[PATCH 12/17] OMAP7XX: Replace omap730 references in irqs.h and all users
Alistair Buxton
a.j.buxton at gmail.com
Wed Oct 14 15:51:31 EDT 2009
This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.
Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users.
Signed-off-by: Alistair Buxton <a.j.buxton at gmail.com>
Reviewed-by: Zebediah C. McClure <zmc at lurian.net>
---
arch/arm/mach-omap1/board-fsample.c | 6 +-
arch/arm/mach-omap1/board-perseus2.c | 6 +-
arch/arm/mach-omap1/irq.c | 2 +-
arch/arm/mach-omap1/mcbsp.c | 8 +-
arch/arm/mach-omap1/pm.c | 10 +-
arch/arm/mach-omap1/serial.c | 4 +-
arch/arm/plat-omap/gpio.c | 14 +-
arch/arm/plat-omap/include/mach/entry-macro.S | 2 +-
arch/arm/plat-omap/include/mach/irqs.h | 148 ++++++++++++------------
arch/arm/plat-omap/usb.c | 4 +-
10 files changed, 102 insertions(+), 102 deletions(-)
diff --git a/arch/arm/mach-omap1/board-fsample.c
b/arch/arm/mach-omap1/board-fsample.c
index e53f774..74720e6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = INT_730_MPU_EXT_NIRQ,
+ .start = INT_7XX_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
@@ -196,8 +196,8 @@ static struct platform_device smc91x_device = {
static struct resource kp_resources[] = {
[0] = {
- .start = INT_730_MPUIO_KEYPAD,
- .end = INT_730_MPUIO_KEYPAD,
+ .start = INT_7XX_MPUIO_KEYPAD,
+ .end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-omap1/board-perseus2.c
b/arch/arm/mach-omap1/board-perseus2.c
index ec22838..2f897cf 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = INT_730_MPU_EXT_NIRQ,
+ .start = INT_7XX_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
@@ -163,8 +163,8 @@ static struct platform_device smc91x_device = {
static struct resource kp_resources[] = {
[0] = {
- .start = INT_730_MPUIO_KEYPAD,
- .end = INT_730_MPUIO_KEYPAD,
+ .start = INT_7XX_MPUIO_KEYPAD,
+ .end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index c05999c..704a80c 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -234,7 +234,7 @@ void __init omap_init_irq(void)
/* Unmask level 2 handler */
if (cpu_is_omap7xx())
- omap_unmask_irq(INT_730_IH2_IRQ);
+ omap_unmask_irq(INT_7XX_IH2_IRQ);
else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 06f380b..7ccca00 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -85,16 +85,16 @@ static struct omap_mcbsp_platform_data
omap730_mcbsp_pdata[] = {
.phys_base = OMAP730_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
- .rx_irq = INT_730_McBSP1RX,
- .tx_irq = INT_730_McBSP1TX,
+ .rx_irq = INT_7XX_McBSP1RX,
+ .tx_irq = INT_7XX_McBSP1TX,
.ops = &omap1_mcbsp_ops,
},
{
.phys_base = OMAP730_MCBSP2_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
- .rx_irq = INT_730_McBSP2RX,
- .tx_irq = INT_730_McBSP2TX,
+ .rx_irq = INT_7XX_McBSP2RX,
+ .tx_irq = INT_7XX_McBSP2TX,
.ops = &omap1_mcbsp_ops,
},
};
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 12f246e..58479c7 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -184,8 +184,8 @@ static void omap_pm_wakeup_setup(void)
* wake up to a GPIO interrupt.
