[PATCH 3/8] OMAP2/3: move SDRC macros to mach-omap2/sdrc.h

[Paul Walmsley]

clock34xx.c contains some macros which probably belong in mach-omap2/sdrc.h.
Move those macros to mach-omap2/sdrc.h.

Signed-off-by: Paul Walmsley <paul at pwsan.com
---
 arch/arm/mach-omap2/clock34xx.c |   14 --------------
 arch/arm/mach-omap2/sdrc.h      |   16 ++++++++++++++++
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index a4b903d..3929544 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -322,22 +322,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
-#define MIN_SDRC_DLL_LOCK_FREQ		83000000
-
 #define CYCLES_PER_MHZ			1000000
 
-/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
-#define SDRC_MPURATE_SCALE		8
-
-/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
-#define SDRC_MPURATE_BASE_SHIFT		9
-
-/*
- * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
- * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
- */
-#define SDRC_MPURATE_LOOPS		96
-
 /*
  * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
  * that are sourced by DPLL5, and both of these require this clock
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 48207b0..12fc7da 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -56,4 +56,20 @@ static inline u32 sms_read_reg(u16 reg)
 			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
+/* Minimum frequency that the SDRC DLL can lock at */
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE		8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT		9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS		96
+
+
 #endif