[PATCH v2 2/2] arm64: dts: meson-gxbb-odroidc2: use color and function for the status LED

[Fil Dunsky via B4 Relay]

From: Fil Dunsky <filipp.dunsky at gmail.com>

Replace the legacy label on the blue status LED with the standard
color and function properties, following what the other Amlogic boards
already do.  The LED then shows up with a generic blue:status name
instead of the board-specific c2:blue:alive.

Signed-off-by: Fil Dunsky <filipp.dunsky at gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 3b74528ef..722dc906d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -9,6 +9,7 @@
 
 #include "meson-gxbb.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/meson-aiu.h>
 
 / {
@@ -51,7 +52,8 @@ usb_otg_pwr: regulator-usb-pwrs {
 	leds {
 		compatible = "gpio-leds";
 		led-blue {
-			label = "c2:blue:alive";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";

-- 
2.53.0