[PATCH v2] ARM: NUC900: Add cpufreq driver for nuc900 CPUs
Li Jie
eltshanli at gmail.com
Mon Dec 21 04:37:24 EST 2009
Hi, Wan:
This this the cpufreq_driver for NUC900 v2.
Problems which you and Russell mentioned in v1 have been fixed:
1. declare nuc900_set_clkval() in cpu.h
2. use macros instead of numbers
3. rename module, nuc900 -> nuc900-cpufreq
4. include linux/io.h, not asm/io.h
....and so on
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 233a222..600b313 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -539,6 +539,7 @@ config ARCH_W90X900
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_HAS_CPUFREQ
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
At present, the w90x900 has been renamed nuc900, regarding
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 828c032..7f114fb 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -5,7 +5,7 @@
# Object file lists.
obj-y := irq.o time.o mfp.o gpio.o clock.o
-obj-y += clksel.o dev.o cpu.o
+obj-y += clksel.o dev.o cpu.o cpufreq.o
# W90X900 CPU support files
obj-$(CONFIG_CPU_W90P910) += nuc910.o
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 921cef9..7b608b8 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -107,7 +107,7 @@ struct platform_device nuc900_serial_device = {
};
/*Set NUC900 series cpu frequence*/
-static int __init nuc900_set_clkval(unsigned int cpufreq)
+int nuc900_set_clkval(unsigned int cpufreq)
{
unsigned int pllclk, ahbclk, apbclk, val;
@@ -156,6 +156,8 @@ static int __init nuc900_set_clkval(unsigned int cpufreq)
return 0;
}
+EXPORT_SYMBOL(nuc900_set_clkval);
+
static int __init nuc900_set_cpufreq(char *str)
{
unsigned long cpufreq, val;
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 4d58ba1..ca0bce5 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -49,6 +49,7 @@ extern void nuc900_clock_source(struct device *dev,
unsigned char *src);
extern void nuc900_init_clocks(void);
extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
extern void nuc900_board_init(struct platform_device **device, int size);
+extern int nuc900_set_clkval(unsigned int cpufreq);
/* for either public between 910 and 920, or between 920 and 950 */
diff --git a/arch/arm/mach-w90x900/cpufreq.c b/arch/arm/mach-w90x900/cpufreq.c
new file mode 100644
index 0000000..467fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpufreq.c
@@ -0,0 +1,154 @@
+/* linux/arch/arm/mach-w90x900/cpufreq.c
+ *
+ * NUC900 CPUfreq Support
+ *
+ * Li Jie <eltshanli at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#include "cpu.h"
+
+#define CPUFREQ_66M 66000
+#define CPUFREQ_100M 100000
+#define CPUFREQ_120M 120000
+#define CPUFREQ_166M 166000
+#define CPUFREQ_200M 200000
+
+static struct cpufreq_frequency_table nuc900_freq_table[] = {
+ { 0, CPUFREQ_66M },
+ { 1, CPUFREQ_100M },
+ { 2, CPUFREQ_120M },
+ { 3, CPUFREQ_166M },
+ { 4, CPUFREQ_200M },
+ { 5, CPUFREQ_TABLE_END },
+};
+
+static int nuc900_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, nuc900_freq_table);
+}
+
+static unsigned int nuc900_cpufreq_get_speed(unsigned int cpu)
+{
+ int pllclk;
+
+ if (cpu != 0)
+ return 0;
+
+ pllclk = __raw_readl(REG_PLLCON0);
+
+ switch (pllclk) {
+ case PLL_66MHZ:
+ return CPUFREQ_66M;
+ case PLL_100MHZ:
+ return CPUFREQ_100M;
+ case PLL_120MHZ:
+ return CPUFREQ_120M;
+ case PLL_166MHZ:
+ return CPUFREQ_166M;
+ case PLL_200MHZ:
+ return CPUFREQ_200M;
+ }
+
+ pr_err("cpufreq: Failed to get frequency: %x\n", pllclk);
+ return 0;
+}
+
+static int nuc900_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ int ret;
+ unsigned int i;
+ struct cpufreq_freqs freqs;
+
+ ret = cpufreq_frequency_table_target(policy, nuc900_freq_table,
+ target_freq, relation, &i);
+ if (ret != 0)
+ return ret;
+
+ freqs.cpu = 0;
+ freqs.old = nuc900_cpufreq_get_speed(0);
+ freqs.new = nuc900_freq_table[i].frequency;
+ freqs.flags = 0;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ nuc900_set_clkval(freqs.new / 1000);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static int __init nuc900_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = nuc900_cpufreq_get_speed(0);
+
+ policy->cpuinfo.transition_latency = 2 * 1000; /* FIXME, assumed */
+ policy->cpuinfo.min_freq = 66000; /* khz */
+ policy->cpuinfo.max_freq = 200000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, nuc900_freq_table);
+ if (ret != 0)
+ pr_err("cpufreq: Failed to configure frequency table: %d\n",
+ ret);
+
+ return ret;
+}
+
+static struct cpufreq_driver nuc900_cpufreq_driver = {
+ .owner = THIS_MODULE,
+ .flags = 0,
+ .verify = nuc900_cpufreq_verify_speed,
+ .target = nuc900_cpufreq_set_target,
+ .get = nuc900_cpufreq_get_speed,
+ .init = nuc900_cpufreq_driver_init,
+ .name = "nuc900-cpufreq",
+};
+
+static int __init nuc900_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&nuc900_cpufreq_driver);
+}
+
+static void __exit nuc900_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&nuc900_cpufreq_driver);
+}
+
+MODULE_AUTHOR ("Li Jie <eltshanli at gmail.com>");
+MODULE_DESCRIPTION ("cpufreq driver for NUC900");
+MODULE_LICENSE ("GPL");
+
+module_init(nuc900_cpufreq_init);
+module_exit(nuc900_cpufreq_exit);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 51f17b7..ec711f4 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -197,7 +197,7 @@ static struct platform_device nuc900_device_emc = {
/* SPI device */
-static struct w90p910_spi_info nuc900_spiflash_data = {
+static struct nuc900_spi_info nuc900_spiflash_data = {
.num_cs = 1,
.lsb = 0,
.txneg = 1,
--
Regards
Li Jie
More information about the linux-arm-kernel
mailing list