[PATCH] pinctrl: meson: mark the GPIO controller as sleeping

Neil Armstrong neil.armstrong at linaro.org
Mon Jan 5 07:07:54 PST 2026


On 1/5/26 16:05, Bartosz Golaszewski wrote:
> The GPIO controller is configured as non-sleeping but it uses generic
> pinctrl helpers which use a mutex for synchronization.
> 
> This can cause the following lockdep splat with shared GPIOs enabled on
> boards which have multiple devices using the same GPIO:
> 
> BUG: sleeping function called from invalid context at
> kernel/locking/mutex.c:591
> in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 142, name:
> kworker/u25:3
> preempt_count: 1, expected: 0
> RCU nest depth: 0, expected: 0
> INFO: lockdep is turned off.
> irq event stamp: 46379
> hardirqs last  enabled at (46379): [<ffff8000813acb24>]
> _raw_spin_unlock_irqrestore+0x74/0x78
> hardirqs last disabled at (46378): [<ffff8000813abf38>]
> _raw_spin_lock_irqsave+0x84/0x88
> softirqs last  enabled at (46330): [<ffff8000800c71b4>]
> handle_softirqs+0x4c4/0x4dc
> softirqs last disabled at (46295): [<ffff800080010674>]
> __do_softirq+0x14/0x20
> CPU: 1 UID: 0 PID: 142 Comm: kworker/u25:3 Tainted: G C
> 6.19.0-rc4-next-20260105+ #11963 PREEMPT
> Tainted: [C]=CRAP
> Hardware name: Khadas VIM3 (DT)
> Workqueue: events_unbound deferred_probe_work_func
> Call trace:
>    show_stack+0x18/0x24 (C)
>    dump_stack_lvl+0x90/0xd0
>    dump_stack+0x18/0x24
>    __might_resched+0x144/0x248
>    __might_sleep+0x48/0x98
>    __mutex_lock+0x5c/0x894
>    mutex_lock_nested+0x24/0x30
>    pinctrl_get_device_gpio_range+0x44/0x128
>    pinctrl_gpio_set_config+0x40/0xdc
>    gpiochip_generic_config+0x28/0x3c
>    gpio_do_set_config+0xa8/0x194
>    gpiod_set_config+0x34/0xfc
>    gpio_shared_proxy_set_config+0x6c/0xfc [gpio_shared_proxy]
>    gpio_do_set_config+0xa8/0x194
>    gpiod_set_transitory+0x4c/0xf0
>    gpiod_configure_flags+0xa4/0x480
>    gpiod_find_and_request+0x1a0/0x574
>    gpiod_get_index+0x58/0x84
>    devm_gpiod_get_index+0x20/0xb4
>    devm_gpiod_get+0x18/0x24
>    mmc_pwrseq_emmc_probe+0x40/0xb8
>    platform_probe+0x5c/0xac
>    really_probe+0xbc/0x298
>    __driver_probe_device+0x78/0x12c
>    driver_probe_device+0xdc/0x164
>    __device_attach_driver+0xb8/0x138
>    bus_for_each_drv+0x80/0xdc
>    __device_attach+0xa8/0x1b0
> 
> Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
> Cc: stable at vger.kernel.org
> Reported-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
> ---
>   drivers/pinctrl/meson/pinctrl-meson.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
> index 18295b15ecd9..4507dc8b5563 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
> @@ -619,7 +619,7 @@ static int meson_gpiolib_register(struct meson_pinctrl *pc)
>   	pc->chip.set = meson_gpio_set;
>   	pc->chip.base = -1;
>   	pc->chip.ngpio = pc->data->num_pins;
> -	pc->chip.can_sleep = false;
> +	pc->chip.can_sleep = true;
>   
>   	ret = gpiochip_add_data(&pc->chip, pc);
>   	if (ret) {

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil



More information about the linux-amlogic mailing list