[PATCH] pxa27x_udc: Fix deadlocks on request queueing
Robert Jarzmik
robert.jarzmik at free.fr
Sat Dec 12 09:13:24 EST 2009
As reported by Antonio, there are cases where the ep->lock
can be taken twice, triggering a deadlock.
The typical sequence is :
irq_handler
\
-> gadget.complete()
\
-> pxa27x_udc.pxa_ep_queue() : ep->lock is taken
\
-> gadget.complete()
\
-> pxa27x_udc.pxa_ep_queue() : ep->lock is taken
==> *deadlock*
The patch fixes this by :
- releasing the lock each time gadget.complete() is called
- adding a check in handle_ep() to detect a recursive call,
in which case the function becomes on no-op.
The patch is still not good enough for ep0. For this unique
endpoint, another well thought over patch will be needed.
Reported-by: Antonio Ospite <ospite at studenti.unina.it>
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
drivers/usb/gadget/pxa27x_udc.c | 67 ++++++++++++++++++++++++++++----------
drivers/usb/gadget/pxa27x_udc.h | 6 +++
2 files changed, 55 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 1937d8c..b40067b 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -743,13 +743,14 @@ static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
* @req: pxa request
* @status: usb request status sent to gadget API
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Retire a pxa27x usb request. Endpoint must be locked.
*/
static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
{
- ep_del_request(ep, req);
+ unsigned long flags;
+
if (likely(req->req.status == -EINPROGRESS))
req->req.status = status;
else
@@ -760,7 +761,9 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
&req->req, status,
req->req.actual, req->req.length);
+ local_irq_save(flags);
req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+ local_irq_restore(flags);
}
/**
@@ -768,7 +771,7 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
* @ep: physical endpoint
* @req: pxa request
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Ends endpoint OUT request (completes usb request).
*/
@@ -783,7 +786,7 @@ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
* @ep: physical endpoint
* @req: pxa request
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Ends control endpoint OUT request (completes usb request), and puts
* control endpoint into idle state
@@ -800,7 +803,7 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
* @ep: physical endpoint
* @req: pxa request
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Ends endpoint IN request (completes usb request).
*/
@@ -815,7 +818,7 @@ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
* @ep: physical endpoint
* @req: pxa request
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Ends control endpoint IN request (completes usb request), and puts
* control endpoint into status state
@@ -831,19 +834,25 @@ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
* @ep: pxa endpoint
* @status: usb request status
*
- * Context: ep->lock held
+ * Context: ep->lock released
*
* Dequeues all requests on an endpoint. As a side effect, interrupts will be
* disabled on that endpoint (because no more requests).
*/
static void nuke(struct pxa_ep *ep, int status)
{
- struct pxa27x_request *req;
+ struct pxa27x_request *req;
+ unsigned long flags;
+ spin_lock_irqsave(&ep->lock, flags);
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+ spin_unlock_irqrestore(&ep->lock, flags);
req_done(ep, req, status);
+ spin_lock_irqsave(&ep->lock, flags);
}
+ spin_unlock_irqrestore(&ep->lock, flags);
}
/**
@@ -1123,6 +1132,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
int rc = 0;
int is_first_req;
unsigned length;
+ int recursion_detected;
req = container_of(_req, struct pxa27x_request, req);
udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
@@ -1152,6 +1162,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
return -EMSGSIZE;
spin_lock_irqsave(&ep->lock, flags);
+ recursion_detected = ep->in_handle_ep;
is_first_req = list_empty(&ep->queue);
ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
@@ -1174,11 +1185,13 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
_req->actual = 0;
