zaurus: cleanup sharpsl_pm.c

Eric Miao eric.y.miao at gmail.com
Tue Oct 20 11:59:40 EDT 2009


On Sun, Oct 18, 2009 at 12:36 AM, Pavel Machek <pavel at ucw.cz> wrote:
> On Tue 2009-10-06 22:03:39, Pavel Machek wrote:
>> This fixes checkpatch/style problems in sharpsl_pm.c, allowing me to
>> submit real fixes next. Move spitz-specific voltage table to
>> spitz-specific file.
>>
>> Signed-off-by: Pavel Machek <pavel at ucw.cz>
>
> Eric, any news on this one? I have real development going on top of
> this one, so it is quite important for me...

Sorry late on this. Applied.

>                                                                Pavel
>
>> --- linux-rc/arch/arm.ofic/mach-pxa/sharpsl.h 2009-09-10 00:13:59.000000000 +0200
>> +++ linux-rc/arch/arm/mach-pxa/sharpsl.h      2009-10-06 21:15:40.000000000 +0200
>> @@ -42,8 +42,6 @@
>>  #define MAX1111_BATT_TEMP   2u
>>  #define MAX1111_ACIN_VOLT   6u
>>
>> -extern struct battery_thresh spitz_battery_levels_acin[];
>> -extern struct battery_thresh spitz_battery_levels_noac[];
>>  int sharpsl_pm_pxa_read_max1111(int channel);
>>
>>
>> diff -ur linux-rc/arch/arm.ofic/mach-pxa/sharpsl_pm.c linux-rc/arch/arm/mach-pxa/sharpsl_pm.c
>> --- linux-rc/arch/arm.ofic/mach-pxa/sharpsl_pm.c      2009-10-06 13:48:07.000000000 +0200
>> +++ linux-rc/arch/arm/mach-pxa/sharpsl_pm.c   2009-10-06 21:15:40.000000000 +0200
>> @@ -78,106 +78,21 @@
>>
>>
>>
>> -struct battery_thresh spitz_battery_levels_acin[] = {
>> -     { 213, 100},
>> -     { 212,  98},
>> -     { 211,  95},
>> -     { 210,  93},
>> -     { 209,  90},
>> -     { 208,  88},
>> -     { 207,  85},
>> -     { 206,  83},
>> -     { 205,  80},
>> -     { 204,  78},
>> -     { 203,  75},
>> -     { 202,  73},
>> -     { 201,  70},
>> -     { 200,  68},
>> -     { 199,  65},
>> -     { 198,  63},
>> -     { 197,  60},
>> -     { 196,  58},
>> -     { 195,  55},
>> -     { 194,  53},
>> -     { 193,  50},
>> -     { 192,  48},
>> -     { 192,  45},
>> -     { 191,  43},
>> -     { 191,  40},
>> -     { 190,  38},
>> -     { 190,  35},
>> -     { 189,  33},
>> -     { 188,  30},
>> -     { 187,  28},
>> -     { 186,  25},
>> -     { 185,  23},
>> -     { 184,  20},
>> -     { 183,  18},
>> -     { 182,  15},
>> -     { 181,  13},
>> -     { 180,  10},
>> -     { 179,   8},
>> -     { 178,   5},
>> -     {   0,   0},
>> -};
>> -
>> -struct battery_thresh  spitz_battery_levels_noac[] = {
>> -     { 213, 100},
>> -     { 212,  98},
>> -     { 211,  95},
>> -     { 210,  93},
>> -     { 209,  90},
>> -     { 208,  88},
>> -     { 207,  85},
>> -     { 206,  83},
>> -     { 205,  80},
>> -     { 204,  78},
>> -     { 203,  75},
>> -     { 202,  73},
>> -     { 201,  70},
>> -     { 200,  68},
>> -     { 199,  65},
>> -     { 198,  63},
>> -     { 197,  60},
>> -     { 196,  58},
>> -     { 195,  55},
>> -     { 194,  53},
>> -     { 193,  50},
>> -     { 192,  48},
>> -     { 191,  45},
>> -     { 190,  43},
>> -     { 189,  40},
>> -     { 188,  38},
>> -     { 187,  35},
>> -     { 186,  33},
>> -     { 185,  30},
>> -     { 184,  28},
>> -     { 183,  25},
>> -     { 182,  23},
>> -     { 181,  20},
>> -     { 180,  18},
>> -     { 179,  15},
>> -     { 178,  13},
>> -     { 177,  10},
>> -     { 176,   8},
>> -     { 175,   5},
>> -     {   0,   0},
>> -};
>> -
>>  /* MAX1111 Commands */
>> -#define MAXCTRL_PD0      1u << 0
>> -#define MAXCTRL_PD1      1u << 1
>> -#define MAXCTRL_SGL      1u << 2
>> -#define MAXCTRL_UNI      1u << 3
>> +#define MAXCTRL_PD0      (1u << 0)
>> +#define MAXCTRL_PD1      (1u << 1)
>> +#define MAXCTRL_SGL      (1u << 2)
>> +#define MAXCTRL_UNI      (1u << 3)
>>  #define MAXCTRL_SEL_SH   4
>> -#define MAXCTRL_STR      1u << 7
>> +#define MAXCTRL_STR      (1u << 7)
>>
>>  /*
>>   * Read MAX1111 ADC
>>   */
>>  int sharpsl_pm_pxa_read_max1111(int channel)
>>  {
>> -     if (machine_is_tosa()) // Ugly, better move this function into another module
>> +     /* Ugly, better move this function into another module */
>> +     if (machine_is_tosa())
>>           return 0;
>>
>>  #ifdef CONFIG_CORGI_SSP_DEPRECATED
>> @@ -238,7 +153,7 @@
>>
>>  static void sharpsl_battery_thread(struct work_struct *private_)
>>  {
>> -     int voltage, percent, apm_status, i = 0;
>> +     int voltage, percent, apm_status, i;
>>
>>       if (!sharpsl_pm.machinfo)
>>               return;
>> @@ -250,15 +165,14 @@
>>                       && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
>>               schedule_delayed_work(&toggle_charger, 0);
>>
>> -     while(1) {
>> +     for (i = 0; i < 5; i++) {
>>               voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
>> -
>> -             if (voltage > 0) break;
>> -             if (i++ > 5) {
>> -                     voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
>> -                     dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
