[PATCH 08/14] omap: Use ioremap for omap4 L4 code
Tony Lindgren
tony at atomide.com
Fri Oct 16 19:46:22 EDT 2009
* Tony Lindgren <tony at atomide.com> [091016 16:42]:
> Use ioremap for omap4 L4 code
Santosh, can you please check and ack this patch?
Especially some of the ioremap sizes may be wrong. Also, this one
I cannot boot test, so it's just compile tested.
Regards,
Tony
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
> arch/arm/mach-omap2/board-4430sdp.c | 13 ++++++++++--
> arch/arm/mach-omap2/omap-smp.c | 28 ++++++++++++++++++++-----
> arch/arm/mach-omap2/timer-gp.c | 3 ++-
> arch/arm/plat-omap/include/mach/entry-macro.S | 2 ++
> arch/arm/plat-omap/include/mach/omap44xx.h | 5 ----
> 5 files changed, 37 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index eb37c40..2a7b901 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
>
> static void __init gic_init_irq(void)
> {
> - gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
> - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
> + void __iomem *base;
> +
> + /* Static mapping, never released */
> + base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
> + BUG_ON(!base);
> + gic_dist_init(0, base, 29);
> +
> + /* Static mapping, never released */
> + base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
> + BUG_ON(!base);
> + gic_cpu_init(0, OMAP44XX_GIC_CPU_BASE);
> }
>
> static void __init omap_4430sdp_init_irq(void)
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 48ee295..a1b618c 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -26,11 +26,11 @@
> #include <mach/hardware.h>
>
> /* Registers used for communicating startup information */
> -#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
> -#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
> +static void __iomem *omap4_auxcoreboot_reg0;
> +static void __iomem *omap4_auxcoreboot_reg1;
>
> /* SCU base address */
> -static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
> +static void __iomem *scu_base;
>
> /*
> * Use SCU config register to count number of cores
> @@ -46,6 +46,8 @@ static DEFINE_SPINLOCK(boot_lock);
>
> void __cpuinit platform_secondary_init(unsigned int cpu)
> {
> + void __iomem *gic_cpu_base;
> +
> trace_hardirqs_off();
>
> /*
> @@ -54,7 +56,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
> * for us: do so
> */
>
> - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
> + /* Static mapping, never released */
> + gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
> + BUG_ON(!gic_cpu_base);
> + gic_cpu_init(0, gic_cpu_base);
>
> /*
> * Synchronise with the boot thread.
> @@ -79,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
> * the AuxCoreBoot1 register is updated with cpu state
> * A barrier is added to ensure that write buffer is drained
> */
> - __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
> + __raw_writel(cpu, omap4_auxcoreboot_reg1);
> smp_wmb();
>
> timeout = jiffies + (1 * HZ);
> @@ -104,7 +109,7 @@ static void __init wakeup_secondary(void)
> * A barrier is added to ensure that write buffer is drained
> */
> __raw_writel(virt_to_phys(omap_secondary_startup), \
> - OMAP4_AUXCOREBOOT_REG0);
> + omap4_auxcoreboot_reg0);
> smp_wmb();
>
> /*
> @@ -130,6 +135,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> {
> unsigned int ncores = get_core_count();
> unsigned int cpu = smp_processor_id();
> + void __iomem *omap4_wkupgen_base;
> int i;
>
> /* sanity check */
> @@ -161,6 +167,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> for (i = 0; i < max_cpus; i++)
> set_cpu_present(i, true);
>
> + /* Never released */
> + omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
> + BUG_ON(!omap4_wkupgen_base);
> + omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
> + omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x804;
> +
> + /* Never released */
> + scu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
> + BUG_ON(!scu_base);
> +
> if (max_cpus > 1) {
> /*
> * Enable the local timer or broadcast device for the
> diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
> index e2338c0..cd72970 100644
> --- a/arch/arm/mach-omap2/timer-gp.c
> +++ b/arch/arm/mach-omap2/timer-gp.c
> @@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void)
> static void __init omap2_gp_timer_init(void)
> {
> #ifdef CONFIG_LOCAL_TIMERS
> - twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
> + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
> + BUG_ON(!twd_base);
> #endif
> omap_dm_timer_init();
>
> diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
> index abe0864..3bad928 100644
> --- a/arch/arm/plat-omap/include/mach/entry-macro.S
> +++ b/arch/arm/plat-omap/include/mach/entry-macro.S
> @@ -104,6 +104,8 @@
>
> .endm
> #else
> +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
> +
> /*
> * The interrupt numbering scheme is defined in the
> * interrupt controller spec. To wit:
> diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
> index b3ba5ac..8b4a578 100644
> --- a/arch/arm/plat-omap/include/mach/omap44xx.h
> +++ b/arch/arm/plat-omap/include/mach/omap44xx.h
> @@ -33,14 +33,9 @@
> #define IRQ_SIR_IRQ 0x0040
> #define OMAP44XX_GIC_DIST_BASE 0x48241000
> #define OMAP44XX_GIC_CPU_BASE 0x48240100
> -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
> #define OMAP44XX_SCU_BASE 0x48240000
> -#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
> #define OMAP44XX_LOCAL_TWD_BASE 0x48240600
> -#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
> -#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
> #define OMAP44XX_WKUPGEN_BASE 0x48281000
> -#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
>
> #endif /* __ASM_ARCH_OMAP44XX_H */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list