[PATCH] ARM:S3C2440: MINI2440 Remove some improper __initdata qualifiers
Shine Liu
shinel at foxmail.com
Tue Oct 20 23:33:04 EDT 2009
Hi,all
Since 2.6.31-rc7 released on Aug 22, someone used mini-2440 mach may
find that some device worked improperly and especailly when the machine
power off, some panic message showed up. After some debug work, I found
the bug is caused by the improper __initdata qualifier on some device
drivers. I visted the mini2440 webpage and found Michel Pollet had just
patched for the bug on that day[1].
[1]
http://repo.or.cz/w/linux-2.6/mini2440.git?a=commitdiff;h=e575112de40df34936dbeac1699efc270231a40e
The patch[1] given by Michel is not for the mainline but for his
development tree, so the patch can't be applied directly for the
mainline. Two months has gone, the bug still exsits in the mainline, so
I created a new patch based on 2.6.32-rc5. The patch has been tested on
my mini2440 board.
Best Regards,
Shine
Signed-off-by: Michel Pollet <buserror at gmail.com>
Signed-off-by: Shine Liu <liuxian at redflag-linux.com>
------------------------------------------------------
--- a/arch/arm/mach-s3c2440/mach-mini2440.c 2009-10-21 10:18:52.000000000 +0800
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c 2009-10-21 10:29:44.000000000 +0800
@@ -61,7 +61,7 @@
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-static struct map_desc mini2440_iodesc[] __initdata = {
+static struct map_desc mini2440_iodesc[] = {
/* nothing to declare, move along */
};
@@ -70,7 +70,7 @@
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg mini2440_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
@@ -114,7 +114,7 @@
}
}
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+static struct s3c2410_udc_mach_info mini2440_udc_cfg = {
.udc_command = mini2440_udc_pullup,
};
@@ -144,7 +144,7 @@
.type = (S3C2410_LCDCON1_TFT16BPP |\
S3C2410_LCDCON1_TFT)
-struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+struct s3c2410fb_display mini2440_lcd_cfg[] = {
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
@@ -191,7 +191,7 @@
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+struct s3c2410fb_mach_info mini2440_fb_info = {
.displays = &mini2440_lcd_cfg[0], /* not constant! see init */
.num_displays = 1,
.default_display = 0,
@@ -233,7 +233,7 @@
/* MMC/SD */
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg = {
.gpio_detect = S3C2410_GPG(8),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
@@ -242,7 +242,7 @@
/* NAND Flash on MINI2440 board */
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+static struct mtd_partition mini2440_default_nand_part[] = {
[0] = {
.name = "u-boot",
.size = SZ_256K,
@@ -267,7 +267,7 @@
},
};
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+static struct s3c2410_nand_set mini2440_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
@@ -277,7 +277,7 @@
},
};
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+static struct s3c2410_platform_nand mini2440_nand_info = {
.tacls = 0,
.twrph0 = 25,
.twrph1 = 15,
@@ -288,7 +288,7 @@
/* DM9000AEP 10/100 ethernet controller */
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@
* | | +----+ +----+
* .....
*/
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
@@ -384,12 +384,12 @@
#endif
};
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
@@ -399,41 +399,41 @@
/* LEDS */
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
@@ -441,7 +441,7 @@
},
};
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
@@ -449,7 +449,7 @@
},
};
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
@@ -457,7 +457,7 @@
},
};
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
@@ -465,7 +465,7 @@
},
};
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
@@ -475,14 +475,14 @@
/* AUDIO */
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
@@ -498,14 +498,14 @@
.page_size = 16,
};
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+static struct i2c_board_info mini2440_i2c_devs[] = {
{
I2C_BOARD_INFO("24c08", 0x50),
.platform_data = &at24c08,
},
};
-static struct platform_device *mini2440_devices[] __initdata = {
+static struct platform_device *mini2440_devices[] = {
&s3c_device_usb,
&s3c_device_wdt,
/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
More information about the linux-arm-kernel
mailing list