[PATCH] ARM: NX3: do not reference mxc_iomux_v3_init() for !CONFIG_ARCH_MX35

[Fabio Estevam]

--- On Wed, 10/21/09, Daniel Mack <daniel at caiaq.de> wrote:

> From: Daniel Mack <daniel at caiaq.de>
> Subject: [PATCH] ARM: NX3: do not reference mxc_iomux_v3_init() for !\

There is a typo on the Subject: NX3 should be MX3.

Regards,

Fabio Estevam