[PATCH v2 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
Vimal Singh
vimal.newwork at gmail.com
Mon Dec 14 05:41:59 EST 2009
Last time I forgot to cc linux-arm-kernel at lists.infradead.org. Looping now.
-vimal
On Mon, Dec 14, 2009 at 3:17 PM, Vimal Singh <vimal.newwork at gmail.com> wrote:
> From 6170aa1c63c49a3f09e76258f400230b742fdd6f Mon Sep 17 00:00:00 2001
> From: Vimal Singh <vimalsingh at ti.com>
> Date: Wed, 25 Nov 2009 18:23:15 +0530
> Subject: [PATCH] Introducing 'gpmc-nand.c' for GPMC specific NAND init
>
> Introducing 'gpmc-nand.c' for GPMC specific NAND init.
> For example: GPMC timing parameters and all.
> This patch also migrates gpmc related calls from 'nand/omap2.c'
> to 'gpmc-nand.c'.
>
> Signed-off-by: Vimal Singh <vimalsingh at ti.com>
> ---
> arch/arm/mach-omap2/Makefile | 3 +
> arch/arm/mach-omap2/gpmc-nand.c | 137 ++++++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/nand.h | 6 ++
> drivers/mtd/nand/omap2.c | 26 +------
> 4 files changed, 149 insertions(+), 23 deletions(-)
> create mode 100644 arch/arm/mach-omap2/gpmc-nand.c
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 59b0ccc..0dfe27a 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -103,5 +103,8 @@ obj-y += usb-ehci.o
> onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
> obj-y += $(onenand-m) $(onenand-y)
>
> +nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
> +obj-y += $(nand-m) $(nand-y)
> +
> smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
> obj-y += $(smc91x-m) $(smc91x-y)
> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
> new file mode 100644
> index 0000000..c0e8ba7
> --- /dev/null
> +++ b/arch/arm/mach-omap2/gpmc-nand.c
> @@ -0,0 +1,137 @@
> +/*
> + * gpmc-nand.c
> + *
> + * Copyright (C) 2009 Texas Instruments
> + * Vimal Singh <vimalsingh at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +
> +#include <asm/mach/flash.h>
> +
> +#include <plat/nand.h>
> +#include <plat/board.h>
> +#include <plat/gpmc.h>
> +
> +#define WR_RD_PIN_MONITORING 0x00600000
> +#define MASKADDR 8
> +
> +static struct omap_nand_platform_data *gpmc_nand_data;
> +
> +static struct resource gpmc_nand_resource = {
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct platform_device gpmc_nand_device = {
> + .name = "omap2-nand",
> + .id = 0,
> + .num_resources = 1,
> + .resource = &gpmc_nand_resource,
> +};
> +
> +static int omap2_nand_gpmc_config(int cs, void __iomem *nand_base)
> +{
> + struct gpmc_timings t;
> + int err;
> +
> + const int cs_rd_off = 36;
> + const int cs_wr_off = 36;
> + const int adv_on = 6;
> + const int adv_rd_off = 24;
> + const int adv_wr_off = 36;
> + const int oe_off = 48;
> + const int we_off = 30;
> + const int rd_cycle = 72;
> + const int wr_cycle = 72;
> + const int access = 54;
> + const int wr_data_mux_bus = 0;
> + const int wr_access = 30;
> +
> + memset(&t, 0, sizeof(t));
> + t.sync_clk = 0;
> + t.cs_on = 0;
> + t.adv_on = gpmc_round_ns_to_ticks(adv_on);
> +
> + /* Read */
> + t.adv_rd_off = gpmc_round_ns_to_ticks(adv_rd_off);
> + t.oe_on = t.adv_on;
> + t.access = gpmc_round_ns_to_ticks(access);
> + t.oe_off = gpmc_round_ns_to_ticks(oe_off);
> + t.cs_rd_off = gpmc_round_ns_to_ticks(cs_rd_off);
> + t.rd_cycle = gpmc_round_ns_to_ticks(rd_cycle);
> +
> + /* Write */
> + t.adv_wr_off = gpmc_round_ns_to_ticks(adv_wr_off);
> + t.we_on = t.oe_on;
> + if (cpu_is_omap34xx()) {
> + t.wr_data_mux_bus = gpmc_round_ns_to_ticks(wr_data_mux_bus);
> + t.wr_access = gpmc_round_ns_to_ticks(wr_access);
> + }
> + t.we_off = gpmc_round_ns_to_ticks(we_off);
> + t.cs_wr_off = gpmc_round_ns_to_ticks(cs_wr_off);
> + t.wr_cycle = gpmc_round_ns_to_ticks(wr_cycle);
> +
> + /* Configure GPMC */
> + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
> + GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
> + GPMC_CONFIG1_DEVICETYPE_NAND);
> +
> + err = gpmc_cs_set_timings(cs, &t);
> + if (err)
> + return err;
> +
> + return 0;
> +}
> +
> +static int gpmc_nand_setup(void __iomem *nand_base)
> +{
> + struct device *dev = &gpmc_nand_device.dev;
> +
> + /* Set timings in GPMC */
> + if (omap2_nand_gpmc_config(gpmc_nand_data->cs, nand_base) < 0) {
> + dev_err(dev, "Unable to set gpmc timings\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
> +{
> + unsigned int val;
> + int err = 0;
> + struct device *dev = &gpmc_nand_device.dev;
> +
> + gpmc_nand_data = _nand_data;
> + gpmc_nand_data->nand_setup = gpmc_nand_setup;
> + gpmc_nand_device.dev.platform_data = gpmc_nand_data;
> +
> + err = gpmc_nand_setup(gpmc_nand_data->gpmc_cs_baseaddr);
> + if (err < 0) {
> + dev_err(dev, "NAND platform setup failed: %d\n", err);
> + return err;
> + }
> +
> + /* Enable RD PIN Monitoring Reg */
> + if (gpmc_nand_data->dev_ready) {
> + val = gpmc_cs_read_reg(gpmc_nand_data->cs,
> + GPMC_CS_CONFIG1);
> + val |= WR_RD_PIN_MONITORING;
> + gpmc_cs_write_reg(gpmc_nand_data->cs,
> + GPMC_CS_CONFIG1, val);
> + }
> +
> + err = platform_device_register(&gpmc_nand_device);
> + if (err < 0) {
> + dev_err(dev, "Unable to register NAND device\n");
> + return err;
> + }
> +
> + return 0;
> +}
> diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
> index 631a7be..2ba9842 100644
> --- a/arch/arm/plat-omap/include/plat/nand.h
> +++ b/arch/arm/plat-omap/include/plat/nand.h
> @@ -21,4 +21,10 @@ struct omap_nand_platform_data {
> int dma_channel;
> void __iomem *gpmc_cs_baseaddr;
> void __iomem *gpmc_baseaddr;
> + int devsize;
> };
> +
> +/* size (4 KiB) for IO mapping */
> +#define NAND_IO_SIZE SZ_4K
> +
> +extern int gpmc_nand_init(struct omap_nand_platform_data *d);
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index 1bb799f..aaef170 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -30,12 +30,8 @@
>
> #define DRIVER_NAME "omap2-nand"
>
> -/* size (4 KiB) for IO mapping */
> -#define NAND_IO_SIZE SZ_4K
> -
> #define NAND_WP_OFF 0
> #define NAND_WP_BIT 0x00000010
> -#define WR_RD_PIN_MONITORING 0x00600000
>
> #define GPMC_BUF_FULL 0x00000001
> #define GPMC_BUF_EMPTY 0x00000000
> @@ -882,8 +878,6 @@ static int __devinit omap_nand_probe
> struct omap_nand_info *info;
> struct omap_nand_platform_data *pdata;
> int err;
> - unsigned long val;
> -
>
> pdata = pdev->dev.platform_data;
> if (pdata == NULL) {
> @@ -910,24 +904,15 @@ static int __devinit omap_nand_probe
> info->mtd.name = dev_name(&pdev->dev);
> info->mtd.owner = THIS_MODULE;
>
> + info->nand.options |= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
> + info->nand.options |= NAND_SKIP_BBTSCAN;
> +
> err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base);
> if (err < 0) {
> dev_err(&pdev->dev, "Cannot request GPMC CS\n");
> goto out_free_info;
> }
>
> - /* Enable RD PIN Monitoring Reg */
> - if (pdata->dev_ready) {
> - val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
> - val |= WR_RD_PIN_MONITORING;
> - gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
> - }
> -
> - val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
> - val &= ~(0xf << 8);
> - val |= (0xc & 0xf) << 8;
> - gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
> -
> /* NAND write protect off */
> omap_nand_wp(&info->mtd, NAND_WP_OFF);
>
> @@ -963,11 +948,6 @@ static int __devinit omap_nand_probe
> info->nand.chip_delay = 50;
> }
>
> - info->nand.options |= NAND_SKIP_BBTSCAN;
> - if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
> - == 0x1000)
> - info->nand.options |= NAND_BUSWIDTH_16;
> -
> if (use_prefetch) {
> /* copy the virtual address of nand base for fifo access */
> info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
> --
> 1.5.5
More information about the linux-arm-kernel
mailing list