[PATCH v7 2/4] arm64: dts: amlogic: t7: Add thermal sensor nodes

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] thermal: amlogic: system hang due to MMIO access before clock enable
--

commit d943dedd550441fdf5ee6b1eb6eb97f02aac1ef7
Author: Ronald Claveau <linux-kernel-dev at aliel.fr>

arm64: dts: amlogic: t7: Add thermal sensor nodes

This commit adds six temperature sensor nodes to the device tree using
the amlogic,t7-thermal compatible. The nodes include references to their
required clocks and calibration data from the secure monitor.

> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index 8aa85aab30469..c81632d3984e8 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -696,6 +696,26 @@ sec_ao: ao-secure at 10220 {
>  				amlogic,has-chip-id;
>  			};
>  
> +			a73_tsensor: temperature-sensor at 20000 {
> +				compatible = "amlogic,t7-thermal";
> +				reg = <0x0 0x20000 0x0 0x50>;
> +				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clkc_periphs CLKID_SYS_TS_A73>, <&clkc_periphs CLKID_TS>;

[Severity: High]
Does adding this thermal sensor node expose an initialization order bug
in the driver that causes a system hang?

In drivers/thermal/amlogic_thermal.c:amlogic_thermal_probe(), the thermal
zone is registered before the hardware clocks are enabled:

	pdata->tzd = devm_thermal_of_zone_register(&pdev->dev,
						   0,
						   pdata,
						   &amlogic_thermal_ops);
	...
	ret = amlogic_thermal_enable(pdata);

During registration, the thermal core synchronously queries the temperature
via the driver's .get_temp callback (amlogic_thermal_get_temp()), which
performs an MMIO read via regmap_read() on TSENSOR_STAT0.

Since the driver enables the required peripheral clocks after the thermal
zone is registered, executing this MMIO read before the necessary bus clocks
are enabled will stall the AMBA bus and hang or reboot the system.

[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261016-add-thermal-t7-vim4-v7-0-6eede5450fd4@aliel.fr?part=2