[PATCH RFC v2 0/3] Add Amlogic stateless H.264 video decoder for S4

[Zhentao Guo]

在 2025/11/25 18:55, Ferass El Hafidi 写道:
> [ EXTERNAL EMAIL ]
>
> Hello, quick drive-by comments:
>
> On Mon, 24 Nov 2025 03:32, Zhentao Guo via B4 Relay 
> <devnull+zhentao.guo.amlogic.com at kernel.org> wrote:
>> Introduce initial driver support for Amlogic's new video acceleration
>> hardware architecture, designed for video stream decoding.
>>
>> Compared to the current Amlogic video decoder hardware architecture,
>> this new implementation eliminates the Esparser hardware component,
>> enabling direct vb2 buffer input. The driver is designed to support
>> the V4L2 M2M stateless decoder API. The initial phase includes support
>> for H.264 decoding on Amlogic S805X2 platform.
>>
>> The driver is capable of:
>> - Supporting stateless H.264 decoding up to a resolution 1920x1088(on 
>> the S805X2 platform).
>
> nit: 1920x1080?
The hardware requires the height to be aligned to 16 pixels, so 1080 is 
not a multiple of 16, but 1088 is. Therefore, the hardware actually 
supports 1920x1088 for decoding, which covers 1920x1080 by padding the 
height to 1088.
>
>> - Supporting I/P/B frame handling.
>> - Supporting vb2 mmap and dma-buf modes.
>> - Supporting frame-based decode mode. (Note that some H.264 
>> bitstreams require
>>  DPB reordering to generate reference lists, the stateless decoder 
>> driver
>>  cannot access reordered reference lists in this mode, requiring the 
>> driver
>>  to perform reference list reordering itself)
>> - Supporting NV12/NV21 output.
>> - Supporting Annex B start codes.
>
> Best regards,
> Ferass

BRs

Zhentao