[PATCH 5/8] OMAP3: clock: add clockdomains for UART1 & 2

[Paul Walmsley]

From: Kevin Hilman <khilman at deeprootsystems.com>

UART1 & 2 were missing clockdomains resulting in broken omap_hwmod
init for these devices.

Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul at pwsan.com>
---
 arch/arm/mach-omap2/clock34xx_data.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 8bdcc9c..c60b19a 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -1500,6 +1500,7 @@ static struct clk uart2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1509,6 +1510,7 @@ static struct clk uart1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };