[PATCH 7/9] omap3: Board file of Always Innovating OMAP3-based Touch Book
Tony Lindgren
tony at atomide.com
Tue Dec 8 19:51:21 EST 2009
From: Gregoire Gentil <gregoire at gentil.com>
Board file of Always Innovating OMAP3-based Touch Book
Signed-off-by: Gregoire Gentil <gregoire at gentil.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/Kconfig | 5
arch/arm/mach-omap2/Makefile | 3
arch/arm/mach-omap2/board-omap3touchbook.c | 572 ++++++++++++++++++++++++++++
3 files changed, 579 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-omap3touchbook.c
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index afa184a..2ea50bf 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -90,6 +90,11 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3 && ARCH_OMAP34XX
select OMAP_PACKAGE_CBB
+config MACH_OMAP3_TOUCHBOOK
+ bool "OMAP3 Touch Book"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select BACKLIGHT_CLASS_DEVICE
+
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1cc1d26..0c5d886 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -99,7 +99,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
mmc-twl4030.o
-
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
new file mode 100644
index 0000000..c9e5ebb
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -0,0 +1,572 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+ *
+ * Copyright (C) 2009 Always Innovating
+ *
+ * Modified from mach-omap2/board-omap3beagleboard.c
+ *
+ * Initial code: Grégoire Gentil, Tim Yamin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <plat/mcspi.h>
+#include <linux/spi/spi.h>
+
+#include <linux/spi/ads7846.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#include <asm/setup.h>
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+#define OMAP3_AC_GPIO 136
+#define OMAP3_TS_GPIO 162
+#define TB_BL_PWM_TIMER 9
+#define TB_KILL_POWER_GPIO 168
+
+unsigned long touchbook_revision;
+
+static struct mtd_partition omap3touchbook_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data omap3touchbook_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = omap3touchbook_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
+};
+
+static struct resource omap3touchbook_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device omap3touchbook_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3touchbook_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3touchbook_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 8,
+ .gpio_wp = 29,
+ },
+ {} /* Terminator */
+};
+
+static struct platform_device omap3_touchbook_lcd_device = {
+ .name = "omap3touchbook_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply touchbook_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct gpio_led gpio_leds[];
+
+static int touchbook_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = 23;
+ } else {
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+ }
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ touchbook_vmmc1_supply.dev = mmc[0].dev;
+ touchbook_vsim_supply.dev = mmc[0].dev;
+
+ /* REVISIT: need ehci-omap hooks for external VBUS
+ * power switch and overcurrent detect
+ */
+
+ gpio_request(gpio + 1, "EHCI_nOC");
+ gpio_direction_input(gpio + 1);
+
+ /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data touchbook_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ | BIT(15) | BIT(16) | BIT(17),
+ .setup = touchbook_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply touchbook_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_touchbook_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply touchbook_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_touchbook_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data touchbook_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data touchbook_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data touchbook_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data touchbook_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vdvi_supply,
+};
+
+static struct twl4030_usb_data touchbook_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data touchbook_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data touchbook_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &touchbook_audio_data,
+};
+
+static struct twl4030_platform_data touchbook_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &touchbook_usb_data,
+ .gpio = &touchbook_gpio_data,
+ .codec = &touchbook_codec_data,
+ .vmmc1 = &touchbook_vmmc1,
+ .vsim = &touchbook_vsim,
+ .vdac = &touchbook_vdac,
+ .vpll2 = &touchbook_vpll2,
+};
+
+static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &touchbook_twldata,
+ },
+};
+
+static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("bq27200", 0x55),
+ },
+};
+
+static int __init omap3_touchbook_i2c_init(void)
+{
+ /* Standard TouchBook bus */
+ omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
+ ARRAY_SIZE(touchbook_i2c_boardinfo));
+
+ /* Additional TouchBook bus */
+ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
+ ARRAY_SIZE(touchBook_i2c_boardinfo));
+
+ return 0;
+}
+
+static void __init omap3_ads7846_init(void)
+{
+ if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
+ printk(KERN_ERR "Failed to request GPIO %d for "
+ "ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
+ return;
+ }
+
+ gpio_direction_input(OMAP3_TS_GPIO);
+ omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_min = 100,
+ .y_min = 265,
+ .x_max = 3950,
+ .y_max = 3750,
+ .x_plate_ohms = 40,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 5,
+ .debounce_rep = 1,
+ .gpio_pendown = OMAP3_TS_GPIO,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "touchbook::usr0",
+ .default_trigger = "heartbeat",
+ .gpio = 150,
+ },
+ {
+ .name = "touchbook::usr1",
+ .default_trigger = "mmc0",
+ .gpio = 149,
+ },
+ {
+ .name = "touchbook::pmu_stat",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 7,
+ .desc = "user",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = 183,
+ .desc = "power",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
+ { OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
+static void __init omap3_touchbook_init_irq(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_board_config = omap3_touchbook_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+static struct platform_device *omap3_touchbook_devices[] __initdata = {
+ &omap3_touchbook_lcd_device,
+ &leds_gpio,
+ &keys_gpio,
+};
+
+static void __init omap3touchbook_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ omap3touchbook_nand_data.cs = nandcs;
+ omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ omap3touchbook_nand_data.gpmc_baseaddr =
+ (void *) (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&omap3touchbook_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 147,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void omap3_touchbook_poweroff(void)
+{
+ int r;
+
+ r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
+ if (r < 0) {
+ printk(KERN_ERR "Unable to get kill power GPIO\n");
+ return;
+ }
+
+ gpio_direction_output(TB_KILL_POWER_GPIO, 0);
+}
+
+static void __init early_touchbook_revision(char **p)
+{
+ if (!*p)
+ return;
+
+ strict_strtoul(*p, 10, &touchbook_revision);
+}
+__early_param("tbr=", early_touchbook_revision);
+
+static void __init omap3_touchbook_init(void)
+{
+ pm_power_off = omap3_touchbook_poweroff;
+
+ omap3_touchbook_i2c_init();
+ platform_add_devices(omap3_touchbook_devices,
+ ARRAY_SIZE(omap3_touchbook_devices));
+ omap_serial_init();
+
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+ gpio_request(176, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(176, true);
+
+ /* Touchscreen and accelerometer */
+ spi_register_board_info(omap3_ads7846_spi_board_info,
+ ARRAY_SIZE(omap3_ads7846_spi_board_info));
+ omap3_ads7846_init();
+ usb_musb_init();
+ usb_ehci_init(&ehci_pdata);
+ omap3touchbook_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_touchbook_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
+ /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_touchbook_map_io,
+ .init_irq = omap3_touchbook_init_irq,
+ .init_machine = omap3_touchbook_init,
+ .timer = &omap_timer,
+MACHINE_END
More information about the linux-arm-kernel
mailing list