>> +             if (voltage > 0)
>>                       break;
>> -             }
>> +     }
>> +     if (voltage <= 0) {
>> +             voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
>> +             dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
>>       }
>>
>>       voltage = sharpsl_average_value(voltage);
>> @@ -266,8 +180,10 @@
>>       percent = get_percentage(voltage);
>>
>>       /* At low battery voltages, the voltage has a tendency to start
>> -           creeping back up so we try to avoid this here */
>> -     if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
>> +        creeping back up so we try to avoid this here */
>> +     if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
>> +         || (apm_status == APM_BATTERY_STATUS_HIGH)
>> +         || percent <= sharpsl_pm.battstat.mainbat_percent) {
>>               sharpsl_pm.battstat.mainbat_voltage = voltage;
>>               sharpsl_pm.battstat.mainbat_status = apm_status;
>>               sharpsl_pm.battstat.mainbat_percent = percent;
>> @@ -279,8 +195,8 @@
>>  #ifdef CONFIG_BACKLIGHT_CORGI
>>       /* If battery is low. limit backlight intensity to save power. */
>>       if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
>> -                     && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
>> -                     (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
>> +         && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
>> +         || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
>>               if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
>>                       sharpsl_pm.machinfo->backlight_limit(1);
>>                       sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
>> @@ -293,8 +209,8 @@
>>
>>       /* Suspend if critical battery level */
>>       if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
>> -                     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
>> -                     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
>> +          && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
>> +          && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
>>               sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
>>               dev_err(sharpsl_pm.dev, "Fatal Off\n");
>>               apm_queue_event(APM_CRITICAL_SUSPEND);
>> @@ -346,7 +264,7 @@
>>
>>  static void sharpsl_charge_toggle(struct work_struct *private_)
>>  {
>> -     dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
>> +     dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
>>
>>       if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
>>               sharpsl_charge_off();
>> @@ -368,7 +286,7 @@
>>  {
>>       int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
>>
>> -     dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
>> +     dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
>>
>>       sharpsl_average_clear();
>>       if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
>> @@ -472,14 +390,14 @@
>>       sharpsl_ad[sharpsl_ad_index] = ad;
>>       sharpsl_ad_index++;
>>       if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
>> -             for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
>> +             for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
>>                       sharpsl_ad[i] = sharpsl_ad[i+1];
>>               sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
>>       }
>> -     for (i=0; i < sharpsl_ad_index; i++)
>> +     for (i = 0; i < sharpsl_ad_index; i++)
>>               ad_val += sharpsl_ad[i];
>>
>> -     return (ad_val / sharpsl_ad_index);
>> +     return ad_val / sharpsl_ad_index;
>>  }
>>
>>  /*
>> @@ -492,8 +410,8 @@
>>
>>       /* Find MAX val */
>>       temp = val[0];
>> -     j=0;
>> -     for (i=1; i<5; i++) {
>> +     j = 0;
>> +     for (i = 1; i < 5; i++) {
>>               if (temp < val[i]) {
>>                       temp = val[i];
>>                       j = i;
>> @@ -502,21 +420,21 @@
>>
>>       /* Find MIN val */
>>       temp = val[4];
>> -     k=4;
>> -     for (i=3; i>=0; i--) {
>> +     k = 4;
>> +     for (i = 3; i >= 0; i--) {
>>               if (temp > val[i]) {
>>                       temp = val[i];
>>                       k = i;
>>               }
>>       }
>>
>> -     for (i=0; i<5; i++)
>> -             if (i != j && i != k )
>> +     for (i = 0; i < 5; i++)
>> +             if (i != j && i != k)
>>                       sum += val[i];
>>
>>       dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
>>
>> -     return (sum/3);
>> +     return sum/3;
>>  }
>>
>>  static int sharpsl_check_battery_temp(void)
>> @@ -524,7 +442,7 @@
>>       int val, i, buff[5];
>>
>>       /* Check battery temperature */
>> -     for (i=0; i<5; i++) {
>> +     for (i = 0; i < 5; i++) {
