvdata(input, keypad);
> +
> + __set_bit(EV_KEY, input->evbit);
> + __set_bit(EV_REP, input->evbit);
> +
> + for (i = 0; i < pdata->max_keys; i++)
> + __set_bit(keypad->keycodes[i] & KEY_MAX, input->keybit);
> +
> + __clear_bit(KEY_RESERVED, input->keybit);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "failed to get keypad irq\n");
> + error = -ENXIO;
> + goto err_get_irq;
> + }
> +
> + platform_set_drvdata(pdev, keypad);
> +
> + error = request_irq(irq, s3c_keypad_irq, IRQF_DISABLED,
> + pdev->name, keypad);
> + if (error) {
> + dev_err(&pdev->dev, "failed to request IRQ\n");
> + goto err_req_irq;
> + }
> +
> + keypad->irq = irq;
> + setup_timer(&keypad->timer, s3c_keypad_timer_handler,
> + (unsigned long)keypad);
> +
> + /* Register the input device */
> + error = input_register_device(input);
> + if (error) {
> + dev_err(&pdev->dev, "failed to register input device\n");
> + goto err_reg_input;
> + }
> +
> + device_init_wakeup(&pdev->dev, 1);
> + dev_info(&pdev->dev, "Samsung Keypad Interface driver loaded\n");
> +
> + return 0;
> +
> +err_reg_input:
> + free_irq(irq, pdev);
> +
> +err_req_irq:
> + platform_set_drvdata(pdev, NULL);
> +
> +err_get_irq:
> + input_free_device(input);
> +
> +err_alloc_input:
> + clk_put(keypad->clk);
> +
> +err_clk:
> + iounmap(keypad->regs);
> +
> +err_map_io:
> + release_mem_region(res->start, resource_size(res));
> +
> +err_keymap:
> + kfree(keypad);
> +
> + return error;
> +}
> +
> +static int __devexit s3c_keypad_remove(struct platform_device *pdev)
> +{
> + struct s3c_keypad *keypad = platform_get_drvdata(pdev);
> + struct resource *res;
> +
> + free_irq(keypad->irq, pdev);
> + clk_put(keypad->clk);
> +
> + input_unregister_device(keypad->dev);
> + iounmap(keypad->regs);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + release_mem_region(res->start, resource_size(res));
> +
> + platform_set_drvdata(pdev, NULL);
> + kfree(keypad);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int s3c_keypad_suspend(struct platform_device *dev, pm_message_t state)
> +{
> + struct s3c_keypad *keypad = platform_get_drvdata(pdev);
> +
> + keypad->keyifcon = readl(keypad->regs + S3C_KEYIFCON);
> + keypad->keyiffc = readl(keypad->regs + S3C_KEYIFFC);
> +
> + disable_irq(IRQ_KEYPAD);
> + clk_disable(keypad->clk);
> +
> + return 0;
> +}
> +
> +static int s3c_keypad_resume(struct platform_device *dev)
> +{
> + struct s3c_keypad *keypad = platform_get_drvdata(pdev);
Where's pdev? maybe you should use 'pdev' instead of 'dev' at parameter.
> +
> + clk_enable(keypad->clock);
> +
> + writel(keypad->keyifcon, keypad->regs + S3C_KEYIFCON);
> + writel(keypad->keyiffc, keypad->regs + S3C_KEYIFFC);
> +
> + enable_irq(IRQ_KEYPAD);
> +
> + return 0;
> +}
> +#else
> +#define s3c_keypad_suspend NULL
> +#define s3c_keypad_resume NULL
> +#endif /* CONFIG_PM */
> +
> +static struct dev_pm_ops s3c_keypad_dev_pm_ops = {
> + .suspend = s3c_keypad_suspend,
> + .resume = s3c_keypad_resume,
> +};
> +
> +static struct platform_driver s3c_keypad_driver = {
> + .probe = s3c_keypad_probe,
> + .remove = s3c_keypad_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "s3c-keypad",
> + .pm = &s3c_keypad_dev_pm_ops,
> + },
> +};
> +
> +static int __init s3c_keypad_init(void)
> +{
> + return platform_driver_register(&s3c_keypad_driver);
> +}
> +
> +static void __exit s3c_keypad_exit(void)
> +{
> + platform_driver_unregister(&s3c_keypad_driver);
> +}
> +
> +module_init(s3c_keypad_init);
> +module_exit(s3c_keypad_exit);
> +
> +MODULE_AUTHOR("Kyeongil, Kim <ki0351.kim at samsung.com>");
> +MODULE_AUTHOR("Jinsung, Yang <jsgood.yang at samsung.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Keypad Interface Driver for Samsung SoC");
> +
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list