[PATCH 5/5] arm64: dts: Add gpio_intc node for Amlogic S7D SoCs

[Neil Armstrong]

On 11/5/25 10:45, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
> 
> Add GPIO interrupt controller device.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
> index f1c2e91ec6c5..74f98fae7dac 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
> @@ -194,6 +194,16 @@ gpiocc: gpio at 300 {
>   					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
>   				};
>   			};
> +
> +			gpio_intc: interrupt-controller at 4080 {
> +				compatible = "amlogic,s7d-gpio-intc",
> +					     "amlogic,meson-gpio-intc";
> +				reg = <0x0 0x4080 0x0 0x20>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				amlogic,channel-interrupts =
> +					<10 11 12 13 14 15 16 17 18 19 20 21>;
> +			};
>   		};
>   	};
>   };
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>