*/
if (cpu_is_omap7xx())
- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+ level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
else if (cpu_is_omap15xx())
level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
@@ -197,8 +197,8 @@ static void omap_pm_wakeup_setup(void)
if (cpu_is_omap7xx()) {
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
- OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+ omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
+ OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
OMAP_IH2_1_MIR);
} else if (cpu_is_omap15xx()) {
level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
@@ -687,7 +687,7 @@ static int __init omap_pm_init(void)
pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+ setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
else if (cpu_is_omap16xx())
setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 49381e2..ed07af1 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -113,8 +113,8 @@ void __init omap_serial_init(void)
if (cpu_is_omap7xx()) {
serial_platform_data[0].regshift = 0;
serial_platform_data[1].regshift = 0;
- serial_platform_data[0].irq = INT_730_UART_MODEM_1;
- serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
+ serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
+ serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
}
if (cpu_is_omap15xx()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 665ca05..22f6e68 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -221,13 +221,13 @@ static struct gpio_bank gpio_bank_1510[2] = {
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
static struct gpio_bank gpio_bank_730[7] = {
- { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
- { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
- { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE +
32, METHOD_GPIO_730 },
- { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE +
64, METHOD_GPIO_730 },
- { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE +
96, METHOD_GPIO_730 },
- { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128,
METHOD_GPIO_730 },
- { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160,
METHOD_GPIO_730 },
+ { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP730_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
+ { OMAP730_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE +
32, METHOD_GPIO_730 },
+ { OMAP730_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE +
64, METHOD_GPIO_730 },
+ { OMAP730_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE +
96, METHOD_GPIO_730 },
+ { OMAP730_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128,
METHOD_GPIO_730 },
+ { OMAP730_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160,
METHOD_GPIO_730 },
};
#endif
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S
b/arch/arm/plat-omap/include/mach/entry-macro.S
index bcf7158..abe0864 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -21,7 +21,7 @@
(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-#define INT_IH2_IRQ INT_730_IH2_IRQ
+#define INT_IH2_IRQ INT_7XX_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP15XX)
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP16XX)
diff --git a/arch/arm/plat-omap/include/mach/irqs.h
b/arch/arm/plat-omap/include/mach/irqs.h
index 7f338f0..6a6d028 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -86,26 +86,26 @@
#define INT_1610_SSR_FIFO_0 29
/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
*/
-#define INT_730_IH2_FIQ 0
-#define INT_730_IH2_IRQ 1
-#define INT_730_USB_NON_ISO 2
-#define INT_730_USB_ISO 3
-#define INT_730_ICR 4
-#define INT_730_EAC 5
-#define INT_730_GPIO_BANK1 6
-#define INT_730_GPIO_BANK2 7
-#define INT_730_GPIO_BANK3 8
-#define INT_730_McBSP2TX 10
-#define INT_730_McBSP2RX 11
-#define INT_730_McBSP2RX_OVF 12
-#define INT_730_LCD_LINE 14
-#define INT_730_GSM_PROTECT 15
-#define INT_730_TIMER3 16
-#define INT_730_GPIO_BANK5 17
-#define INT_730_GPIO_BANK6 18
-#define INT_730_SPGIO_WR 29
+#define INT_7XX_IH2_FIQ 0
+#define INT_7XX_IH2_IRQ 1
+#define INT_7XX_USB_NON_ISO 2
+#define INT_7XX_USB_ISO 3
