[PATCH 09/20] SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
Dmitry Artamonow
mad_soft at inbox.ru
Sat Oct 24 16:12:09 EDT 2009
Use of gpio_request/gpio_free in some callbacks may look ugly, but
corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet)
init/exit hooks and registering these gpios in *_mach_init is also
not possible, because htc-gpio driver starts a bit later...
Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
---
arch/arm/mach-sa1100/h3600.c | 87 ++++++++++++++++++++++++++++++++++++++---
drivers/pcmcia/sa1100_h3600.c | 57 +++++++++++++++++++++------
2 files changed, 126 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 429fdb0..5e6011c 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -111,12 +111,32 @@ static struct mtd_partition h3xxx_partitions[] = {
static void h3xxx_set_vpp(int vpp)
{
- assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
+ gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+ int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+ if (err)
+ return err;
+
+ err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+ if (err)
+ gpio_free(H3XXX_EGPIO_VPP_ON);
+
+ return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+ gpio_free(H3XXX_EGPIO_VPP_ON);
}
static struct flash_platform_data h3xxx_flash_data = {
.map_name = "cfi_probe",
.set_vpp = h3xxx_set_vpp,
+ .init = h3xxx_flash_init,
+ .exit = h3xxx_flash_exit,
.parts = h3xxx_partitions,
.nr_parts = ARRAY_SIZE(h3xxx_partitions),
};
@@ -158,7 +178,10 @@ static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser3UTCR0)
- assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
+ if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+ gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+ gpio_free(H3XXX_EGPIO_RS232_ON);
+ }
}
/*
@@ -362,7 +385,11 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
*/
static void h3100_lcd_power(int enable)
{
- assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+ if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+ gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+ gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+ gpio_free(H3XXX_EGPIO_LCD_ON);
+ }
}
@@ -412,6 +439,7 @@ static struct gpio_default_state h3100_default_gpio[] = {
{ H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" },
{ H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" },
{ H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" },
+ { H3100_GPIO_LCD_3V_ON, GPIO_MODE_OUT0, "LCD 3v" },
};
static void __init h3100_mach_init(void)
@@ -506,7 +534,25 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
*/
static void h3600_lcd_power(int enable)
{
- assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+ if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power"))
+ goto err1;
+ if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control"))
+ goto err2;
+ if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v"))
+ goto err3;
+ if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v"))
+ goto err4;
+
+ gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+ gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+ gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+ gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
+
+ gpio_free(H3600_EGPIO_LVDD_ON);
+err4: gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3: gpio_free(H3600_EGPIO_LCD_PCI);
+err2: gpio_free(H3XXX_EGPIO_LCD_ON);
+err1: return;
}
static void __init h3600_map_io(void)
@@ -531,18 +577,47 @@ static void __init h3600_map_io(void)
*/
static int h3600_irda_set_power(struct device *dev, unsigned int state)
{
- assign_h3600_egpio(IPAQ_EGPIO_IR_ON, state);
+ gpio_set_value(H3600_EGPIO_IR_ON, state);
return 0;
}
static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
{
- assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
+ gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static int h3600_irda_startup(struct device *dev)
+{
+ int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+ if (err)
+ goto err1;
+ err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+ if (err)
+ goto err2;
+ err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+ if (err)
+ goto err2;
+ err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+ if (err)
+ goto err3;
+ return 0;
+
+err3: gpio_free(H3600_EGPIO_IR_FSEL);
+err2: gpio_free(H3600_EGPIO_IR_ON);
+err1: return err;
+}
+
+static void h3600_irda_shutdown(struct device *dev)
+{
+ gpio_free(H3600_EGPIO_IR_ON);
+ gpio_free(H3600_EGPIO_IR_FSEL);
}
static struct irda_platform_data h3600_irda_data = {
.set_power = h3600_irda_set_power,
.set_speed = h3600_irda_set_speed,
+ .startup = h3600_irda_startup,
+ .shutdown = h3600_irda_shutdown,
};
static struct gpio_default_state h3600_default_gpio[] = {
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 6d92a49..4afd348 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -47,9 +47,33 @@ static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
goto err02;
irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0);
- err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
if (err)
goto err02;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ if (err)
+ goto err03;
+ err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
+ if (err)
+ goto err03;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
+ if (err)
+ goto err04;
+ err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
+ if (err)
+ goto err04;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
+ if (err)
+ goto err05;
+ err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
+ if (err)
+ goto err05;
+ err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
+ if (err)
+ goto err06;
+ err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (err)
+ goto err06;
break;
case 1:
err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1");
@@ -75,6 +99,10 @@ static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
}
return 0;
+err06: gpio_free(H3XXX_EGPIO_CARD_RESET);
+err05: gpio_free(H3XXX_EGPIO_OPT_RESET);
+err04: gpio_free(H3XXX_EGPIO_OPT_ON);
+err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
err02: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
err00: return err;
@@ -88,12 +116,17 @@ static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
- /* Disable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
switch (skt->nr) {
case 0:
+ /* Disable CF bus: */
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
+
+ gpio_free(H3XXX_EGPIO_CARD_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_ON);
+ gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
gpio_free(H3XXX_GPIO_PCMCIA_CD0);
gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
break;
@@ -139,7 +172,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
return -1;
}
- assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
+ gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
@@ -149,9 +182,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
msleep(10);
@@ -169,10 +202,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
}
}
--
1.6.5.1.63.ga9d7.dirty
More information about the linux-arm-kernel
mailing list