June 2025 Archives by date
Starting: Sun Jun 1 04:11:16 PDT 2025
Ending: Mon Jun 30 03:00:16 PDT 2025
Messages: 140
- [PATCH] arm64: dts: Add no-hpd property for all ti-sn65dsi86 bridge consumers
Krzysztof Kozlowski
- [PATCH v4 0/4] Use helper function for_each_child_of_node_scoped()
Ai Chao
- [PATCH v4 1/4] ALSA: ppc: Use helper function for_each_child_of_node_scoped()
Ai Chao
- [PATCH v4 2/4] ASoC: renesas: Use helper function for_each_child_of_node_scoped()
Ai Chao
- [PATCH v4 3/4] ASoC: meson: Use helper function for_each_child_of_node_scoped()
Ai Chao
- [PATCH v4 4/4] ASoC: imx-card: Use helper function for_each_child_of_node_scoped()
Ai Chao
- [PATCH] arm64: dts: amlogic: meson-gxm-rbox-pro: fix wifi node name
Neil Armstrong
- [PATCH] arm64: dts: amlogic: meson-gxm-rbox-pro: fix wifi node name
Krzysztof Kozlowski
- [PATCH 0/5] dt-bindings: mailbox: Few cleanups
Krzysztof Kozlowski
- [PATCH 1/5] dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
Krzysztof Kozlowski
- [PATCH 2/5] dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
Krzysztof Kozlowski
- [PATCH 3/5] dt-bindings: mailbox: Correct example indentation
Krzysztof Kozlowski
- [PATCH 4/5] dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
Krzysztof Kozlowski
- [PATCH 5/5] dt-bindings: mailbox: Drop consumers example DTS
Krzysztof Kozlowski
- [PATCH v3 11/36] mmc: meson-mx-sdhc: Use devm_mmc_alloc_host() helper
Binbin Zhou
- [PATCH v3 36/36] mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
Binbin Zhou
- [PATCH] arm64: dts: amlogic: meson-gxm-rbox-pro: fix wifi node name
Neil Armstrong
- [PATCH] arm64: dts: amlogic: Align wifi node name with bindings
Neil Armstrong
- [PATCH 2/5] dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
Nishanth Menon
- [PATCH 3/5] dt-bindings: mailbox: Correct example indentation
Nishanth Menon
- [PATCH 5/5] dt-bindings: mailbox: Drop consumers example DTS
Nishanth Menon
- [PATCH 1/5] dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
Martin Blumenstingl
- [PATCH v3 11/36] mmc: meson-mx-sdhc: Use devm_mmc_alloc_host() helper
Martin Blumenstingl
- [PATCH v3 36/36] mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
Martin Blumenstingl
- [PATCH v3 36/36] mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
Martin Blumenstingl
- [PATCH v3 36/36] mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
Binbin Zhou
- [PATCH 0/3] support for amlogic the new SPI IP
Xianwei Zhao via B4 Relay
- [PATCH 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Xianwei Zhao via B4 Relay
- [PATCH 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao via B4 Relay
- [PATCH 3/3] MAINTAINERS: Add an entry for Amlogic spi driver
Xianwei Zhao via B4 Relay
- [PATCH v3 36/36] mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
Martin Blumenstingl
- [PATCH 2/3] spi: Add Amlogic SPISG driver
kernel test robot
- [PATCH 3/5] dt-bindings: mailbox: Correct example indentation
Sven Peter
- [PATCH] drm/meson: fix debug log statement when setting the HDMI clocks
Martin Blumenstingl
- [PATCH] drm/meson: use vclk_freq instead of pixel_freq in debug print
Martin Blumenstingl
- [PATCH v4 3/8] drm/bridge: ti-sn65dsi86: use the auxiliary device
Jerome Brunet
- [PATCH v4 3/8] drm/bridge: ti-sn65dsi86: use the auxiliary device
Doug Anderson
- [PATCH] drm/meson: fix debug log statement when setting the HDMI clocks
neil.armstrong at linaro.org
- [PATCH] drm/meson: use vclk_freq instead of pixel_freq in debug print
neil.armstrong at linaro.org
- [PATCH v1] drm/meson: fix more rounding issues with 59.94Hz modes
Martin Blumenstingl
- (subset) [PATCH v4 0/4] Use helper function for_each_child_of_node_scoped()
Mark Brown
- [PATCH 4/5] dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
Thierry Reding
- [PATCH v3 0/6] Add support for Amlogic S7/S7D/S6 pinctrl
Linus Walleij
- [PATCH v1] drm/meson: fix more rounding issues with 59.94Hz modes
