[PATCH 0/4] Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet

[Andy Green]

The following series adds platform defines for s3c64xx SROM unit,
and uses it to configure nCS1 in the SMDK mach- file so the ethernet
works regardless of what the bootloader may or may not have done.

It also adds a comment about how the SMDK must be physically
configured to allow the Ethernet to work and removes a magic
constant address.

---

Andy Green (4):
      smdk6410-comment-ethernet-prerequisites.patch
      smdk6410-add-chipselect-setup.patch
      s3c64xx-add-srom-physical-virtual-mapping.patch
      s3c64xx-introduce-srom-registers.patch


 arch/arm/mach-s3c6400/include/mach/map.h       |   14 ++++++
 arch/arm/mach-s3c6410/mach-smdk6410.c          |   37 ++++++++++++++-
 arch/arm/plat-s3c64xx/cpu.c                    |    5 ++
 arch/arm/plat-s3c64xx/include/plat/regs-srom.h |   59 ++++++++++++++++++++++++
 4 files changed, 113 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-srom.h

-- 
Signature