[PATCH v1.0 2/4] TS72XX: Allow to override machine ID

[Christian Gagneraud]

Marek Vasut wrote:
> Dne Po 5. října 2009 17:15:55 Mikael Pettersson napsal(a):
>> Christian Gagneraud writes:
>>  > H Hartley Sweeten wrote:
>>  > > On Saturday, October 03, 2009 6:14 PM, Christian Gagneraud wrote:
>>  > >> From: Matthieu Crapet <mcrapet at gmail.com>
>>  > >>
>>  > >> In early days Technologic Systems fixed the 0x163 value in redboot
>>  > >> instead of 0x2a1, this patch allow to overwrite it.
>>  > >>
>>  > >> Signed-off-by: Matthieu Crapet <mcrapet at gmail.com>
>>  > >> Signed-off-by: Christian Gagneraud <cgagneraud at techworks.ie>
>>  > >
>>  > > As others have already pointed out, this is a pure hack and not
>>  > > suitable for mainline.
>>  > >
>>  > > The bootloader for systems that needs this really should be updated.
>>  > > Machine ID 0x163 (355) is ARCH_CX861XX which isn't an ep93xx based
>>  > > system and doesn't even have a platform init in mainline.
>>  >
>>  > I see your point, but what if the bootloader can't be updated? Does
>>  > that mean that people using these boards will have to bother with
>>  > applying patches on mainline kernel for ever?
>>  > Can't we find a way to address this issue, I'm pretty sure this is not
>>  > the only board that need this kind of asm hack.
>>
>> All you need to do is to wrap the kernel binary image with
>> a small shim that corrects the Machine ID in r1. devio can
>> do that, as can (I think) printf(1).
>>
>> No need to replace the bootloader or hack the kernel.
> 
> devio 'wl 0xe59f1000,4' 'wl 0xe28ff004,4' 'wl $MACH,4' >> id.bin
> cat id.bin zImage > zImage.crippled

Thank you for the tip, i will have a look at this.

Regards,
Chris

> 
> Like this (I used this on Toradex board where those morons fixed machine id too).
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>