[PATCH] s3c2440: mini2440 buildfix

[Anand Gadiyar]

s3c2440: mini2440 buildfix

Fix the following two build errors seen with mini2440_defconfig:

  CC      arch/arm/plat-s3c24xx/cpu.o
arch/arm/plat-s3c24xx/cpu.c:84: error: 's3c2410a_init' undeclared here (not in a function)
make[1]: *** [arch/arm/plat-s3c24xx/cpu.o] Error 1
make: *** [arch/arm/plat-s3c24xx] Error 2

  LD      .tmp_vmlinux1
arch/arm/mach-s3c2440/built-in.o:(.init.data+0x724): undefined reference to `s3c_device_usb'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Anand Gadiyar <gadiyar at ti.com>
CC: Gaye Abdoulaye Walsimou <walsimou at walsimou.com>
CC: Ben Dooks <ben-linux at fluff.org>
---
The latter error was reported by Gaye Abdoulaye Walsimou.
I hit the former error while attempting to fix it.

I don't have this board, so I do not know if this is correct.
Build-tested only.

- Anand

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index d7bba91..64f9e6d 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -102,6 +102,7 @@ config MACH_MINI2440
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index b6deeef..82ab4aa 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal);
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
+#define s3c2410a_init NULL
 #endif
 
 extern int s3c2410_baseclk_add(void);