+#define INT_7XX_ICR 4
+#define INT_7XX_EAC 5
+#define INT_7XX_GPIO_BANK1 6
+#define INT_7XX_GPIO_BANK2 7
+#define INT_7XX_GPIO_BANK3 8
+#define INT_7XX_McBSP2TX 10
+#define INT_7XX_McBSP2RX 11
+#define INT_7XX_McBSP2RX_OVF 12
+#define INT_7XX_LCD_LINE 14
+#define INT_7XX_GSM_PROTECT 15
+#define INT_7XX_TIMER3 16
+#define INT_7XX_GPIO_BANK5 17
+#define INT_7XX_GPIO_BANK6 18
+#define INT_7XX_SPGIO_WR 29
/*
* IRQ numbers for interrupt handler 2
@@ -183,62 +183,62 @@
#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
*/
-#define INT_730_HW_ERRORS (0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
-#define INT_730_CFCD (2 + IH2_BASE)
-#define INT_730_CFIREQ (3 + IH2_BASE)
-#define INT_730_I2C (4 + IH2_BASE)
-#define INT_730_PCC (5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
-#define INT_730_SPI_100K_1 (7 + IH2_BASE)
-#define INT_730_SYREN_SPI (8 + IH2_BASE)
-#define INT_730_VLYNQ (9 + IH2_BASE)
-#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
-#define INT_730_McBSP1TX (11 + IH2_BASE)
-#define INT_730_McBSP1RX (12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
-#define INT_730_MCSI (16 + IH2_BASE)
-#define INT_730_uWireTX (17 + IH2_BASE)
-#define INT_730_uWireRX (18 + IH2_BASE)
-#define INT_730_SMC_CD (19 + IH2_BASE)
-#define INT_730_SMC_IREQ (20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
-#define INT_730_TIMER32K (22 + IH2_BASE)
-#define INT_730_MMC_SDIO (23 + IH2_BASE)
-#define INT_730_UPLD (24 + IH2_BASE)
-#define INT_730_USB_HHC_1 (27 + IH2_BASE)
-#define INT_730_USB_HHC_2 (28 + IH2_BASE)
-#define INT_730_USB_GENI (29 + IH2_BASE)
-#define INT_730_USB_OTG (30 + IH2_BASE)
-#define INT_730_CAMERA_IF (31 + IH2_BASE)
-#define INT_730_RNG (32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN (34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
-#define INT_730_SHA1_MD5 (36 + IH2_BASE)
-#define INT_730_SPI_100K_2 (37 + IH2_BASE)
-#define INT_730_RNG_IDLE (38 + IH2_BASE)
-#define INT_730_MPUIO (39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_730_DMA_CH6 (53 + IH2_BASE)
-#define INT_730_DMA_CH7 (54 + IH2_BASE)
-#define INT_730_DMA_CH8 (55 + IH2_BASE)
-#define INT_730_DMA_CH9 (56 + IH2_BASE)
-#define INT_730_DMA_CH10 (57 + IH2_BASE)
-#define INT_730_DMA_CH11 (58 + IH2_BASE)
-#define INT_730_DMA_CH12 (59 + IH2_BASE)
-#define INT_730_DMA_CH13 (60 + IH2_BASE)
-#define INT_730_DMA_CH14 (61 + IH2_BASE)
-#define INT_730_DMA_CH15 (62 + IH2_BASE)
-#define INT_730_NAND (63 + IH2_BASE)
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_7XX_CFCD (2 + IH2_BASE)
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
+#define INT_7XX_I2C (4 + IH2_BASE)
+#define INT_7XX_PCC (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_7XX_MCSI (16 + IH2_BASE)
+#define INT_7XX_uWireTX (17 + IH2_BASE)
+#define INT_7XX_uWireRX (18 + IH2_BASE)
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
+#define INT_7XX_UPLD (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
+#define INT_7XX_RNG (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
+#define INT_7XX_MPUIO (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
+#define INT_7XX_NAND (63 + IH2_BASE)
#define INT_24XX_SYS_NIRQ 7
#define INT_24XX_SDMA_IRQ0 12
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 980d2eb..3c40b85 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -615,7 +615,7 @@ omap_otg_init(struct omap_usb_config *config)
syscon &= ~HST_IDLE_EN;
ohci_device.dev.platform_data = config;
if (cpu_is_omap7xx())
- ohci_resources[1].start = INT_730_USB_HHC_1;
+ ohci_resources[1].start = INT_7XX_USB_HHC_1;
status = platform_device_register(&ohci_device);
if (status)
pr_debug("can't register OHCI device, %d\n", status);
@@ -627,7 +627,7 @@ omap_otg_init(struct omap_usb_config *config)
syscon &= ~OTG_IDLE_EN;
otg_device.dev.platform_data = config;
if (cpu_is_omap7xx())
- otg_resources[1].start = INT_730_USB_OTG;
+ otg_resources[1].start = INT_7XX_USB_OTG;
status = platform_device_register(&otg_device);
if (status)
pr_debug("can't register OTG device, %d\n", status);
--
1.6.5
More information about the linux-arm-kernel
mailing list