[PATCH 1/3] dt-bindings: thermal: amlogic: add the S4 CPU sensor

[christian.koever-draxl at student.uibk.ac.at]

From: Christian Stefan Kövér-Draxl <ckoever at outlook.de>

The S4 CPU temperature sensor is the G12A design, but like on T7 its
calibration value is only available through the secure monitor: the
ao-secure register used on G12A holds unrelated data on S4. Add a
compatible for it; it takes a single clock and the secure monitor
phandle with the sensor index.

Signed-off-by: Christian Stefan Kövér-Draxl <ckoever at outlook.de>
---
 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index e72cb39ac635..5d966ab4d820 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -23,6 +23,7 @@ properties:
           - const: amlogic,g12a-thermal
       - enum:
           - amlogic,a1-cpu-thermal
+          - amlogic,s4-cpu-thermal
           - amlogic,t7-thermal
 
   reg:
-- 
2.56.0