[PATCH 2/5] Treo680: remove unused LCD power GPIO

[Eric Miao]

Tomáš 'Sleep_Walker' Čech wrote:
> Hi,
> 
> Dne Po 31. srpna 2009 19:34:51 Marek Vasut napsal(a):
>> Dne Po 31. srpna 2009 19:25:58 Tomáš Čech napsal(a):
>>> From: Tomáš Čech <sleep walker at suse.cz>
>>>
>>>
>>> Signed-off-by: Tomáš Čech <sleep_walker at suse.cz>
>>> ---
>>>  arch/arm/mach-pxa/treo680.c |   10 +---------
>>>  1 files changed, 1 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
>>> index 050ad8e..57bccc3 100644
>>> --- a/arch/arm/mach-pxa/treo680.c
>>> +++ b/arch/arm/mach-pxa/treo680.c
>>> @@ -254,16 +254,9 @@ static int treo680_backlight_init(struct device *dev)
>>>  	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
>>>  	if (ret)
>>>  		goto err2;
>>> -	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
>>> -	if (ret)
>>> -		goto err2;
>>> -	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
>>> -	if (ret)
>>> -		goto err3;
>>>
>>>  	return 0;
>>> -err3:
>>> -	gpio_free(GPIO_NR_TREO680_LCD_POWER);
>>> +
>>>  err2:
>>>  	gpio_free(GPIO_NR_TREO680_BL_POWER);
>>>  err:
>>> @@ -279,7 +272,6 @@ static int treo680_backlight_notify(int brightness)
>>>  static void treo680_backlight_exit(struct device *dev)
>>>  {
>>>  	gpio_free(GPIO_NR_TREO680_BL_POWER);
>>> -	gpio_free(GPIO_NR_TREO680_LCD_POWER);
>>>  }
>>>
>>>  static struct platform_pwm_backlight_data treo680_backlight_data = {
>> Why was that GPIO there before then? Does this have any effect on the boot 
>> problems you are experiencing with Centro/T680? Otherwise seems OK to me
> 
> I used it first in brightness setting for 0 value. I found it not good idea. I removed it from function, but I wanted to keep GPIO registered and direction set. But it can work well even without that and I'd like to add some function to export some control GPIOs through /sys/class/gpio interface (bluetooth power, GSM power, GSM reset...) - this GPIO will be also exported there...
> 

The name sounds like a GPIO for the power of the LCD panel itself,
does it make sense to have this somewhere in the LCD power_{on,off}
hooks?