[PATCH v1 2/3] clk: meson: g12a: Limit the HDMI PLL OD to /4

[Martin Blumenstingl]

GXBB has the HDMI PLL OD in the HHI_HDMI_PLL_CNTL2 register while for
G12A/G12B/SM1 the OD has moved to HHI_HDMI_PLL_CNTL0. At first glance
the rest of the OD setup seems identical.

However, looking at the downstream kernel sources as well as testing
shows that G12A/G12B/SM1 only supports three OD values:
- register value 0 means: divide by 1
- register value 1 means: divide by 2
- register value 2 means: divide by 4

Downstream sources are also only using OD register values 0, 1 and 2
for G12A/G12B/SM1 (while for GXBB the downstream kernel sources are also
using value 3 which means: divide by 8).

Add clk_div_table and have it replace the CLK_DIVIDER_POWER_OF_TWO flag
to make the kernel's view of this register match with how the hardware
actually works.

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 drivers/clk/meson/g12a.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 185b6348251d..19057d2dff47 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -777,12 +777,19 @@ static struct clk_regmap g12a_hdmi_pll_dco = {
 	},
 };
 
+static const struct clk_div_table g12a_hdmi_pll_od_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ /* sentinel */ }
+};
+
 static struct clk_regmap g12a_hdmi_pll_od = {
 	.data = &(struct clk_regmap_div_data){
 		.offset = HHI_HDMI_PLL_CNTL0,
 		.shift = 16,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = g12a_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll_od",
@@ -800,7 +807,7 @@ static struct clk_regmap g12a_hdmi_pll_od2 = {
 		.offset = HHI_HDMI_PLL_CNTL0,
 		.shift = 18,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = g12a_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll_od2",
@@ -818,7 +825,7 @@ static struct clk_regmap g12a_hdmi_pll = {
 		.offset = HHI_HDMI_PLL_CNTL0,
 		.shift = 20,
 		.width = 2,
-		.flags = CLK_DIVIDER_POWER_OF_TWO,
+		.table = g12a_hdmi_pll_od_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "hdmi_pll",
-- 
2.52.0