>>               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
>>               sharpsl_pm.machinfo->measure_temp(1);
>>               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
>> @@ -557,7 +477,7 @@
>>               sharpsl_pm.machinfo->discharge1(1);
>>
>>       /* Check battery voltage */
>> -     for (i=0; i<5; i++) {
>> +     for (i = 0; i < 5; i++) {
>>               buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
>>               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
>>       }
>> @@ -581,16 +501,16 @@
>>  {
>>       int temp, i, buff[5];
>>
>> -     for (i=0; i<5; i++) {
>> +     for (i = 0; i < 5; i++) {
>>               buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
>>               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
>>       }
>>
>>       temp = get_select_val(buff);
>> -     dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
>> +     dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
>>
>>       if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
>> -             dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
>> +             dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
>>               return -1;
>>       }
>>
>> @@ -624,9 +544,9 @@
>>
>>  static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
>>  {
>> -     dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
>> +     dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
>>
>> -     dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
>> +     dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
>>       /* not charging and AC-IN! */
>>
>>       if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
>> @@ -644,12 +564,12 @@
>>       if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
>>               RTSR &= RTSR_ALE;
>>               RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
>> -             dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
>> +             dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
>>               sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
>>       } else if (alarm_enable) {
>>               RTSR &= RTSR_ALE;
>>               RTAR = alarm_time;
>> -             dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
>> +             dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
>>       } else {
>>               dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
>>       }
>> @@ -658,19 +578,18 @@
>>
>>       sharpsl_pm.machinfo->postsuspend();
>>
>> -     dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
>> +     dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
>>  }
>>
>>  static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
>>  {
>> -     if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
>> -     {
>> +     if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
>>               if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
>>                       dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
>>                       corgi_goto_sleep(alarm_time, alarm_enable, state);
>>                       return 1;
>>               }
>> -             if(sharpsl_off_charge_battery()) {
>> +             if (sharpsl_off_charge_battery()) {
>>                       dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
>>                       corgi_goto_sleep(alarm_time, alarm_enable, state);
>>                       return 1;
>> @@ -697,7 +616,7 @@
>>
>>       corgi_goto_sleep(alarm_time, alarm_status, state);
>>
>> -     while (corgi_enter_suspend(alarm_time,alarm_status,state))
>> +     while (corgi_enter_suspend(alarm_time, alarm_status, state))
>>               {}
>>
>>       if (sharpsl_pm.machinfo->earlyresume)
>> @@ -732,7 +651,7 @@
>>               sharpsl_pm.machinfo->discharge1(1);
>>
>>       /* Check battery : check inserting battery ? */
>> -     for (i=0; i<5; i++) {
>> +     for (i = 0; i < 5; i++) {
>>               buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
>>               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
>>       }
>> @@ -812,7 +731,7 @@
>>               mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
>>
>>               time = RCNR;
>> -             while(1) {
>> +             while (1) {
>>                       /* Check if any wakeup event had occurred */
>>                       if (sharpsl_pm.machinfo->charger_wakeup() != 0)
>>                               return 0;
>> @@ -835,9 +754,9 @@
>>       mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
>>
>>       time = RCNR;
>> -     while(1) {
>> +     while (1) {
>>               /* Check if any wakeup event had occurred */
>> -             if (sharpsl_pm.machinfo->charger_wakeup() != 0)
>> +             if (sharpsl_pm.machinfo->charger_wakeup())
>>                       return 0;
>>               /* Check for timeout */