ep_add_request(ep, req);
+ spin_unlock_irqrestore(&ep->lock, flags);
if (is_ep0(ep)) {
switch (dev->ep0state) {
case WAIT_ACK_SET_CONF_INTERF:
if (length == 0) {
+ ep_del_request(ep, req);
ep_end_in_req(ep, req);
} else {
ep_err(ep, "got a request of %d bytes while"
@@ -1207,11 +1220,11 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
break;
}
} else {
- handle_ep(ep);
+ if (!recursion_detected)
+ handle_ep(ep);
}
out:
- spin_unlock_irqrestore(&ep->lock, flags);
return rc;
}
@@ -1242,13 +1255,14 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
/* make sure it's actually queued on this endpoint */
list_for_each_entry(req, &ep->queue, queue) {
if (&req->req == _req) {
- req_done(ep, req, -ECONNRESET);
rc = 0;
break;
}
}
spin_unlock_irqrestore(&ep->lock, flags);
+ if (!rc)
+ req_done(ep, req, -ECONNRESET);
return rc;
}
@@ -1445,7 +1459,6 @@ static int pxa_ep_disable(struct usb_ep *_ep)
{
struct pxa_ep *ep;
struct udc_usb_ep *udc_usb_ep;
- unsigned long flags;
if (!_ep)
return -EINVAL;
@@ -1455,10 +1468,8 @@ static int pxa_ep_disable(struct usb_ep *_ep)
if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
return -EINVAL;
- spin_lock_irqsave(&ep->lock, flags);
ep->enabled = 0;
nuke(ep, -ESHUTDOWN);
- spin_unlock_irqrestore(&ep->lock, flags);
pxa_ep_fifo_flush(_ep);
udc_usb_ep->pxa_ep = NULL;
@@ -1907,8 +1918,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
} u;
int i;
int have_extrabytes = 0;
+ unsigned long flags;
nuke(ep, -EPROTO);
+ spin_lock_irqsave(&ep->lock, flags);
/*
* In the PXA320 manual, in the section about Back-to-Back setup
@@ -1951,6 +1964,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
if (i < 0)
goto stall;
out:
+ spin_unlock_irqrestore(&ep->lock, flags);
return;
stall:
ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
@@ -2091,7 +2105,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
* Tries to transfer all pending request data into the endpoint and/or
* transfer all pending data in the endpoint into usb requests.
*
- * Is always called when in_interrupt() or with ep->lock held.
+ * Is always called when in_interrupt() and with ep->lock released.
*/
static void handle_ep(struct pxa_ep *ep)
{
@@ -2100,10 +2114,17 @@ static void handle_ep(struct pxa_ep *ep)
u32 udccsr;
int is_in = ep->dir_in;
int loop = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ if (ep->in_handle_ep)
+ goto recursion_detected;
+ ep->in_handle_ep = 1;
do {
completed = 0;
udccsr = udc_ep_readl(ep, UDCCSR);
+
if (likely(!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
struct pxa27x_request, queue);
@@ -2122,15 +2143,25 @@ static void handle_ep(struct pxa_ep *ep)
if (unlikely(is_in)) {
if (likely(!ep_is_full(ep)))
completed = write_fifo(ep, req);
- if (completed)
- ep_end_in_req(ep, req);
} else {
if (likely(epout_has_pkt(ep)))
completed = read_fifo(ep, req);
- if (completed)
+ }
+
+ if (completed) {
+ ep_del_request(ep, req);
+ spin_unlock_irqrestore(&ep->lock, flags);
+ if (is_in)
+ ep_end_in_req(ep, req);
+ else
ep_end_out_req(ep, req);
+ spin_lock_irqsave(&ep->lock, flags);
}
} while (completed);
+
+ ep->in_handle_ep = 0;
+recursion_detected:
+ spin_unlock_irqrestore(&ep->lock, flags);
}
/**
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index e25225e..ff61e48 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -318,6 +318,11 @@ struct udc_usb_ep {
* @queue: requests queue
* @lock: lock to pxa_ep data (queues and stats)
* @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @in_handle_ep: number of recursions of handle_ep() function
+ * Prevents deadlocks or infinite recursions of types :
+ * irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep()
+ * or
+ * pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue()
* @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
* @name: endpoint name (for trace/debug purpose)
* @dir_in: 1 if IN endpoint, 0 if OUT endpoint
@@ -346,6 +351,7 @@ struct pxa_ep {
spinlock_t lock; /* Protects this structure */
/* (queues, stats) */
unsigned enabled:1;
+ unsigned in_handle_ep:1;
unsigned idx:5;
char *name;
--
1.6.3.3
More information about the linux-arm-kernel
mailing list