[PATCH 06/20] imx/mach-mx3: use constants namespaced by the corresponding SOC (easy part)
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Dec 16 13:59:47 EST 2009
This just leaves cpu.c, devices.c and mm.c to clean up. As these files
are used on more than one SOC they need some more work.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Alberto Panizzo <maramaopercheseimorto at gmail.com>
Cc: Valentin Longchamp <valentin.longchamp at epfl.ch>
Cc: Daniel Mack <daniel at caiaq.de>
Cc: Guennadi Liakhovetski <lg at denx.de>
Cc: Yoichi Yuasa <yuasa at linux-mips.org>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
Cc: Magnus Lilja <lilja.magnus at gmail.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Harro Haan <hrhaan at yahoo.com>
Cc: Jean Delvare <khali at linux-fr.org>
Cc: Luotao Fu <l.fu at pengutronix.de>
Cc: Ilya Yanok <yanok at emcraft.com>
---
arch/arm/mach-mx3/armadillo5x0.c | 12 ++++++------
arch/arm/mach-mx3/clock-imx35.c | 4 ++--
arch/arm/mach-mx3/clock.c | 4 ++--
arch/arm/mach-mx3/crm_regs.h | 2 +-
arch/arm/mach-mx3/iomux.c | 2 +-
arch/arm/mach-mx3/kzmarm11.c | 20 ++++++++++----------
arch/arm/mach-mx3/mx31ads.c | 14 +++++++-------
arch/arm/mach-mx3/mx31lilly.c | 8 ++++----
arch/arm/mach-mx3/mx31lite.c | 14 +++++++-------
arch/arm/mach-mx3/mx31moboard.c | 4 ++--
arch/arm/mach-mx3/mx31pdk.c | 10 +++++-----
arch/arm/mach-mx3/mx35pdk.c | 4 ++--
arch/arm/mach-mx3/pcm037.c | 16 ++++++++--------
arch/arm/mach-mx3/pcm043.c | 4 ++--
arch/arm/mach-mx3/qong.c | 14 +++++++-------
15 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 54aab40..aac5f81 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + SZ_64M - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,8 +406,8 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7584b4c..e65e862 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
@@ -504,7 +504,7 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&gpt_clk, IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 27a318a..cc03a61 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -618,14 +618,14 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_read_cpu_rev();
- if (mx31_revision() >= CHIP_REV_2_0) {
+ if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
- mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&ipg_clk, IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa362..e25cd92 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index c66ccbc..6381e56 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
index 6fa99ce..849631e 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/kzmarm11.c
@@ -128,8 +128,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
static struct resource kzm_smsc9118_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + SZ_128K - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
@@ -222,15 +222,15 @@ static void __init kzm_board_init(void)
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
@@ -258,8 +258,8 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 3e7bafa..6699116 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
@@ -494,9 +494,9 @@ static void mxc_init_i2c(void)
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE / 2,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
@@ -541,8 +541,8 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 9ce029f..ffccea9 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0xffff,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
@@ -195,8 +195,8 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 4697164..db741be 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
static struct resource smsc911x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -212,9 +212,9 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
@@ -283,8 +283,8 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b705291..be7d277 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -564,8 +564,8 @@ struct sys_timer mx31moboard_timer = {
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 18715f1..e71e3b4 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
@@ -256,8 +256,8 @@ static struct sys_timer mx31pdk_timer = {
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 0bbc65e..2d11bf0 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -106,8 +106,8 @@ struct sys_timer mx35pdk_timer = {
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6cbaabe..24183aa 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -248,8 +248,8 @@ static struct imxuart_platform_data uart_pdata = {
static struct resource smsc911x_resources[] = {
{
- .start = CS1_BASE_ADDR + 0x300,
- .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+ .start = MX31_CS1_BASE_ADDR + 0x300,
+ .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +281,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 512 * 1024 - 1,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
@@ -518,8 +518,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
static struct resource pcm970_sja1000_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + 0x100 - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -618,8 +618,8 @@ struct sys_timer pcm037_timer = {
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e3aa829..1212194 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -248,8 +248,8 @@ struct sys_timer pcm043_timer = {
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 044511f..3c1e736 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -43,7 +43,7 @@
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
};
static struct resource qong_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
};
static struct resource qong_nand_resource = {
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
@@ -275,8 +275,8 @@ static struct sys_timer qong_timer = {
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
--
1.6.5.2
More information about the linux-arm-kernel
mailing list