[PATCH 6/9] add gpiolib support to ucb1x00
Thomas Kunze
thommycheck at gmx.de
Tue Feb 10 08:50:56 EST 2009
The old access methods to the gpios will be removed when
all users has been converted. (mainly ucb1x00-ts)
Signed-off-by: Thomas Kunze <thommycheck at gmx.de>
---
arch/arm/mach-sa1100/include/mach/mcp.h | 1 +
drivers/mfd/mcp-sa11x0.c | 1 +
drivers/mfd/ucb1x00-core.c | 87 ++++++++++++++++++++++++++++++-
include/linux/mfd/mcp.h | 1 +
include/linux/mfd/ucb1x00.h | 3 +
5 files changed, 91 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a..ed1a331 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@ struct mcp_plat_data {
u32 mccr0;
u32 mccr1;
unsigned int sclk_rate;
+ int gpio_base;
};
#endif
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 2121898..2584272 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
+ mcp->gpio_base = data->gpio_base;
platform_set_drvdata(pdev, mcp);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 61f3933..e0d7700 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,11 +25,11 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/mfd/ucb1x00.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/hardware.h>
-
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
@@ -107,6 +107,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
return ucb1x00_reg_read(ucb, UCB_IO_DATA);
}
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+ , int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir |= (1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
@@ -475,6 +529,7 @@ static int ucb1x00_probe(struct mcp *mcp)
struct ucb1x00_driver *drv;
unsigned int id;
int ret = -ENODEV;
+ int temp;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
@@ -507,12 +562,27 @@ static int ucb1x00_probe(struct mcp *mcp)
goto err_free;
}
+ ucb->gpio.base = -1;
+ if (mcp->gpio_base != 0) {
+ ucb->gpio.label = dev_name(&ucb->dev);
+ ucb->gpio.base = mcp->gpio_base;
+ ucb->gpio.ngpio = 10;
+ ucb->gpio.set = ucb1x00_gpio_set;
+ ucb->gpio.get = ucb1x00_gpio_get;
+ ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+ ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ret = gpiochip_add(&ucb->gpio);
+ if (ret)
+ goto err_free;
+ } else
+ dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
"UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
ucb->irq, ret);
- goto err_free;
+ goto err_gpio;
}
mcp_set_drvdata(mcp, ucb);
@@ -521,6 +591,7 @@ static int ucb1x00_probe(struct mcp *mcp)
if (ret)
goto err_irq;
+
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
list_add(&ucb->node, &ucb1x00_devices);
@@ -528,10 +599,14 @@ static int ucb1x00_probe(struct mcp *mcp)
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
+
goto out;
err_irq:
free_irq(ucb->irq, ucb);
+ err_gpio:
+ if (ucb->gpio.base != -1)
+ temp = gpiochip_remove(&ucb->gpio);
err_free:
kfree(ucb);
err_disable:
@@ -544,6 +619,7 @@ static void ucb1x00_remove(struct mcp *mcp)
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
+ int ret;
mutex_lock(&ucb1x00_mutex);
list_del(&ucb->node);
@@ -553,6 +629,12 @@ static void ucb1x00_remove(struct mcp *mcp)
}
mutex_unlock(&ucb1x00_mutex);
+ if (ucb->gpio.base != -1) {
+ ret = gpiochip_remove(&ucb->gpio);
+ if (ret)
+ dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
+ }
+
free_irq(ucb->irq, ucb);
device_unregister(&ucb->dev);
}
@@ -603,6 +685,7 @@ static int ucb1x00_resume(struct mcp *mcp)
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct ucb1x00_dev *dev;
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(dev, &ucb->devs, dev_node) {
if (dev->drv->resume)
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
index be95e09..ee49670 100644
--- a/include/linux/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -26,6 +26,7 @@ struct mcp {
dma_device_t dma_telco_rd;
dma_device_t dma_telco_wr;
struct device attached_device;
+ int gpio_base;
};
struct mcp_ops {
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index eac3463..aa9c378 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -11,6 +11,8 @@
#define UCB1200_H
#include <linux/mfd/mcp.h>
+#include <linux/gpio.h>
+
#define UCB_IO_DATA 0x00
#define UCB_IO_DIR 0x01
@@ -123,6 +125,7 @@ struct ucb1x00 {
struct device dev;
struct list_head node;
struct list_head devs;
+ struct gpio_chip gpio;
};
struct ucb1x00_driver;
--
1.6.0.4
--------------080106070900050803030700--
More information about the linux-arm-kernel
mailing list