[PATCH 0/2] arm64: dts: meson-gxbb-odroidc2: eFuse MAC address and LED properties

[Fil Dunsky via B4 Relay]

Two small device-tree updates for the Hardkernel ODROID-C2, found while
adding OpenWrt support for the board.

Patch 1 wires the eth_mac eFuse nvmem cell (already described in
meson-gx.dtsi, but so far unused) to the Ethernet controller, so the
kernel reads the factory MAC address itself instead of relying on the
bootloader or a random fallback.

Patch 2 converts the blue status LED to the standard color/function
properties.

Both verified on ODROID-C2 hardware and rechecked against this tree
with CHECK_DTBS=y W=1.

Signed-off-by: Fil Dunsky <filipp.dunsky at gmail.com>
---
Fil Dunsky (2):
      arm64: dts: meson-gxbb-odroidc2: read the Ethernet MAC address from eFuse
      arm64: dts: meson-gxbb-odroidc2: use color and function for the status LED

 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
---
base-commit: a5ebb76233b79db01e82e061173cb73c6d2b5c6b
change-id: 20261011-odroidc2-dts-53a0b62433c1

Best regards,
--  
Fil Dunsky <filipp.dunsky at gmail.com>