>>               if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
>> @@ -864,12 +783,12 @@
>>
>>  static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
>>  {
>> -     return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
>> +     return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
>>  }
>>
>>  static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
>>  {
>> -     return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
>> +     return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
>>  }
>>
>>  static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
>> @@ -943,8 +862,7 @@
>>               }
>>       }
>>
>> -     if (sharpsl_pm.machinfo->batfull_irq)
>> -     {
>> +     if (sharpsl_pm.machinfo->batfull_irq) {
>>               /* Register interrupt handler. */
>>               if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
>>                       dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
>> --- linux-rc/arch/arm.ofic/mach-pxa/spitz_pm.c        2009-09-10 00:13:59.000000000 +0200
>> +++ linux-rc/arch/arm/mach-pxa/spitz_pm.c     2009-10-06 21:15:40.000000000 +0200
>> @@ -37,6 +37,93 @@
>>
>>  static int spitz_last_ac_status;
>>
>> +static const struct battery_thresh spitz_battery_levels_acin[] = {
>> +     { 213, 100},
>> +     { 212,  98},
>> +     { 211,  95},
>> +     { 210,  93},
>> +     { 209,  90},
>> +     { 208,  88},
>> +     { 207,  85},
>> +     { 206,  83},
>> +     { 205,  80},
>> +     { 204,  78},
>> +     { 203,  75},
>> +     { 202,  73},
>> +     { 201,  70},
>> +     { 200,  68},
>> +     { 199,  65},
>> +     { 198,  63},
>> +     { 197,  60},
>> +     { 196,  58},
>> +     { 195,  55},
>> +     { 194,  53},
>> +     { 193,  50},
>> +     { 192,  48},
>> +     { 192,  45},
>> +     { 191,  43},
>> +     { 191,  40},
>> +     { 190,  38},
>> +     { 190,  35},
>> +     { 189,  33},
>> +     { 188,  30},
>> +     { 187,  28},
>> +     { 186,  25},
>> +     { 185,  23},
>> +     { 184,  20},
>> +     { 183,  18},
>> +     { 182,  15},
>> +     { 181,  13},
>> +     { 180,  10},
>> +     { 179,   8},
>> +     { 178,   5},
>> +     {   0,   0},
>> +};
>> +
>> +static const struct battery_thresh  spitz_battery_levels_noac[] = {
>> +     { 213, 100},
>> +     { 212,  98},
>> +     { 211,  95},
>> +     { 210,  93},
>> +     { 209,  90},
>> +     { 208,  88},
>> +     { 207,  85},
>> +     { 206,  83},
>> +     { 205,  80},
>> +     { 204,  78},
>> +     { 203,  75},
>> +     { 202,  73},
>> +     { 201,  70},
>> +     { 200,  68},
>> +     { 199,  65},
>> +     { 198,  63},
>> +     { 197,  60},
>> +     { 196,  58},
>> +     { 195,  55},
>> +     { 194,  53},
>> +     { 193,  50},
>> +     { 192,  48},
>> +     { 191,  45},
>> +     { 190,  43},
>> +     { 189,  40},
>> +     { 188,  38},
>> +     { 187,  35},
>> +     { 186,  33},
>> +     { 185,  30},
>> +     { 184,  28},
>> +     { 183,  25},
>> +     { 182,  23},
>> +     { 181,  20},
>> +     { 180,  18},
>> +     { 179,  15},
>> +     { 178,  13},
>> +     { 177,  10},
>> +     { 176,   8},
>> +     { 175,   5},
>> +     {   0,   0},
>> +};
>> +
>> +
>>  static void spitz_charger_init(void)
>>  {
>>       pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
>> @@ -103,7 +190,7 @@
>>       PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
>>       PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
>>       PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
>> -     PKSR = 0xffffffff; // clear
>> +     PKSR = 0xffffffff; /* clear */
>>
>>       /* nRESET_OUT Disable */
>>       PSLR |= PSLR_SL_ROD;
>> @@ -149,7 +236,7 @@
>>       if (resume_on_alarm && (PEDR & PWER_RTC))
>>               is_resume |= PWER_RTC;
>>
>> -     dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
>> +     dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
>>       return is_resume;
>>  }
>>
>> @@ -160,7 +247,7 @@
>>
>>  unsigned long spitzpm_read_devdata(int type)
>>  {
>> -     switch(type) {
>> +     switch (type) {
>>       case SHARPSL_STATUS_ACIN:
>>               return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
>>       case SHARPSL_STATUS_LOCK:
>> @@ -199,7 +286,7 @@
>>  #if defined(CONFIG_LCD_CORGI)
>>       .backlight_limit = corgi_lcd_limit_intensity,
>>  #elif defined(CONFIG_BACKLIGHT_CORGI)
>> -        .backlight_limit  = corgibl_limit_intensity,
>> +     .backlight_limit  = corgibl_limit_intensity,
>>  #endif
>>       .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
>>       .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
>> @@ -241,7 +328,7 @@
>>
>>  static void spitzpm_exit(void)
>>  {
>> -     platform_device_unregister(spitzpm_device);
>> +     platform_device_unregister(spitzpm_device);
>>  }
>>
>>  module_init(spitzpm_init);
>>
>>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>



More information about the linux-arm-kernel mailing list