[PATCH v2] drm/meson: Use 1000ULL when operating with mode->clock

neil.armstrong at linaro.org neil.armstrong at linaro.org
Fri May 9 08:35:35 PDT 2025


On 05/05/2025 20:43, I Hsin Cheng wrote:
> Coverity scan reported the usage of "mode->clock * 1000" may lead to
> integer overflow. Use "1000ULL" instead of "1000"
> when utilizing it to avoid potential integer overflow issue.
> 
> Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
> Signed-off-by: I Hsin Cheng <richard120310 at gmail.com>

Could you add a Fixes tag ?

Thanks,
Neil

> ---
> Changelog:
> 
> v1 -> v2:
> 	- Use 1000ULL instead of casting the type of "mode->clock"
> 	- Refine commit title and message
> 	- Fix the issue for the evaluation inside drm_mode_status
> 	  meson_encoder_hdmi_mode_valid() as well
> 
> Christophe,
> Thanks for your review and your suggestion, I think I should add a tag
> for you,too, but I'm not sure what should I add, if you would be so kind
> please let me know how should I tag you in the patch.
> 
> Best regards,
> I Hsin Cheng
> ---
>   drivers/gpu/drm/meson/meson_encoder_hdmi.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> index 7752d8ac85f0..c08fa93e50a3 100644
> --- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
> @@ -75,7 +75,7 @@ static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi,
>   	unsigned long long venc_freq;
>   	unsigned long long hdmi_freq;
>   
> -	vclk_freq = mode->clock * 1000;
> +	vclk_freq = mode->clock * 1000ULL;
>   
>   	/* For 420, pixel clock is half unlike venc clock */
>   	if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
> @@ -123,7 +123,7 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bri
>   	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
>   	struct meson_drm *priv = encoder_hdmi->priv;
>   	bool is_hdmi2_sink = display_info->hdmi.scdc.supported;
> -	unsigned long long clock = mode->clock * 1000;
> +	unsigned long long clock = mode->clock * 1000ULL;
>   	unsigned long long phy_freq;
>   	unsigned long long vclk_freq;
>   	unsigned long long venc_freq;




More information about the linux-amlogic mailing list