[PATCH v2 00/32] OMAP3: PM: base off-mode support

[Kevin Hilman]

This series adds the base off-mode support to the OMAP3 PM core.
The code originates from the OMAP PM branch[1] and has been tested
broadly on a variety of OMAP3 platforms.

It is currently based on Tony's for-next branch since it depends
on the IO address space rework series and the omap-headers rework

This series is also available in the branch 'pm-upstream/pm-off' in
my linux-omap-pm git repo at
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git

Differences from v1
- Added descriptive changelogs to all patches
- Incorporated a handful of smaller off-mode fixups from PM branch

Kevin

Aaro Koskinen (2):
  OMAP: PM: Clear DMA channel state after a wakeup
  OMAP3: PM: Fix INTC context save/restore

Jouni Hogander (1):
  OMAP3: PM: Save and restore also CM_CLKSEL1_PLL_IVA2

Juha Yrjola (1):
  OMAP: Store reboot mode in scratchpad on OMAP34xx

Kalle Jokiniemi (5):
  OMAP3: PM: Fix secure SRAM context save/restore
  ARM: OMAP: SMS: save/restore of SMS_SYSCONFIG for off-mode
  OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpad
  PM: Disable usb host HW save and restore
  OMAP3: PM: Enable IO-CHAIN wakeup

Kevin Hilman (3):
  OMAP3: PM debug: allow runtime toggle of PM features
  PM debug: allow configurable wakeup from suspend on OMAP GPtimer
  OMAP3: PM: decouple PER and CORE context save and restore

Peter 'p2' De Schrijver (1):
  OMAP3: PM: Wait for SDRC ready iso a blind delay

Rajendra Nayak (12):
  OMAP3: PM: GPMC context save/restore
  OMAP3: PM: GPIO context save/restore
  OMAP3: PM: INTC context save/restore
  OMAP3: PM: PRCM context save/restore
  OMAP3: PM: Populate scratchpad contents
  OMAP3: PM: SCM context save/restore
  OMAP3: PM: restore SRAM functions after off-mode.
  OMAP3: PM: handle PER/NEON/CORE in idle
  OMAP3: PM: Restore MMU table entry
  OMAP3: PM: MPU off-mode support
  OMAP3: PM: CORE domain off-mode support
  OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT

Tero Kristo (7):
  OMAP: PM: DMA context save/restore for off-mode support
  OMAP3 PM: off-mode support for HS/EMU devices
  OMAP3: PM: save secure RAM only during init
  OMAP3: PM: Enable SDRAM auto-refresh during sleep
  OMAP3: PM: SDRC auto-refresh workaround for off-mode
  OMAP3: PM: Prevent PER from going OFF when CORE is going INA
  OMAP3: PM: MPU and CORE should stay awake if there is CAM domain
    ACTIVE

 arch/arm/mach-omap2/control.c             |  381 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/gpmc.c                |   98 +++++++-
 arch/arm/mach-omap2/irq.c                 |   66 +++++
 arch/arm/mach-omap2/pm-debug.c            |   29 ++
 arch/arm/mach-omap2/pm.h                  |   10 +
 arch/arm/mach-omap2/pm34xx.c              |  362 +++++++++++++++++++++++++-
 arch/arm/mach-omap2/powerdomains34xx.h    |    8 +-
 arch/arm/mach-omap2/prcm.c                |  407 ++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/prm-regbits-34xx.h    |    2 +
 arch/arm/mach-omap2/sdrc.c                |   27 ++
 arch/arm/mach-omap2/serial.c              |    2 -
 arch/arm/mach-omap2/sleep34xx.S           |  218 ++++++++++++++--
 arch/arm/mach-omap2/timer-gp.c            |    2 +
 arch/arm/plat-omap/dma.c                  |   62 +++++-
 arch/arm/plat-omap/gpio.c                 |   92 +++++++
 arch/arm/plat-omap/include/plat/control.h |   61 +++++-
 arch/arm/plat-omap/include/plat/dma.h     |    5 +
 arch/arm/plat-omap/include/plat/gpio.h    |    3 +-
 arch/arm/plat-omap/include/plat/gpmc.h    |    3 +
 arch/arm/plat-omap/include/plat/irqs.h    |    5 +
 arch/arm/plat-omap/include/plat/prcm.h    |    6 +-
 arch/arm/plat-omap/include/plat/sdrc.h    |    8 +
 arch/arm/plat-omap/include/plat/sram.h    |    7 +
 arch/arm/plat-omap/sram.c                 |    8 +-
 24 files changed, 1822 insertions(+), 50 deletions(-)
 mode change 100644 => 100755 arch/arm/plat-omap/include/plat/dma.h