[PATCH] Add RGB555X and RGB565X formats to pxa-camera
Marek Vasut
marek.vasut at gmail.com
Mon Sep 7 04:50:11 EDT 2009
Dne Po 7. září 2009 08:22:22 Guennadi Liakhovetski napsal(a):
> On Mon, 7 Sep 2009, Marek Vasut wrote:
> > Dne Ne 6. záÅà 2009 20:15:17 Guennadi Liakhovetski napsal(a):
> > > On Sun, 6 Sep 2009, Marek Vasut wrote:
> > > > Dne Ne 6. záÅà 2009 18:52:55 Guennadi Liakhovetski napsal(a):
> > > > > On Sun, 6 Sep 2009, Marek Vasut wrote:
> > > > > > Ah damn, I see what you mean. What the camera does is it swaps
> > > > > > the RED and BLUE channel:
> > > > > > 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
> > > > > > B4 B3 B2 B1 B0 G4 G3 G2 G1 G1 R4 R3 R2 R1 R1 --
> > > > > > so it's more a BGR555/565 then. I had to patch fswebcam for this.
> > > > >
> > > > > Ok, this is, of course, something different. In this case you,
> > > > > probably, could deceive the PXA to handle blue as red and the other
> > > > > way round, but still, I would prefer not to do that. Hence my
> > > > > suggestion remains - pass these formats as raw data.
> > > >
> > > > Which is bogus from the camera point of view.
> > >
> > > Not at all. This just means: the subdevice provides a pixel format,
> > > that the bridge (PXA) knows nothing specific about, but it can just
> > > pass it one-to-one (as raw data) to the user - don't see anything bogus
> > > in this. Different bridges have support for different pixel colour
> > > formats, but, I think, all bridges can pass data as raw (pass-through).
> > > Some bridges can _only_ do this, so, this is actually the default
> > > video-capture mode.
> >
> > But then you'll have to tell your software how to process the raw data
> > (in what format they are). If there was this RGB565X passthrough support,
> > the software could at least check if you are not forcing it to process
> > nonsense.
>
> There's no difference for user-space software. It requests BGR555 it gets
> BGR555 back, because that's the information the pxa driver will find in
> this format descriptor: if you take this data and put it in RAM in a
> certain way, you get BGR555.
How's it supposed to get BGR555 if the pxa-camera doesnt support that ? Will the
v4l2 layer convert it or something ?
>
> Thanks
> Guennadi
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
More information about the linux-arm-kernel
mailing list