[PATCH 04/16] i2c-designware: i2c_dw_read: Take "struct dw_i2c_dev" pointer
Shinya Kuribayashi
shinya.kuribayashi at necel.com
Mon Oct 12 22:49:42 EDT 2009
There's no need to interface using with "struct i2c_adapter" pointer.
Let's use a local "struct dw_i2c_dev" pointer, instead.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi at necel.com>
---
drivers/i2c/busses/i2c-designware.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index 0164092..c6a35bf 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -328,9 +328,8 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
}
static void
-i2c_dw_read(struct i2c_adapter *adap)
+i2c_dw_read(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
struct i2c_msg *msgs = dev->msgs;
int num = dev->msgs_num;
u32 addr = msgs[dev->msg_read_idx].addr;
@@ -416,7 +415,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (likely(!dev->cmd_err)) {
/* read rx fifo, and disable the adapter */
do {
- i2c_dw_read(adap);
+ i2c_dw_read(dev);
} while (dev->status & STATUS_READ_IN_PROGRESS);
writel(0, dev->base + DW_IC_ENABLE);
ret = num;
@@ -450,7 +449,7 @@ static void dw_i2c_pump_msg(unsigned long data)
struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
u32 intr_mask;
- i2c_dw_read(&dev->adapter);
+ i2c_dw_read(dev);
i2c_dw_xfer_msg(&dev->adapter);
intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
--
1.6.5
More information about the linux-arm-kernel
mailing list