[PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support
Lucas Tanure
tanure at linux.com
Sun Oct 4 07:06:43 PDT 2026
On 24/09/2026 18:21, Conor Dooley wrote:
> On Thu, Sep 24, 2026 at 05:51:09AM +0000, Xianwei Zhao via B4 Relay wrote:
>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>
>> Add the T7 compatible to the Meson DWMAC binding.
>>
>> The T7 DWMAC controller requires the following compatible combination:
>>
>> amlogic,t7-dwmac
>> amlogic,meson-axg-dwmac
>> snps,dwmac-4.00
>>
>> Add a conditional schema check to enforce this compatible combination
>> when amlogic,t7-dwmac is used.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> ---
>> .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> index 5c91716d1f21..b529ca5577a9 100644
>> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> @@ -23,11 +23,24 @@ select:
>> - amlogic,meson-gxbb-dwmac
>> - amlogic,meson-axg-dwmac
>> - amlogic,meson-g12a-dwmac
>> + - amlogic,t7-dwmac
>> required:
>> - compatible
>>
>> allOf:
>> - $ref: snps,dwmac.yaml#
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: amlogic,t7-dwmac
>> + then:
>> + properties:
>> + compatible:
>> + items:
>> + - const: amlogic,t7-dwmac
>> + - const: amlogic,meson-axg-dwmac
>> + - const: snps,dwmac-4.00
>
> This is not how fallback compatibles are described.
>
> Instead of doing this, which affects all other compatibles in the file
> by allowing dwmac-4.00 for all devices, please do this the normal way.
> dwmac isn't special, it's just this binding that's weird!
> Can whats currently in the binding (before this patch) be largely
> replaced by just doing:
> compatible:
> oneOf:
> - items:
> - enum:
> - amlogic,meson8b-dwmac
> - amlogic,meson-gxbb-dwmac
> - amlogic,meson-axg-dwmac
> - amlogic,meson-g12a-dwmac
> - const: snps,dwmac-3.70a
> - const: snps,dwmac
> - items:
> - enum:
> - amlogic,meson6-dwmac
> - amlogic,meson8m2-dwmac
> - const: snps,dwmac
>
> You'll have to check this yourself against the amlogic devicetrees and
> see if this is correct, but with this you should be able to add your new
> device without doing anything special.
I have the same patch in my T7 work and checked it against the amlogic
device trees: meson6 and meson8m2 use the two entry form, the rest add
snps,dwmac-3.70a. dt_binding_check and dtbs_check are clean. The example
needs fixing.
Xianwei, from my VIM4: the MAC reports Synopsys ID 0x51, DWMAC_CORE_5_10
in common.h, so the core is 5.10a, not 4.00. And the controller reaches
DRAM through a pipeline stage. Nothing claims its gate, sys_ampipe_eth,
so clk_disable_unused switches it off. My node lists it as a fourth
clock. Does the AN400 differ?
I will send my series today so the code is on the list. Not a race: I
will drop or rebase whatever overlaps once you tell me.
Thanks,
Lucas
>
> pw-bot: changes-requested
>
> Thanks,
> Conor.
>
>> - if:
>> properties:
>> compatible:
>> @@ -38,6 +51,7 @@ allOf:
>> - amlogic,meson-gxbb-dwmac
>> - amlogic,meson-axg-dwmac
>> - amlogic,meson-g12a-dwmac
>> + - amlogic,t7-dwmac
>>
>> then:
>> properties:
>> @@ -93,6 +107,7 @@ allOf:
>> - amlogic,meson8m2-dwmac
>> - amlogic,meson-gxbb-dwmac
>> - amlogic,meson-axg-dwmac
>> + - amlogic,t7-dwmac
>> then:
>> properties:
>> rx-internal-delay-ps:
>> @@ -139,8 +154,10 @@ properties:
>> - amlogic,meson-gxbb-dwmac
>> - amlogic,meson-axg-dwmac
>> - amlogic,meson-g12a-dwmac
>> + - amlogic,t7-dwmac
>> contains:
>> enum:
>> + - snps,dwmac-4.00
>> - snps,dwmac-3.70a
>> - snps,dwmac
>>
>>
>> --
>> 2.52.0
>>
>>
More information about the linux-amlogic
mailing list