spitz: add gpio button support (fixes regression)

[Pavel Machek]

Hi!

> > > So what's the conclusion of the patch? Any ACK/NAK or patch needs updating?
> 
> Well, AK_INT as it is implemented does not give any useful information,
> but it does not break anything. When inserting or removing remote, or
> (any) remote key is pressed, it generates one or more switch events.
> This code will have to be removed after implementing full remote support
> (turning pull-up resistor may cause false events, ???insert/remove needs
> more aggressive debounce), so I would prefer not adding AK_INT support.
> (See patch below.)

Ok.

> > Please take this updated version.
> 
> > Spitz switched to generic matrix-gpio keyboard driver in 2.6.32-rc0,
> > but that means that support for power button and lid switches was
> > lost. This restores it, using button-gpio code.
> 
> I just tested it. It returns keys function, but suspend button does not
> cause suspend. Just an input event occurs, see below for output from
> evtest. Resume after "echo mem >/sys/power/state" is impossible. I think
> it is not intended behavior.
> ???

Well, resume is hit by second regression.

Suspend key.... I restored it to the level of functionality in
2.6.31 :-).

> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index ee8d603..a8ef058 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -15,6 +15,7 @@
>  #include <linux/kernel.h>
>  #include <linux/platform_device.h>
>  #include <linux/delay.h>
> +#include <linux/gpio_keys.h>
>  #include <linux/gpio.h>
>  #include <linux/leds.h>
>  #include <linux/mtd/physmap.h>
> @@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
>  };
>  
>  
> +static struct gpio_keys_button spitz_gpio_keys[] = {
> +	{
> +		.type	= EV_KEY,
> +		.code	= KEY_SUSPEND,
> +		.gpio	= SPITZ_GPIO_ON_KEY,
> +		.desc	= "Power button",
> +		.wakeup	= 1,
> +	},
> +	/* Two buttons detecting the LID state */
> +	{
> +		.type	= EV_SW,
> +		.code	= 0,
> +		.gpio	= SPITZ_GPIO_SWA,
> +		.desc	= "Lid SWA",
> +	},
> +	{
> +		.type	= EV_SW,
> +		.code	= 1,
> +		.gpio	= SPITZ_GPIO_SWB,
> +		.desc	= "Lid SWB",
> +	},
> +};
> +
> +static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
> +	.buttons	= spitz_gpio_keys,
> +	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
> +};
> +
> +static struct platform_device spitz_gpio_keys_device = {
> +	.name	= "gpio-keys",
> +	.id	= -1,
> +	.dev	= {
> +		.platform_data	= &spitz_gpio_keys_platform_data,
> +	},
> +};
> +
> +
>  /*
>   * Spitz LEDs
>   */
> @@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
>  static struct platform_device *devices[] __initdata = {
>  	&spitzscoop_device,
>  	&spitzkbd_device,
> +	&spitz_gpio_keys_device,
>  	&spitzled_device,
>  	&sharpsl_nand_device,
>  	&sharpsl_rom_device,
> 

Ack. Someone please apply it.
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html