[PATCH RESEND] dts: arm64: amlogic: Add ISP related nodes for C3

[Neil Armstrong]

On 18/09/2025 10:35, Keke Li via B4 Relay wrote:
> From: Keke Li <keke.li at amlogic.com>
> 
> Add the IMX290 sensor node description to the device tree file,
> which will be controlled via I2C bus with image data transmission
> through MIPI CSI-2 interface.
> 
> Add CSI-2, adapter and ISP nodes for C3 family.
> 
> Signed-off-by: Keke Li <keke.li at amlogic.com>
> ---
> The C3 ISP driver and device-tree bindings have been
> submitted. To facilitate using the C3 ISP driver, the
> related device nodes need to be added.

No need to resend until the bindings are merged.

Neil

> ---
>   .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts    | 84 +++++++++++++++++++++
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi        | 88 ++++++++++++++++++++++
>   2 files changed, 172 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
> index 45f8631f9feb..e026604c55e6 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
> @@ -17,6 +17,7 @@ / {
>   	aliases {
>   		serial0 = &uart_b;
>   		spi0 = &spifc;
> +		i2c2 = &i2c2;
>   	};
>   
>   	memory at 0 {
> @@ -146,6 +147,36 @@ sdcard: regulator-sdcard {
>   		regulator-boot-on;
>   		regulator-always-on;
>   	};
> +
> +	camera_vdddo_1v8: regulator-camera-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "CAMERA_VDDDO";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc_3v3>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	camera_vdda_2v9: regulator-camera-2v9 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "CAMERA_VDDA";
> +		regulator-min-microvolt = <2900000>;
> +		regulator-max-microvolt = <2900000>;
> +		vin-supply = <&vcc_5v>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	camera_vddd_1v2: regulator-camera-1v2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "CAMERA_VDDD";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +		vin-supply = <&vcc_3v3>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>   };
>   
>   &uart_b {
> @@ -258,3 +289,56 @@ &sd {
>   	vmmc-supply = <&sdcard>;
>   	vqmmc-supply = <&sdcard>;
>   };
> +
> +&i2c2 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins1>;
> +	clock-frequency = <100000>; /* default 100k */
> +
> +	imx290: sensor0 at 1a {
> +		compatible = "sony,imx290";
> +		reg = <0x1a>;
> +		clocks = <&clkc_pll CLKID_MCLK0>;
> +		clock-names = "xclk";
> +		clock-frequency = <37125000>;
> +		assigned-clocks = <&clkc_pll CLKID_MCLK_PLL>,
> +				  <&clkc_pll CLKID_MCLK0>;
> +		assigned-clock-rates = <74250000>, <37125000>;
> +
> +		vdddo-supply = <&camera_vdddo_1v8>;
> +		vdda-supply = <&camera_vdda_2v9>;
> +		vddd-supply = <&camera_vddd_1v2>;
> +
> +		reset-gpios = <&gpio GPIOE_4 GPIO_ACTIVE_LOW>;
> +
> +		port {
> +			imx290_out: endpoint {
> +				data-lanes = <1 2 3 4>;
> +				link-frequencies = /bits/ 64 <222750000 148500000>;
> +				remote-endpoint = <&c3_mipi_csi_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&csi2 {
> +	status = "okay";
> +
> +	ports {
> +		port at 0 {
> +			c3_mipi_csi_in: endpoint {
> +				remote-endpoint = <&imx290_out>;
> +				data-lanes = <1 2 3 4>;
> +			};
> +		};
> +	};
> +};
> +
> +&adap {
> +	status = "okay";
> +};
> +
> +&isp {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index cb9ea3ca6ee0..a62fd8534209 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -992,5 +992,93 @@ mdio0: mdio {
>   				#size-cells = <0>;
>   			};
>   		};
> +
> +		csi2: csi2 at ff018000 {
> +			compatible = "amlogic,c3-mipi-csi2";
> +			reg = <0x0 0xff018000 0x0 0x100>,
> +			      <0x0 0xff019000 0x0 0x300>,
> +			      <0x0 0xff01a000 0x0 0x100>;
> +			reg-names = "aphy", "dphy", "host";
> +			power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>;
> +			clocks = <&clkc_periphs CLKID_VAPB>,
> +				 <&clkc_periphs CLKID_CSI_PHY0>;
> +			clock-names = "vapb", "phy0";
> +			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
> +					  <&clkc_periphs CLKID_CSI_PHY0>;
> +			assigned-clock-rates = <0>, <200000000>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					c3_mipi_csi_out: endpoint {
> +						remote-endpoint = <&c3_adap_in>;
> +					};
> +				};
> +			};
> +		};
> +
> +		adap: adap at ff010000 {
> +			compatible = "amlogic,c3-mipi-adapter";
> +			reg = <0x0 0xff010000 0x0 0x100>,
> +			      <0x0 0xff01b000 0x0 0x100>,
> +			      <0x0 0xff01d000 0x0 0x200>;
> +			reg-names = "top", "fd", "rd";
> +			power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
> +			clocks = <&clkc_periphs CLKID_VAPB>,
> +				 <&clkc_periphs CLKID_ISP0>;
> +			clock-names = "vapb", "isp0";
> +			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
> +					  <&clkc_periphs CLKID_ISP0>;
> +			assigned-clock-rates = <0>, <400000000>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					c3_adap_in: endpoint {
> +						remote-endpoint = <&c3_mipi_csi_out>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					c3_adap_out: endpoint {
> +						remote-endpoint = <&c3_isp_in>;
> +					};
> +				};
> +			};
> +		};
> +
> +		isp: isp at ff000000 {
> +			compatible = "amlogic,c3-isp";
> +			reg = <0x0 0xff000000 0x0 0xf000>;
> +			reg-names = "isp";
> +			power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
> +			clocks = <&clkc_periphs CLKID_VAPB>,
> +				 <&clkc_periphs CLKID_ISP0>;
> +			clock-names = "vapb", "isp0";
> +			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
> +					  <&clkc_periphs CLKID_ISP0>;
> +			assigned-clock-rates = <0>, <400000000>;
> +			interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>;
> +			status = "disabled";
> +
> +			port {
> +				c3_isp_in: endpoint {
> +					remote-endpoint = <&c3_adap_out>;
> +				};
> +			};
> +		};
>   	};
>   };
> 
> ---
> base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
> change-id: 20250731-b4-c3isp-16531391a1cb
> 
> Best regards,