[PATCH 12/27] OMAP: PM: DMA context save/restore for off-mode support
Kevin Hilman
khilman at deeprootsystems.com
Wed Oct 14 17:57:55 EDT 2009
From: Tero Kristo <tero.kristo at nokia.com>
For HS/EMU devices, these additional features are also used:
- DMA interrupt disable routine added
- Added DMA controller reset to DMA context restore
Signed-off-by: Tero Kristo <tero.kristo at nokia.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
arch/arm/mach-omap2/pm34xx.c | 3 ++
arch/arm/plat-omap/dma.c | 41 +++++++++++++++++++++++++++++++++
arch/arm/plat-omap/include/mach/dma.h | 5 ++++
3 files changed, 49 insertions(+), 0 deletions(-)
mode change 100644 => 100755 arch/arm/plat-omap/include/mach/dma.h
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b1d90e5..764bf2c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -34,6 +34,7 @@
#include <mach/serial.h>
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#include <mach/dma.h>
#include <asm/tlbflush.h>
@@ -95,6 +96,7 @@ static void omap3_core_save_context(void)
omap3_gpmc_save_context();
/* Save the system control module context, padconf already save above*/
omap3_control_save_context();
+ omap_dma_global_context_save();
}
static void omap3_core_restore_context(void)
@@ -105,6 +107,7 @@ static void omap3_core_restore_context(void)
omap3_gpmc_restore_context();
/* Restore the interrupt controller context */
omap3_intc_restore_context();
+ omap_dma_global_context_restore();
}
/*
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 8227312..4cb2aab 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -54,6 +54,12 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
static int enable_1510_mode;
+static struct omap_dma_global_context_registers {
+ u32 dma_irqenable_l0;
+ u32 dma_ocp_sysconfig;
+ u32 dma_gcr;
+} omap_dma_global_context;
+
struct omap_dma_lch {
int next_lch;
int dev_id;
@@ -2340,6 +2346,41 @@ void omap_stop_lcd_dma(void)
}
EXPORT_SYMBOL(omap_stop_lcd_dma);
+void omap_dma_global_context_save(void)
+{
+ omap_dma_global_context.dma_irqenable_l0 =
+ dma_read(IRQENABLE_L0);
+ omap_dma_global_context.dma_ocp_sysconfig =
+ dma_read(OCP_SYSCONFIG);
+ omap_dma_global_context.dma_gcr = dma_read(GCR);
+}
+EXPORT_SYMBOL(omap_dma_global_context_save);
+
+void omap_dma_global_context_restore(void)
+{
+ dma_write(0x2, OCP_SYSCONFIG);
+ while (!__raw_readl(omap_dma_base + OMAP_DMA4_SYSSTATUS))
+ ;
+ dma_write(omap_dma_global_context.dma_gcr, GCR);
+ dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+ OCP_SYSCONFIG);
+ dma_write(omap_dma_global_context.dma_irqenable_l0,
+ IRQENABLE_L0);
+}
+EXPORT_SYMBOL(omap_dma_global_context_restore);
+
+void omap_dma_disable_irq(int lch)
+{
+ u32 val;
+
+ if (cpu_class_is_omap2()) {
+ /* Disable interrupts */
+ val = dma_read(IRQENABLE_L0);
+ val &= ~(1 << lch);
+ dma_write(val, IRQENABLE_L0);
+ }
+}
+
/*----------------------------------------------------------------------------*/
static int __init omap_init_dma(void)
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
old mode 100644
new mode 100755
index 72f680b..1c017b2
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -633,6 +633,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
extern int omap_get_dma_index(int lch, int *ei, int *fi);
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
extern int omap_request_dma_chain(int dev_id, const char *dev_name,
--
1.6.4.3
More information about the linux-arm-kernel
mailing list