neil.armstrong at linaro.org
- [PATCH] drm/meson: fix debug log statement when setting the HDMI clocks
Neil Armstrong
- [PATCH] drm/meson: use vclk_freq instead of pixel_freq in debug print
Neil Armstrong
- [PATCH v1] drm/meson: fix more rounding issues with 59.94Hz modes
Neil Armstrong
- [PATCH 2/3] spi: Add Amlogic SPISG driver
neil.armstrong at linaro.org
- [PATCH 0/4] clk: use the auxiliary device creation helper
Jerome Brunet
- [PATCH 1/4] clk: eyeq: use the auxiliary device creation helper
Jerome Brunet
- [PATCH 2/4] reset: eyeq: drop device_set_of_node_from_dev() done by parent
Jerome Brunet
- [PATCH 3/4] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper
Jerome Brunet
- [PATCH 4/4] clk: amlogic: axg-audio: use the auxiliary reset driver
Jerome Brunet
- [PATCH 3/4] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper
Frank Li
- [PATCH] i2c: use inclusive callbacks in struct i2c_algorithm
Wolfram Sang
- [PATCH 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao
- [PATCH v3 4/6] clk: meson: t7: add support for the T7 SoC PLL clock
Jian Hu
- [PATCH v4 1/2] PCI: Configure root port MPS during host probing
Manivannan Sadhasivam
- [PATCH v4 2/2] PCI: dwc: Remove redundant MPS configuration
Manivannan Sadhasivam
- Proszę o kontakt
Adrian Liszka
- [PATCH v3 6/6] clk: meson: t7: add t7 clock peripherals controller driver
Jian Hu
- [PATCH v4 1/2] PCI: Configure root port MPS during host probing
Niklas Cassel
- [PATCH v3 0/2] arm64: Device Tree for Ugoos AM3 board
J. Neuschäfer via B4 Relay
- [PATCH v3 1/2] dt-bindings: arm: amlogic: Add Ugoos AM3
J. Neuschäfer via B4 Relay
- [PATCH v3 2/2] arm64: dts: amlogic: Add Ugoos AM3
J. Neuschäfer via B4 Relay
- [PATCH v4 1/2] PCI: Configure root port MPS during host probing
Hans Zhang
- [PATCH v4 2/2] PCI: dwc: Remove redundant MPS configuration
Hans Zhang
- [PATCH v3 4/6] clk: meson: t7: add support for the T7 SoC PLL clock
Jerome Brunet
- [PATCH v3 5/6] clk: meson: add MESON_PCLK_V2 for sys gate clock
Jerome Brunet
- [PATCH v4 3/8] drm/bridge: ti-sn65dsi86: use the auxiliary device
Doug Anderson
- [PATCH v2 0/3] support for amlogic the new SPI IP
Xianwei Zhao via B4 Relay
- [PATCH v2 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Xianwei Zhao via B4 Relay
- [PATCH v2 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao via B4 Relay
- [PATCH v2 3/3] MAINTAINERS: Add an entry for Amlogic spi driver
Xianwei Zhao via B4 Relay
- [PATCH v2 2/3] spi: Add Amlogic SPISG driver
neil.armstrong at linaro.org
- [PATCH v2 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Conor Dooley
- [PATCH] pinctrl: meson-g12a: add g12b pwm groups
Da Xue
- [PATCH v4 1/2] PCI: Configure root port MPS during host probing
Manivannan Sadhasivam
- [PATCH 2/5] clk: nuvoton: Do not enable by default during compile testing
Stephen Boyd
- [PATCH 3/5] clk: stm32: Do not enable by default during compile testing
Stephen Boyd
- [PATCH v3 5/6] clk: meson: add MESON_PCLK_V2 for sys gate clock
Jian Hu
- [PATCH v2 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao
- [PATCH v5 0/2] Configure root port MPS during host probing
Hans Zhang
- [PATCH v5 1/2] PCI: Configure root port MPS during host probing
Hans Zhang
- [PATCH v5 2/2] PCI: dwc: Remove redundant MPS configuration
Hans Zhang
- [PATCH v5 0/2] Configure root port MPS during host probing
Hans Zhang
- [PATCH] pinctrl: meson-g12a: add g12b pwm groups
Neil Armstrong
- [PATCH v3 0/3] support for amlogic the new SPI IP
Xianwei Zhao via B4 Relay
- [PATCH v3 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Xianwei Zhao via B4 Relay
- [PATCH v3 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao via B4 Relay
- [PATCH v3 3/3] MAINTAINERS: Add an entry for Amlogic spi driver
Xianwei Zhao via B4 Relay
- [PATCH v5 0/2] Configure root port MPS during host probing
Niklas Cassel
- [PATCH 3/4] clk: clk-imx8mp-audiomix: use the auxiliary device creation helper
