[PATCH 5/6] drm/exynos: hdmi: convert to of_drm_find_and_get_bridge()

[Luca Ceresoli]

Hi Maxime,

On Thu Jan 8, 2026 at 9:14 AM CET, Maxime Ripard wrote:
> On Wed, Jan 07, 2026 at 05:22:03PM +0100, Luca Ceresoli wrote:
>> of_drm_find_bridge() is deprecated. Move to its replacement
>> of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
>> is put when done.
>>
>> Signed-off-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
>
> Why can't we use next_bridge for this one?

Because this device is not a bridge, so we have no struct drm_bridge.

>> ---
>>  drivers/gpu/drm/exynos/exynos_hdmi.c | 4 +++-
>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index 01813e11e6c6..bfcf2fa62fe1 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -1779,7 +1779,7 @@ static int hdmi_bridge_init(struct hdmi_context *hdata)
>>  		return -EINVAL;
>>  	}
>>
>> -	hdata->bridge = of_drm_find_bridge(np);
>> +	hdata->bridge = of_drm_find_and_get_bridge(np);
>>  	of_node_put(np);
>>
>>  	if (!hdata->bridge)
>> @@ -2096,6 +2096,8 @@ static void hdmi_remove(struct platform_device *pdev)
>>
>>  	put_device(&hdata->ddc_adpt->dev);
>>
>> +	drm_bridge_put(hdata->bridge);
>> +
>>  	mutex_destroy(&hdata->mutex);
>>  }
>
> Same story than in your part 2 series, it should be dropped in destroy.

hdata->bridge is only used for drm_bridge_attach(), it won't be referenced
after that. So this is safe, unless I'm missing something.

Also as we don't have a struct drm_bridge (as mentioned above) we have no
bridge destroy. We have the encoder destroy, but that will never be called
on bridge hotplug.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com