[PATCH 3/9] omap1: Use gen_nand
Tony Lindgren
tony at atomide.com
Tue Dec 8 19:50:31 EST 2009
From: Ladislav Michl <ladis at linux-mips.org>
Since omapnand driver never find its way into mainline, switch to gen_nand instead.
Following patch is compile tested only, but it is based on code I wrote for
NetStar board and runtime tested it there.
Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
Cc: Imre Deak <imre.deak at nokia.com>
Cc: Brian Swetland <swetland at google.com>
Cc: Kevin Hilman <kjh at hilman.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap1/board-fsample.c | 50 ++++++++++++++++++++++--------
arch/arm/mach-omap1/board-h2.c | 49 ++++++++++++++++++++++++------
arch/arm/mach-omap1/board-h3.c | 56 ++++++++++++++++++++++++----------
arch/arm/mach-omap1/board-perseus2.c | 48 ++++++++++++++++++++++-------
4 files changed, 152 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 91e7b2f..7e70c3c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -31,7 +31,6 @@
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
-#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -174,8 +173,40 @@ static struct platform_device nor_device = {
.resource = &nor_resource,
};
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define FSAMPLE_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+ },
};
static struct resource nand_resource = {
@@ -185,7 +216,7 @@ static struct resource nand_resource = {
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_data,
@@ -243,13 +274,6 @@ static struct platform_device *devices[] __initdata = {
&lcd_device,
};
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -260,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = {
static void __init omap_fsample_init(void)
{
- if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index eeafe6e..fa7cece 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/nand.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
@@ -180,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = {
},
};
-/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data h2_nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
- .parts = h2_nand_partitions,
- .nr_parts = ARRAY_SIZE(h2_nand_partitions),
+static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H2_NAND_RB_GPIO_PIN 62
+
+static int h2_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(H2_NAND_RB_GPIO_PIN);
+}
+
+static const char *h2_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data h2_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(h2_nand_partitions),
+ .partitions = h2_nand_partitions,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = h2_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = h2_nand_cmd_ctl,
+ .dev_ready = h2_nand_dev_ready,
+
+ },
};
static struct resource h2_nand_resource = {
@@ -192,10 +223,10 @@ static struct resource h2_nand_resource = {
};
static struct platform_device h2_nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
- .platform_data = &h2_nand_data,
+ .platform_data = &h2_nand_platdata,
},
.num_resources = 1,
.resource = &h2_nand_resource,
@@ -378,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
-#define H2_NAND_RB_GPIO_PIN 62
-
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index e0aee66..6a7f9c3 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -43,7 +43,6 @@
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
@@ -182,11 +181,43 @@ static struct mtd_partition nand_partitions[] = {
},
};
-/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
- .parts = nand_partitions,
- .nr_parts = ARRAY_SIZE(nand_partitions),
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H3_NAND_RB_GPIO_PIN 10
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(H3_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(nand_partitions),
+ .partitions = nand_partitions,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+
+ },
};
static struct resource nand_resource = {
@@ -194,10 +225,10 @@ static struct resource nand_resource = {
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
- .platform_data = &nand_data,
+ .platform_data = &nand_platdata,
},
.num_resources = 1,
.resource = &nand_resource,
@@ -342,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
},
};
-#define H3_NAND_RB_GPIO_PIN 10
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
static void __init h3_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
@@ -366,7 +390,7 @@ static void __init h3_init(void)
nand_resource.end += SZ_4K - 1;
if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(H3_NAND_RB_GPIO_PIN);
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index b9ea312..1387a4f 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -31,7 +31,6 @@
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
-#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -141,8 +140,40 @@ static struct platform_device nor_device = {
.resource = &nor_resource,
};
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define P2_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(P2_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+ },
};
static struct resource nand_resource = {
@@ -152,7 +183,7 @@ static struct resource nand_resource = {
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_data,
@@ -211,13 +242,6 @@ static struct platform_device *devices[] __initdata = {
&lcd_device,
};
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -230,7 +254,7 @@ static void __init omap_perseus2_init(void)
{
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(P2_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
More information about the linux-arm-kernel
mailing list