Jerome Brunet
- [PATCH v3 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Krzysztof Kozlowski
- [PATCH v3 2/3] spi: Add Amlogic SPISG driver
Krzysztof Kozlowski
- [PATCH v5 1/2] PCI: Configure root port MPS during host probing
Manivannan Sadhasivam
- (subset) [PATCH 0/4] clk: use the auxiliary device creation helper
Jerome Brunet
- [PATCH] clk: amlogic: remove unnecessary headers
Jerome Brunet
- [PATCH v4 0/3] clk: amlogic: drop clk_regmap tables
Jerome Brunet
- [PATCH v4 1/3] clk: amlogic: get regmap with clk_regmap_init
Jerome Brunet
- [PATCH v4 2/3] clk: amlogic: drop clk_regmap tables
Jerome Brunet
- [PATCH v4 3/3] clk: amlogic: s4: remove unused data
Jerome Brunet
- [PATCH v3 1/3] dt-bindings: spi: Add binding document of Amlogic SPISG controller
Xianwei Zhao
- [PATCH v3 2/3] spi: Add Amlogic SPISG driver
Xianwei Zhao
- [PATCH v12 00/22] Support more Amlogic SoC families in crypto driver
Alexey Romanov
- [PATCH v12 01/22] crypto: amlogic - Don't hardcode IRQ count
Alexey Romanov
- [PATCH v12 02/22] crypto: amlogic - Add platform data
Alexey Romanov
- [PATCH v12 03/22] crypto: amlogic - Remove clock input
Alexey Romanov
- [PATCH v12 04/22] crypto: amlogic - Add MMIO helpers
Alexey Romanov
- [PATCH v12 05/22] crypto: amlogic - Move get_engine_number()
Alexey Romanov
- [PATCH v12 06/22] crypto: amlogic - Drop status field from meson_flow
Alexey Romanov
- [PATCH v12 07/22] crypto: amlogic - Move algs definition and cipher API to cipher.c
Alexey Romanov
- [PATCH v12 08/22] crypto: amlogic - Cleanup defines
Alexey Romanov
- [PATCH v12 09/22] crypto: amlogic - Process more than MAXDESCS descriptors
Alexey Romanov
- [PATCH v12 10/22] crypto: amlogic - Avoid kzalloc in engine thread
Alexey Romanov
- [PATCH v12 11/22] crypto: amlogic - Introduce hasher
Alexey Romanov
- [PATCH v12 12/22] crypto: amlogic - Use fallback for 192-bit keys
Alexey Romanov
- [PATCH v12 13/22] crypto: amlogic - Add support for G12-series
Alexey Romanov
- [PATCH v12 14/22] crypto: amlogic - Add support for AXG-series
Alexey Romanov
- [PATCH v12 15/22] crypto: amlogic - Add support for A1-series
Alexey Romanov
- [PATCH v12 16/22] dt-bindings: crypto: amlogic,gxl-crypto: correct clk and interrupt lines
Alexey Romanov
- [PATCH v12 17/22] dt-bindings: crypto: amlogic,gxl-crypto: support new SoC's
Alexey Romanov
- [PATCH v12 18/22] arm64: dts: amlogic: gxl: correct crypto node definition
Alexey Romanov
- [PATCH v12 19/22] arm64: dts: amlogic: a1: add crypto node
Alexey Romanov
- [PATCH v12 20/22] arm64: dts: amlogic: s4: add crypto node
Alexey Romanov
- [PATCH v12 21/22] arm64: dts: amlogic: g12: add crypto node
Alexey Romanov
- [PATCH v12 22/22] arm64: dts: amlogic: axg: add crypto node
Alexey Romanov
- [PATCH] pinctrl: amlogic: Staticize some local structs
Linus Walleij
- [PATCH] pinctrl: meson-g12a: add g12b pwm groups
Linus Walleij
- [PATCH v3 4/6] clk: meson: t7: add support for the T7 SoC PLL clock
Jian Hu
- [PATCH v3 4/6] clk: meson: t7: add support for the T7 SoC PLL clock
Jerome Brunet
- [PATCH 00/32] drm/mipi-dsi: avoid DSI host drivers to have pointers to DSI devices
Luca Ceresoli
- [PATCH RFC 12/32] drm/meson: dsi: remove unneeded DSI device check
Luca Ceresoli
- [PATCH 1/5] dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
Rob Herring (Arm)
- [PATCH 2/5] dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
Rob Herring (Arm)
- [PATCH 3/5] dt-bindings: mailbox: Correct example indentation
Rob Herring (Arm)
- [PATCH 4/5] dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
Rob Herring (Arm)
- [PATCH 5/5] dt-bindings: mailbox: Drop consumers example DTS
Rob Herring (Arm)
- [RFC] mmc: meson-gx-mmc: add delay during poweroff
Da Xue
- [PATCH] clk: amlogic: remove unnecessary headers
Jerome Brunet
Last message date:
Mon Jun 30 03:00:16 PDT 2025
Archived on: Mon Jun 30 03:14:26 PDT 2025
This archive was generated by
Pipermail 0.09 (Mailman edition).