[PATCH 24/27] PM: Disable usb host HW save and restore

[Kevin Hilman]

From: Kalle Jokiniemi <kalle.jokiniemi at digia.com>

The hardware SAVEANDRESTORE mechanism seems to leave
USB HOST power domain permanently into active state
after one transition from off to active state.
Disabling for now.

Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi at nokia.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
 arch/arm/mach-omap2/powerdomains34xx.h |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 4dcf94b..aa557b2 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -338,7 +338,13 @@ static struct powerdomain usbhost_pwrdm = {
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
-	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
+	/*
+	 * REVISIT: Enabling usb host save and restore mechanism seems to
+	 * leave the usb host domain permanently in ACTIVE mode after
+	 * changing the usb host power domain state from OFF to active once.
+	 * Disabling for now.
+	 */
+	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
-- 
1.6.4.3